3ac70670ef
- Eliminate 'conf.h' from MIPS common code.
1999-03-15 02:47:10 +00:00
17e168c9b3
- Nuke old leftover; round four. This file has little usefuls, and
...
target MIPS ports are expected to have 'machine/conf.h' if necessary.
1999-03-15 02:43:48 +00:00
07e094073c
Remove bogus comment.
1999-03-15 02:26:10 +00:00
da1be4ffd8
Fix mkdep ``cc: No input files'' error when SFILES is empty.
1999-03-15 01:55:32 +00:00
10b5625b87
- Nuke old leftover; round three. Remove never-used functions.
...
XXX Needs to eliminate TURBOchannel exposure here.
1999-03-15 01:54:56 +00:00
b4374e3ce0
Implement badaddr() and trap machine-check in badaddr.
1999-03-15 01:29:07 +00:00
ef79649fc1
MI ioasic softc and child-device structs, gc duplicate struct definitions.
...
Add MI ioasic functions, but dont enable on alpha until tested.
1999-03-15 01:25:26 +00:00
b0eb09de11
remove lderr in "make clean"
1999-03-15 01:15:06 +00:00
c1122adb50
delete netbsd.aout and netbsd.ecoff in "make clean"
1999-03-15 01:12:00 +00:00
e1c9a578a8
New CHANGES files that describes briefly all nontrivial changes made to
...
the LFS since the 4.4lite2 code was merged into NetBSD.
TODO updated to remove everything marked DONE in 4.4, and add in a list
of more current things to do.
Get rid of comments about the cleaner syscall code and missing fragment
support from README.
1999-03-15 00:46:47 +00:00
462ac41141
if an mfs i/o is successful, set b_resid to 0.
...
this allows the vnd driver to work on mfs files.
1999-03-15 00:18:24 +00:00
78bc84c223
Clean up initializers for pmax ioasic children. Use same struct as alpha.
1999-03-14 23:59:53 +00:00
e662ad5ecc
Clean up names for SCC interrupt bits.
1999-03-14 23:59:03 +00:00
ba07737bc0
Use the 1/256s-resolution when reading the DraCo battery backed clock
1999-03-14 22:42:12 +00:00
69d2d27c1b
Use bus_space tags and handles, embedded in MD hooks AM7930_{READ_WRITE}_REG
...
to handle MD delay and bus padding. Tested on sparc2 by David Brownlee.
Should use regmaps, but that breaks sparc pDMA assembly code.
1999-03-14 22:29:00 +00:00
2ec2c2045f
Cleanup rf_RewriteParity() and rf_VerifyParity(). Nuke unused stuff,
...
and make more readable.
1999-03-14 22:10:46 +00:00
414b788837
Disallow interrupting parity re-writes or copybacks by removing PCATCH
...
from the tsleep()'s (they probably shouldn't have been there in the
first place!). Making parity re-writing and copybacks interruptable
will require re-designing how a few things are done (e.g. how memory
is freed for structures shipped off to routines that run asynchronously
relative to the calling routine). Fix a few other tsleep's while we're at it.
1999-03-14 21:53:31 +00:00
1ff51fea1a
Some x68k conditionals (I don't know why these are needed...).
1999-03-14 16:14:54 +00:00
deab09f540
Only need one of vga_isa and vga_pci.
1999-03-14 10:34:18 +00:00
cac14a50bc
Update to -current, switch to wscons.
1999-03-14 10:31:43 +00:00
00c8d4dd90
changed dma start alignment from 4 to 16 so that the cache flush
...
functions always have cache line aligned segments.
continued experimentation with scsi driver.
1999-03-14 10:31:05 +00:00
58d4f7ae24
Add support for future PicassoIV's which use an autoconfig space of 64MB.
...
The framebuffer base address is then at a different offset.
The patch is from Klaus Burkert.
1999-03-14 09:17:19 +00:00
82f8a7dee9
Turn off biosboot_ser until makefile issues get worked out..
1999-03-14 05:50:38 +00:00
6d636069d6
Allow "make depend" to work again. (It currently freaks out since the
...
SFILES variable is empty...)
1999-03-14 05:03:35 +00:00
4f3756d205
Define id_t, an integral type wide enough to hold a value of type gid_t, pid_t
...
or uid_t (SVID/XSH5).
XXX Unlike the System V definitions and pid_t, [gu]id_t are unsigned here.
1999-03-14 01:24:18 +00:00
e4dd1abb05
Merge contents of filesystem.c into conf.c, and remove declaration of
...
errno from conf.c and put it in boot.c.
1999-03-14 00:57:06 +00:00
35d517b9f1
Hack to make biosboot_ser work.
...
XXX The makefile structure in src/sys/arch/i386/stand is very bad.
1999-03-14 00:04:06 +00:00
bed6716015
Identify the chip type when attaching.
1999-03-13 22:43:30 +00:00
195403fe38
malloc the arg temporary buffer, rather than declaring it as an automatic
...
array of ARG_MAX size. ARG_MAX is currently 256k, which causes a rather
serious stack overflow (kernel stacks are not very large, usually 8k).
Fixes memory corruption problems observed after accessig /proc/1/cmdline
during tests. Problem in my case manifested itself as massive lossage
in ffs_sync(), resulting in a crash, and sometimes, pooched file systems.
XXX This could, and probably should, be rewritten to use a much smaller
temporary buffer, and a loop around uiomove().
1999-03-13 22:26:48 +00:00
a02a989bcf
The 53c720 and up are really different. For example, the method to determine,
...
when disconnecting etc., how much data were transferred, has changed.
Symptom: SIOP invalid instructions when doing data transfers to disks that
disconnect.
XXX The bits etc. need to be defined correctly in the siopreg.h file, and
symbolic values used.
1999-03-13 21:30:55 +00:00
32e0182e15
$(OBJS) -> ${OBJS}
1999-03-13 20:58:25 +00:00
4d77aa3c15
Avoid warning if !QBA.
1999-03-13 20:26:50 +00:00
c0433847af
make complaints about missing platform support match reality
1999-03-13 19:46:58 +00:00
48c33b2e56
Adjust to match the assembled code
1999-03-13 19:42:52 +00:00
0c86849162
Oops, forgot this file.
1999-03-13 15:44:01 +00:00
f9b0eec83a
Change vsbus to take a locator for all devices.
...
Figure out interrupt vector/mask on vsbus by forcing all devices to
generate interrupts in the match routine, like on unibus.
1999-03-13 15:16:47 +00:00
9f6b94f820
Outdated files.
1999-03-13 15:14:29 +00:00
7cfac216d7
Don't initialize any virtual screens (except the system console) at
...
autoconfiguration time; this can be done better from rc.local.
(For INSTALL kernels, WSDISPLAY_DEFAULTSCREENS can be defined which
sets up that many screens with default parameters.)
1999-03-13 14:46:20 +00:00
b2cc9c9bc2
pull in missing miscfs/procfs/procfs_cmdline.c
1999-03-13 14:29:27 +00:00
98294086d9
make this compile again
1999-03-13 14:09:46 +00:00
71f26e545a
pull in a part of [nisimura-pmax-wscons] rev 1.5.4.3: remove unneeded
...
kdbpeek() prototype
1999-03-13 13:16:29 +00:00
6bcfb2cd72
g/c regdef.h
1999-03-13 13:07:43 +00:00
93d26ccd4b
g/c regdef.h (went into asm.h)
1999-03-13 13:05:49 +00:00
7482575685
regdef.h is gone
1999-03-13 11:24:59 +00:00
0265284ce4
This file is unneeded since <mips/regdef.h> went into <mips/asm.h>.
1999-03-13 11:24:11 +00:00
2b8eb20358
Remove unneeded <mips/regdef.h>. Its contents went into asm.h while ago.
1999-03-13 11:20:55 +00:00
4865d6ff88
Some changes to `cmdline' to make it work properly:
...
- Don't error out on P_SYSTEM or SZOMB processes; instead, do what ps(1)
would do, i.e. the p_comm in parenthesis.
- Use uvm_io() (or procfs_rwmem() if !UVM) to read the target process's
psstrings and argument vector. Using copyin() is problematic, because
it operates on the current processes! That is, the old code would
always get the `cmdline' of the process reading the file, not that of
the target process.
1999-03-13 01:01:30 +00:00
5e7b128211
Expose procfs_rwmem(). (This function will go away entirely when we
...
delete Mach VM.)
1999-03-13 00:57:13 +00:00
9797e6cf17
Pad out mips1 inter-tick delay loop with two nops, to match
...
gcc-2.7.2.2+myc1 calibration.
XXX rewrite in assembler to remove compiler dependency.
1999-03-13 00:05:39 +00:00
21ce7a4f23
nuke ovbcopy reference
1999-03-12 23:08:11 +00:00
nisimura