MAKEDEV, MAKEDEV.subr and MAKEDEV.local in the set of files that are
copied if they exist.
Now booting an INSTALL kernel with an embedded ramdisk correctly creates
/dev again, fixing a problem introduced when MAKEDEV.subr was created a
few days ago.
ffs_checkver() and later use it in the switch statement, just
use ffs_checkver.
* Remove unneded <sys/queue.h> header.
* Remove LFS from fstypes, it was never used.
* Increase SBCOUNT to 128, works faster.
* Remove unneded casts.
* (-F mode) close fd when the scan has finished or if pread() failed.
* (-F mode) print total size of file.
Here the bitmaps are written as
CLRI or BITS with c_count <= 512
ADDR* for the remaining blocks
Remove the bitmap handling from getfile(), remove xtrmap() and xtrmapskip().
Add new function getbitmap() modeled after getfile() that does bitmap
allocation, bitmap expansion and sets maxino.
Reviewed by: Manuel Bouyer <bouyer@netbsd.org>
* Replaced atoi() with parse_int().
* Use an enum for ACTION_* instead of #define.
* Use strdup() or asnprintf() instead of strlcpy() to avoid truncation.
* pread() returns ssize_t not int.
* Suppress "unused parameter" warnings.
* verify_disklabel(): Pass the correct size to disklabel_scan().
* verify_ffs():
* Don't indicate success if pread() fails.
* Check the amount of bytes read.
* Don't cast buf to (struct fs *), it's not aligned.
* eliminate_cores(): No need for a temporary variable.
logical operation, rather than compliment, as in praise, the magic
number of the disk.
There are probably other instances of this in the tree. We should fix
them.
also (and ICMP is implied) and that other types are blocked.
Point to pf(4) and pfil man pages.
Based on discussion in January 2006 on tech-kern. (This has been
in my tree for around 11 months.)
This part of my work to change this (and related to use) pfil (instead
of ipf). That is done back then but needs some testing.
sysctl.7. Remove the list of MIBs from sysctl.8 so we don't have to
maintain duplicate information, as proposed by YAMAMOTO Takashi on
tech-userlevel. Also remove references to header files from sysctl.8.
The numeric constants remain documented, they are still needed in some
cases. See the discussion on tech-userlevel. ("mib list in sysctl.8")
OK by YAMAMOTO Takashi.
in entries for Veriexec.
This has been requested for a long time, most recently by Brad Harder.
Thanks a lot to Michael van Elst for the patch, done during the latest
hackathon.
Obviously, this breaks the already unstable Veriexec ABI, but that's
it. Some cool additions are planned to be introduced, and this just
makes it so that NetBSD 4.0 users will be able to easily use them as
well.
This also removes the fingerprint type name limit, so relevant code
was adjusted.
Thoroughly tested (even uncovered a bug in proplib! thanks for fixing
that cube@!). Documentation updated.
The progress bar will now travel from 0 to 20% during pass 1, from 20%
to 95% during pass 2, and from 95% to 100% during passes 3, 4, and 5.
Previously, the progress bar was not displayed at all during pass 1,
slowly traveled from 0 to about 50% during pass 2, and then very rapidly
traveled from 50% to 100% during passes 3, 4, and 5.
Note that fsck_ffs is the only user of fsck/progress.{c,h}.
Also, add ioctls SIOCGIFADDRPREF/SIOCSIFADDRPREF to get/set preference
numbers for addresses. Make ifconfig(8) set/display preference
numbers.
To activate source-address selection policies in your kernel, add
'options IPSELSRC' to your kernel configuration.
Miscellaneous changes in support of source-address selection:
1 Factor out some common code, producing rt_replace_ifa().
2 Abbreviate a for-loop with TAILQ_FOREACH().
3 Add the predicates on IPv4 addresses IN_LINKLOCAL() and
IN_PRIVATE(), that are true for link-local unicast
(169.254/16) and RFC1918 private addresses, respectively.
Add the predicate IN_ANY_LOCAL() that is true for link-local
unicast and multicast.
4 Add IPv4-specific interface attach/detach routines,
in_domifattach and in_domifdetach, which build #ifdef
IPSELSRC.
See in_getifa(9) for a more thorough description of source-address
selection policy.
1. don't print the program name in the message [syslog does it]
2. no extraneous \n [syslog takes care of it]
3. quote strings as `%s' [we are using syslog]
4. use %m instead of error = %d
and -host flags, which is useful for displaying/flushing ARP entries:
# route -n show -inet -llinfo -host
Routing table
Internet:
Destination Gateway Flags
169.254.1.119 link#1 UH
169.254.230.110 00:02:6f:21:e6:6e UH
# route -n flush -inet -llinfo -host
169.254.1.119 done
169.254.230.110 0.2.6f.21.e6.6e done
169.254.237.70 done
# route -n show -inet -llinfo -host
Routing table
#
This will help me address bin/11079, "dhclient may require arp and sed".
Extract common code from flushroutes() and show(), creating
parse_show_opts().
While I'm here, make small cosmetic changes to flushroutes().
"execute a command" ioctl that takes a dictionary as an argument
(specifying the command and arguments) and returns a dictionary
with the results (error code, optional error message, optional
result data).
- Define and implement a "get-properties" command for DRVCTLCOMMAND
that returns the properties dictionary of the specified device.
- Add a -p flag to drvctl(8) to fetch and display the properties of
the specified device.
This is a great example of how to use prop_dictionary_sendrecv_ioctl().
First one was incorrectly loading entries -- we were treating each file as
a mount, which resulted in huge mess. I have no excuse for how I didn't
catch this earlier.
Second, use the table name we create for the Veriexec sysctl node and not
the fixed "table0".
Both are fileassoc(9) integration fallout.
Both available for IPv4 and IPv6.
Basic implementation test results are available at
http://netbsd-soc.sourceforge.net/projects/ecn/testresults.html.
Work sponsored by the Google Summer of Code project 2006.
Special thanks to Kentaro Kurahone, Allen Briggs and Matt Thomas for their
help, comments and support during the project.
Fix MOBILE encapsulation. Add many debugging printfs (mainly
concerning UDP mode). Clean up the gre(4) code a bit. Add the
capability to setup UDP tunnels to ifconfig. Update documentation.
In UDP mode, gre(4) puts a GRE header onto transmitted packets,
and hands them to a UDP socket for transmission. That is, the
encapsulation looks like this: IP+UDP+GRE+encapsulated packet.
There are two ways to set up a UDP tunnel. One way is to tell the
source and destination IP+port to gre(4), and let gre(4) create
the socket. The other way to create a UDP tunnel is for userland
to "delegate" a UDP socket to the kernel.
auto flag, which queries all local harddisks for swap partitions/
wedges and adds/removes them as swap device, a -f option to use the
first found swap device as dump device, and a -o option to only
auto-configure the dump device, but leave swap alone.
Add a -n option to make swapctl only say what it would do, but not
change any system state.
struct disklabel.
Functionality lost:
1. struct disklabel used to be updated to contain bsize, fsize, cpg.
This information was used to locate the alternative superblock in
the filesystem if the primary superblock was corrupted. We need
to find a new place to store this information if we need this
functionality.
2. On vax SMD drives that contained bad sector lists, the newfs program
knew how to get the offset and skip to the correct location in order
to place the label.
so that we don't run multiple fsck's on the same spindle at the same time!
- Add some partition getting utilities that are wedge aware (soon to be able
to use the native geometry ioctl), so that we can fsck wedges.
is NOT disarmed when wdogctl closes the watchdog device. The -x
mode protects against the case where the kernel kills wdogctl,
sshd, and other essential userland programs (due to memory exhaustion,
for example), lobotomizing a mission-critical NetBSD system and
necessitating an operator visit to reboot it.
