While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.
Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.
conf/GENERIC:
conf/files.amiga:
- Bring in wsfont definitions.
dev/grfabs_reg.h:
- Add macros for decomposing palette entries.
dev/amidisplaycc.c:
- Support for fonts, either wsfonts compiled into kernel
or runtime-loadable by ioctl. Font width still limited to 8,
height may vary.
- Limited support for mapped displays. No way to adjust display
mode. Palette setting works.
- Prettier default palette (white on black).
- Probes correctly as WSDISPLAY_TYPE_AMIGACC.
- Support for screen blanking.
export the label we use for that purpose, otherwise, that smart gas will
change it to a relative jump, which does basically nothing.
I can finally boot NetBSD/amiga ELF. (Yippee!)
While there, test if we are a 68851 before we invalidate the TLB,
instead of doing it between the TLB flush and the data cache flush.
First stage is bootxx_ffs (for ffs boot partitions) or bootxx_fd (for bootable
floppy disk). These locate, load, and execute the second stage loader boot.amiga.
The console screen is created and passed to the second stage loader.
The second stage loader uses loadfile() to load the kernel image, which can
be either a.out or ELF format, and can also be compressed. It will load a
kernel file from ffs file systems or the ustarfs used on floppy disks.
one, so that we don't mess up the global count of wired pages by having
the page's wire_count be non-zero when we free the page.
pointed out by Michael Hitch.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
uvm_fault_wire(). this allows us to make pt_map non-pageable,
but we need to be careful in pmap_remove() not to attempt to
reference PTEs after the PTP has been freed.
interrupts.
This allows hardclock() to account for the time spent in interrrupts, and
as a side-effect, top(1), systat(1) and others will no more report 0% of
interrupt activity.
mvme68k does that already.
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.
Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.
Actually, this is added to the siop2_script; should we ever support another
siopng board that does connect something else to GPREG bit 4, we'll have
to move this to C code and make it optional.
OTOH, by then we'll have switched to the MI driver by then.
This will allow improvements to the pmaps so that they can more easily defer expensive operations, eg tlb/cache flush, til the last possible moment.
Currently this is a no-op on most platforms, so they should see no difference.
Reviewed by Jason.
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.
options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory
If anyone thinks that this is incorrect for any of these files, please
correct it.
Note - the i386 port was not forgotten. It was done separately.
each vm_page structure. Add a VM_MDPAGE_INIT() macro to init this
data when pages are initialized by UVM. These macros are mandatory,
but ports may #define them to nothing if they are not needed/used.
This deprecates struct pmap_physseg. As a transitional measure,
allow a port to #define PMAP_PHYSSEG so that it can continue to
use it until its pmap is converted to use VM_MDPAGE_MEMBERS.
Use all this stuff to eliminate a lot of extra work in the Alpha
pmap module (it's smaller and faster now). Changes to other pmap
modules will follow.
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
- pmap_enter()
- pmap_remove()
- pmap_protect()
- pmap_kenter_pa()
- pmap_kremove()
as described in pmap(9).
These calls are relatively conservative. It may be possible to
optimize these a little more.
call overhead is incurred as we start sprinkling pmap_update() calls
throughout the source tree (no pmaps currently defer operations, but
we are adding the infrastructure to allow them to do so).
and use appropriately
- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well
- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)
- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev
- ensure that the comments are accurate WRT the behaviour of a given entry
We default to the (newer, more sane) 22.1184 MHz value, but set it from
the iobzclock variable (in Hz), which is initialized from the IOBZCLOCK
configuration option and patchable.
XXX we should time the clock at system startup.
- add ioblix_zbus to the GENERIC configuration.
a constant PAGE_SIZE value didn't include setting the UVM pagesize, and the
attempt to add this ended up in the wrong place. Amiga should now boot
again.
and place the definition in <machine/types.h>. This can now be used
as a flag to indicate whether or not <machine/intr.h> can be included
to get the generic soft interrupt API.
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
only signal handler array sharable between threads
move other random signal stuff from struct proc to struct sigctx
This addresses kern/10981 by Matthew Orgass.
XXX I wish m68k ports would share trap.c
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
