385ed7074b
This now works properly and uses interrupts. If you close the lid, the
...
screen will turn off and when you open the lid screen turns on. If you
do too rapidly, the driver won't be notified but you can press the micro
switch and it will come back. Also "halt -p" now works so you don't
have to do Pause-P to powerdown.
1999-08-11 00:46:06 +00:00
14693e0ca1
Modify comments regarding VOP_LOOKUP. Revised lookup description, and also
...
document both cases which can set PDIRUNLOCK.
Reviewed by Bill Sommerfeld.
1999-08-11 00:20:50 +00:00
6be04b7f5c
Move cpu_info and related info into <machine/cpu.h>, and implement the
...
other MP API components discussed on tech-smp.
1999-08-10 23:35:43 +00:00
213802d0d3
Pull in <machine/cpu.h> in the MULTIPROCESSOR case to get curcpu() for
...
use in the `curproc' declaration. Note that machine-dependent code can
still override `curproc' in the single- and multi-processor case as before,
for its own convencience (the SPARC port does this, for example).
1999-08-10 23:33:27 +00:00
31b98d3572
When reporting the status of a component during configuration,
...
provide more intuitive information about whether a component is clean
or not.
1999-08-10 22:56:20 +00:00
620eda50c7
Don't allow reconstructs, copybacks, or forced failures of components if
...
using a RAID 0, since RAID 0 can't handle those sorts of things.
1999-08-10 22:46:59 +00:00
0b08c839eb
Don't go ape if there is a problem verifying the parity. Note the condition
...
and inform the user (as opposed to panicing the system!).
1999-08-10 22:19:27 +00:00
ead3c28a8d
Leave ^Z-handling to the system (curses? no idea, at least it works :-),
...
and don't wait for two seconds when game is over.
1999-08-10 21:52:43 +00:00
49efd10006
Oops. Make minor change that I forgot when adding the parity check ioctl.
1999-08-10 21:41:37 +00:00
cca4496da7
Use cpuid_t and cpu_number().
1999-08-10 21:10:20 +00:00
402c277c43
Add a cpuid_t typedef (u_long).
1999-08-10 21:09:18 +00:00
28fb7c1eb8
Define cpu_number() as discussed on tech-smp.
1999-08-10 21:08:05 +00:00
c8b0d04949
Fix wrong array size calculation in call to memset() and avoid a possible
...
segmentation fault in memmove(). Patches supplied by Stephan Thesing in
PR bin/8184.
1999-08-10 20:09:02 +00:00
b701be7c86
Use atomic operations to manipulate the SSIR, and fix a problem introduced
...
with the spllowersoftclock() changes where more interrupts than necessary
were blocked while software interrupts were being processed.
1999-08-10 18:53:03 +00:00
d0740fb357
Add two more options to raidctl:
...
-p check (and return) the status of the parity
-P check the status of the parity, and rebuild if necessary
Addresses PR#7494
1999-08-10 18:21:39 +00:00
a3aefdaee3
Add support for easily checking the parity status from userland.
...
Also: spl protect rf_RewriteParity().
1999-08-10 18:18:30 +00:00
ce3252697d
u_char -> u_int8_t in the IPv6 goo.
1999-08-10 18:16:07 +00:00
1e7a66ebab
Handle the 'custom' case in a sane fashion (do not create zero length
...
partitions under any circumstances, allow no swap, do not *overwrite* /usr
when listing additional partitions, and try to abstract at least most of the
magic numbers to #defines at the top.
Also sync up as much as possible to make this easier in future.
Still need to attack the other arch's md.c files.
1999-08-10 15:54:55 +00:00
0536609b97
Keep track of the number of encountered symlinks and fail with ELOOP
...
if they exceed MAXSYMLINKS.
1999-08-10 13:03:11 +00:00
4f5d78ae59
s/(sbus | obio)/sbus for the sbus attachments. These were vestiges from
...
the old code.
1999-08-10 12:50:35 +00:00
d04fb757d6
Correct comment about family 6 not being available from AMD, since that's
...
no longer true.
1999-08-10 12:16:13 +00:00
fbcdd32245
Recognize K7^WAthlon
1999-08-10 12:00:50 +00:00
be4c7c3513
split bwtwo driver in obio and sbus parts
1999-08-10 05:04:08 +00:00
072b17778f
split bwtwo driver in sbus and obio parts.
1999-08-10 04:56:30 +00:00
74b698556b
Cross-compile support: allow -B option to specify directory for backend
1999-08-10 03:35:30 +00:00
a531d8c31e
Trying to rebuild parity on a degraded set is bogus, so don't allow that.
...
Also, check sooner for a RAID 0 set, since rewriting parity makes no
sense there either.
1999-08-10 01:53:26 +00:00
47ea8c31ac
added reference to bsd.crypto.mk to Makefile. whoops.
1999-08-09 22:46:16 +00:00
58f27ba58c
Added .PARSEDIR and .PARSEFILE variables to make(1).
1999-08-09 21:06:28 +00:00
708391677c
Add nullfs, umapfs, unionfs to the list of exportable filesystem types, now
...
that these FSs are in fact exportable. (Left over from PR 5603.)
1999-08-09 20:22:39 +00:00
ede200e1ab
Add a driver for the Tadpole SPARCbook microcontroller. It doesn't
...
do much yet (except for power down support). As sson as I figure
out to get its interrupts enabled, it will be much more functional.
(e.g., print console messages on low power warnings, be able to turn
off the TFT, etc.).
1999-08-09 18:39:58 +00:00
84e306ed83
Tadpoles don't use the standard sun4m power down hardware. So add
...
support for doing it the Tadpole way.
1999-08-09 18:35:58 +00:00
1b0bd3757f
add entries for the tadpole microcontroller (tctrl) and the
...
tadpole pcmcia controller (tpcic). Drivers for the former will
show up today, and the latter later this week or next weekend.
1999-08-09 18:34:43 +00:00
1a79367a5f
Add NetBSD RCS Id, note that "device timeout" can be caused by a
...
mis-configuration and can be solved with wiconfig(8).
1999-08-09 18:23:44 +00:00
0e25033c56
Add wi(4), from FreeBSD.
1999-08-09 18:19:24 +00:00
385f47fe73
Add wi at pcmcia.
1999-08-09 18:13:26 +00:00
68746d569a
add myself back to the developers list
1999-08-09 17:57:18 +00:00
daa44a5758
do not make reverse query against IPv6 unspecified, or loopback addresses.
...
From: ume@mahoroba.org
1999-08-09 15:00:14 +00:00
26297cb6e9
PR/8178:Julian Coleman: sparc kernel will not build with cgtwo/cgsix but
...
without sbus. Remove call to cgsix-sbus-attach (impossible code). Make
routines static (they were declared static, but not defined static and
some compilers can complain).
1999-08-09 12:16:10 +00:00
a9b7fe4621
return with doing nothing from xx_ctlinput(), when sa->sa_family
...
is not the expected one.
I see PRC_REDIRECT_HOST with sa->sa_family == AF_UNIX coming to
{tcp,udp}_ctlinput() when I use dhclient, and I feel like adding
more sanity checks, without logging - if we log it it is too noisy.
1999-08-09 10:55:29 +00:00
26db0bba90
Garbage-collect C_INUSE and C_NEEDDONE.
1999-08-09 09:56:00 +00:00
5885dbb878
- use pool(9) for wdc_xfer, instead of managing a free list.
...
- fix printing of Ultra-DMA modes (shows up when the drive supports highther
modes than the controller).
- Don't use C_NEEDDONE anymore. We were setting this flag in a possibly
freed wdc_xfer (this didn't create problems, as it was free'd in the POLL
case only, while IRQs are blocked, but it's not good practice anyway
and pool(9) complains about it ;)
1999-08-09 09:55:18 +00:00
7eb1fae5d3
Add a missing 'return' in previous commit.
...
Don't use C_NEEDDONE anymore (it's safe to always call scsipi_done()).
1999-08-09 09:49:48 +00:00
7e874499c9
Don't call wddone() from _wdstart(), the ata_wdc system will do it now.
...
call wd_flushcache() with the proper flags (especially don't set
AT_WAIT | AT_POLL).
1999-08-09 09:48:04 +00:00
c0da6c9129
Don't use C_NEEDDONE, it's deprecated.
1999-08-09 09:43:11 +00:00
098b1598f6
Put tc_machdep.h back in (needed to build the X server).
1999-08-09 09:25:19 +00:00
ff87f817c1
Call stopprofclock(p) from sys_execve().
1999-08-09 02:42:20 +00:00
7a60aa28c2
log() needs "\n" at the end.
1999-08-09 02:24:52 +00:00
1008019f62
Detect "ze" as root device.
1999-08-08 16:33:13 +00:00
38bced384f
Document -s option. Fixes PR 6759 by me.
1999-08-08 16:15:17 +00:00
d65340456a
do not use tbl for formatting.
...
From: "Heiko W.Rupp" <hwr@netbsd.org>
1999-08-08 13:27:30 +00:00
matt