Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
46,131 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

46131 Commits

Author SHA1 Message Date
pk d92652f4ae Check the results of argument decomposition in octets to prevent 
garbage being sent to name servers.
 1998-12-05 13:17:55 +00:00
pk 66bc493d73 Make a network number by shifting out host bits in octet units. 
This is currently required still to get correct lookups in `/etc/networks'.
 1998-12-05 13:14:04 +00:00
dbj 8f7f8d557d made prototype for debug function wss_dump_regs match its definition. 1998-12-05 10:49:24 +00:00
jonathan 340efce0ea Track PV_REFERENCED bit as for PV_MODIFIED, to make mdsetimage work correctly. 
Compatiblity with Mach VM: clear pmap-private bits in pmap_remove() if !UVM.
 1998-12-05 09:13:09 +00:00
jonathan aecf708ee3 Clean up kernel PTE allocation. Allocate space for maxproc kernel stacks. 
Bump UVM swap-map to avoid panics on large swap machines.
 1998-12-05 07:50:12 +00:00
jonathan d4cce0d780 Make ramdisk and ne-tbootable ramdisk-based instkernel on pmax. 1998-12-05 07:33:13 +00:00
jonathan 92fda0ceb3 Define NLIST_ELF32 for mips native format. Also NLIST_ECOFF (pmax, arc PROMs) 
NLIST_AOUT (old pmax bootblocks).
 1998-12-05 07:30:38 +00:00
jonathan ea1aa3511c #ifdef _KERNEL around cpu_exec_ecoff_setregs() prototype. 1998-12-05 07:26:11 +00:00
jonathan b18f6fc2aa Set VER and REL for miniroot. 1998-12-05 06:42:55 +00:00
itohy 6b676a3cca getcwd() is not equivalent of getwd() if you want to print an error message. 1998-12-05 03:29:25 +00:00
mjacob 9d51ff8e34 Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which 
one gets compiled in by default. The default is private loop, non-expanded lun.
 1998-12-05 00:28:05 +00:00
mjacob 45fb6a3e74 Add in and enable latest SBus ISP Firmware (1.31) 1998-12-05 00:25:26 +00:00
drochner 3a08ae9402 always use unsigned numbers for screen positions (for sanity - the libkern 
min() et al. did unsigned comparisions before)
make ROWS_ABOVE / ROWS_BELOW return signed values, the negative results
occur if the cursor is outside the scrolling region
 1998-12-04 20:48:04 +00:00
thorpej 7fa243e59e Pass the symbol table size, like a.out. 1998-12-04 20:22:36 +00:00
thorpej 2d7f8f3343 Support both a.out and Elf32 symbols in DDB. 1998-12-04 20:19:22 +00:00
thorpej c89493522f - Make the ddb_init() interface consistent for a.out and ELF. 
- Allow DDB to run-time switch for a.out or ELF symbol table support.
 1998-12-04 20:18:05 +00:00
abs 05c432cdd9 From OpenBSD: ignore requests with bogus network types 
Also fix 'from from' -> 'from'
 1998-12-04 18:24:16 +00:00
perry ff669e2e1a Small bug fix from Soren S. Jorvang (soren@t.dk) 1998-12-04 17:47:06 +00:00
mycroft 21bf4404e6 GC some unused code. 1998-12-04 17:35:53 +00:00
drochner 9175cc0ddf The chipset manual doesn't tell the truth about the channel enable 
register bits. Replace by experimental result.
 1998-12-04 17:30:55 +00:00
mycroft 79410cf933 Switch the reloc type to GOT32 earlier, and do not permit GOT32 relocs to be 
turned into section-relative relocs.
 1998-12-04 17:22:52 +00:00
bouyer c10f6edafc AT_ERROR should be different from AT_TIMEOUT. pointed out by Matthias Drochner. 1998-12-04 11:17:54 +00:00
bouyer 433c02431e Init the decriptors at boot time rather than at interface attach time. 
Now that we have pcmcia hot-plug, it's not the same. Fixes kern/3189.
 1998-12-04 11:04:37 +00:00
bouyer cdbe530495 No need to #include malloc.h here. 1998-12-04 11:02:30 +00:00
bouyer 3efc699962 Sanity check a few values in the superblock, to avoid mallocing huge 
memory area if we try to mount a corrupted filesystem. Fixes kern/3933.
 1998-12-04 11:00:40 +00:00
nisimura 75ff38a27d - Fix an error in primary cache line size detection logic; when IC and/or DC 
bit is 1, then line size is 32.  Otherwise, 16.
 1998-12-04 10:32:08 +00:00
mycroft 317ff12487 Slight cleanup. 1998-12-04 09:52:43 +00:00
nisimura 9f33638436 - Fix and improve confusing indentations inside trap(). 
- Don't make a reference of curproc when it has NULL value.  It causes
double fault upon a fatal panic ocation.
- Macro FETCH_INSTRUCTION() took a value of address 0.
-
 1998-12-04 04:35:44 +00:00
sakamoto 0bba7a7eca Not used. 1998-12-04 00:17:49 +00:00
pk 1673c21984 Enable `device_register()' for the sparc. 1998-12-03 23:50:11 +00:00
pk 5d9f86821c Add a device_register() function to determine the boot device. 
Use it in addition to the old method for a while, so we can take note
of any glitches easilier.
 1998-12-03 23:49:58 +00:00
pk 19f705b094 Cast bus_space_{read,write}_multi arguments. 1998-12-03 23:33:45 +00:00
thorpej 6b7fe574f7 Use getcwd(3) instead of getwd(3). 1998-12-03 23:33:10 +00:00
augustss ef51366cb7 Handle flags better. 1998-12-03 20:46:10 +00:00
augustss a68f1ef94c Handle the case where the device does not support GET_PEPORT better. 1998-12-03 20:43:19 +00:00
augustss bedb40a78c Use umodem as the modem driver stub. 1998-12-03 19:58:09 +00:00
bouyer 47ab212504 Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the 
ata_drive_datas struct. Suggested by Soren S. Jorvan.
 1998-12-03 18:24:30 +00:00
frueauf aa66b9fc72 Use $out correctly, pointed out in pr 6526 by Dave Huang. 1998-12-03 18:17:45 +00:00
cgd 244d803bb3 per e-mail with christos: history_next_event() should return -1, not NULL, 
in case of error, just like history_prev_event() does.
 1998-12-03 17:51:16 +00:00
bouyer 71f33dbfa5 UDMA->Ultra-DMA in a printf 1998-12-03 17:30:32 +00:00
bouyer 334abc06cf Correct definition for SIS_TIM_UDMA_EN macro. Ultra-DMA should now work ... 1998-12-03 17:29:01 +00:00
bouyer e39a5bdc53 Now that vtophy() is no longuer used, re-enable WDCDEBUG, with 
wdcdebug_pciide_mask = 0 (so that one can easily patch this variable and give
me more informations :)
 1998-12-03 17:27:57 +00:00
mycroft 3934bd1d8b More bug fixes from Richard Earnshaw: 
* Fix problems with moving constants smaller than the word size.
* Fix problems with CSE trying to shortcut PIC references.
 1998-12-03 16:05:47 +00:00
mycroft dedf21f286 Put back code to use pc-relative branches in the PLT, and avoid doing cache 
flushes.
 1998-12-03 15:56:51 +00:00
mycroft 26fce3548b Use the `first' argument to md_fix_jmpslot(). 1998-12-03 15:46:28 +00:00
bouyer 2b28c858d8 add a udma_mode field to wdc_softc, and use it the same way dma_mode is used 
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
 1998-12-03 15:38:59 +00:00
oster 1b04131eff Try a bit harder to detect the physical failure of a component, and to 
mark that component as dead.  Physical failures are handled much better now.
 1998-12-03 15:14:40 +00:00
oster 3f3d8e85e6 If a configuration fails due to a non-existant spare, remember to release 
any previously allocated components before bailing.  Credit to Manuel Bouyer
for noticing this.
 1998-12-03 15:06:25 +00:00
oster 679de7e878 Fix (potential) referencing of null pointer in (verbose) debugging mode. 1998-12-03 14:58:24 +00:00
bouyer ba90b4b2d3 Add URLs of documentation source (from Matthias Drochner). 1998-12-03 14:06:16 +00:00