1fc84bbd8d
Add explicit int types for egcs, and nuke register.
1998-03-30 06:05:39 +00:00
450748892d
Make the previous slightly less nasty.
1998-03-30 06:04:29 +00:00
38008a99e3
Add explicit int types for egcs, and nuke register.
1998-03-30 06:02:13 +00:00
ca86fc945e
<pmax/pmax/trap.h> has been obsoleted...
1998-03-30 04:45:50 +00:00
d4da63c6c3
Eliminate cs_heldchar. It is not necessary in my version of the driver.
1998-03-30 02:41:21 +00:00
b800227f95
Garbage-collect old code for direct attachment.
1998-03-30 02:34:25 +00:00
e7312dce1d
* Mouse reset blocks waiting for response for mouse.
...
Only initialize the mouse if we are using rcons as the console device.
1998-03-30 02:15:37 +00:00
692fe3cc96
Use a 4-bit table to speed up the CRC even further, without increasing the
...
code size too much.
1998-03-29 23:14:14 +00:00
a55cefe6b4
Initialize `par_err_reg' in the mainbus attach function.
1998-03-29 22:13:30 +00:00
b782c3448c
obio_bus_probe() => bus_space_probe()
1998-03-29 22:10:32 +00:00
2ad26b801c
Fill in the bus tag's `bus_space_unmap' method.
1998-03-29 22:06:58 +00:00
82663a0330
Implement `_obio_bus_map()' and insert it into the obio bus' bus tag.
...
Remove obio_bus_probe().
1998-03-29 22:05:05 +00:00
57a8159633
Enter `obio_find_rom_map()' prototype.
...
Make `oba_paddr' field a `bus_addr_t'.
Define temporary compat `obio_bus_map()'.
1998-03-29 22:02:46 +00:00
11928be0ff
`sparc_bus_mmap()' declaration moved to machdep.c
1998-03-29 22:00:33 +00:00
759c8965a3
Use `obio_find_rom_map()' explicitly instead of using `obio_bus_map()'
...
without a proper bus tag.
1998-03-29 21:59:44 +00:00
2f1dd95a2d
Declare `sparc_bus_unmap()' static.
1998-03-29 21:56:32 +00:00
8295d8475b
writedisklabel() always used the offset of the first partition in the MBR
...
to address the disklabel even if NetBSD resides on another partition.
1998-03-29 21:30:20 +00:00
47a62a0eed
use bitmask_snprintf.
1998-03-29 05:10:45 +00:00
b61e2629f2
remove register from decl.
1998-03-29 05:08:46 +00:00
8e25cfb973
Better integration of Power Manager IC ADB driver into the direct ADB driver framework,
...
from Takashi Hamada. Also includes a handler for unsolicited ADB
packets.
1998-03-29 03:50:30 +00:00
0e0d7a04aa
Split 3max (kn02) and 3maxplus (kn03, kn05) memory-error handling out
...
dec_3max.c into a shared file. These models have compatible memory
subsystems, the same memory slots, and (apparently) the same error reporting.
Add markers for where MNN probes for configurations with a mixture of
RAM sizes and for Prestoserve NVRAM (in normal RAM slots) should go.
1998-03-29 01:12:14 +00:00
f1821c7811
Adjust for recent ttyopen() and dialout device changes.
1998-03-28 23:49:06 +00:00
0ce9e8b825
We don't have software-only maps, so a NULL pmap_t will never be passed
...
to pmap functions.
1998-03-28 19:53:42 +00:00
2a65520c69
bus_space_probe() prototype.
1998-03-28 19:45:29 +00:00
cbc72091e5
Remove a comment that is not applicable in NetBSD - we don't have
...
software-only maps.
1998-03-28 19:44:49 +00:00
89444e9309
Implement generic bus probe function.
1998-03-28 19:44:08 +00:00
ce4810822b
Add autoconfiguration support for the Cypress 82C693 PCI-ISA bridge,
...
found on AlphaPC164SX boards.
Partially from Anders Magnusson <ragge@ludd.luth.se>.
1998-03-28 06:58:43 +00:00
7fa109343c
cope with name fixup in pcidevs
1998-03-28 02:12:02 +00:00
c0ac8bae67
GC alpha's ECOFF_TOOLCHAIN make variable, and related bits. Nobody
...
should be using an ECOFF toolchain on NetBSD/alpha any more.
1998-03-28 00:50:41 +00:00
4893f22399
Much more sane boot block builds, from Chris Demetriou.
1998-03-28 00:21:35 +00:00
66477b8680
Only call dosoftints() from splx if there is a soft interrupt actually
...
pending. This save us doing a function call and a bunch of instructions
for every splx() call. (Patch from cgd).
1998-03-28 00:14:51 +00:00
b6fa862ee6
Remove un-necessary prototype of set_boot_devs() (from cgd).
1998-03-28 00:06:03 +00:00
fcade25040
Make physlock global rather than a static local to mmrw() (from cgd).
1998-03-28 00:04:46 +00:00
56eaa22285
kill some unused variables that i missed in my last checkin
1998-03-27 23:39:57 +00:00
db74b327b9
fix a few bogus pointer checks (was checking pointers which would
...
never be against NULL, instead of checking the correct pointer against
NULL). Pointed out (with diff) to Mark Brinicombe on March 17, no reply.
1998-03-27 19:28:52 +00:00
a95651eaea
Add a PMAP_KERNEL_PTE() macro that returns the PTE for a given KVA. If
...
DEBUG, this performs a table walk. Othwise, the Virtual Page Table is
used. Use this macro in a few places where this was done by-hand.
Make vtophys() use PMAP_KERNEL_PTE(). In non-DEBUG cases, this is
a fair bit faster.
1998-03-27 19:18:04 +00:00
e3e82a2bd2
Move bus_space implementation to bus_space.c.
1998-03-27 18:11:31 +00:00
a1c2154bd6
Add (commented out) ALTXBUTTONS option.
1998-03-27 06:12:32 +00:00
57191652f3
Don't map Opt-{1,2,3} to mouse buttons unless the ALTXBUTTONS option is
...
specified. (Doing so breaks German keyboards!) Fixes PR 4929.
1998-03-27 06:10:54 +00:00
b3d285e625
add -nostdinc to CPPFLAGS, so that /usr/include won't be used
1998-03-27 01:32:53 +00:00
2ce8cda3e5
Get rid of a /* in a comment.
1998-03-27 01:17:18 +00:00
b1e15c2005
Add some robustness to pmap_alloc_physpage(): Instead of panic'ing if
...
we can't get a page, find an inactive pmap and pmap_collect() it,
freeing up a few pages. Go ahead and die if we can't allocate a page
after 5 tries.
1998-03-27 00:52:43 +00:00
2467110095
Change commented out default baudrate(38400 to 9600) of serial console.
1998-03-27 00:11:07 +00:00
94a783a350
allow use of new wscons code.
1998-03-27 00:07:53 +00:00
f9133e686e
Change default console. pc -> wscons
1998-03-26 23:51:08 +00:00
6143f6a20e
Allow to use the new VGA and keyboard controller drivers as console
1998-03-26 23:45:59 +00:00
a46fb646ee
add entries for the new wscons stuff
1998-03-26 23:43:43 +00:00
a81efa33bc
tell drivers that this port knows about the new wscons code
...
(and generates the NWSCONS etc include files)
1998-03-26 23:42:53 +00:00
3334a0d040
Add bus_space_copy_region_N().
1998-03-26 23:41:51 +00:00
b86884a71a
Give pmap_collect() some substance: when called, a process is being
...
swapped out, so remove all of the physical mappings the process has
in order to free up the page table pages.
Since the pmap module is allowed to "forget" mappings, pmap_collect()
may be called in other situations where the memory situation is desperate,
although it's more likely that the pages will simply be needed again the
next time a process runs.
1998-03-26 22:18:36 +00:00
653457f11b
Remove the variable oldtm from diagnostic printf() statement as this
...
variable no longer exists.
1998-03-26 21:27:12 +00:00
35dc347724
Bring this more up to date.
1998-03-26 20:43:02 +00:00
8003976152
The ehbug option is dead now the etherH driver has been replaced with
...
an NE2000 attachment.
1998-03-26 20:42:34 +00:00
cd0f9898b5
Fix problems with microsecond timestamping in microtime().
...
Remove some old dead code.
1998-03-26 20:07:18 +00:00
26634e5f83
Cleaned up the IOMD access macros.
1998-03-26 20:05:49 +00:00
6fa49296d7
Include machine/asm.h. Removed un-necessary .req directives. Use the
...
ENTRY() macro for declaring function entry points.
1998-03-26 20:05:13 +00:00
c6b5400405
Add a couple of missing brackets in the arm_byte_to_page and
...
arm_page_to_byte macros.
1998-03-26 19:57:13 +00:00
47ec7dab23
This file is no longer included by anything and is out of date. All
...
podule definitions can be found in the podulebus subdirectory.
1998-03-26 19:55:53 +00:00
5f8c3edfed
add pmap_dump as a DEBUG function
1998-03-26 19:49:51 +00:00
531db9e0d3
Sanity check the virtual addresses in the kernel and non-kernel cases
...
of pmap_enter() (and pmap_kenter_*()). Remove diagnostic check for
kernel pmap in pmap_alloc_asn().
1998-03-26 19:06:28 +00:00
040f7cbc70
Remove references to pmap.old.h - It should have just been pmap.h, but
...
that isn't necessary, either, since <vm/vm.h> is already included.
1998-03-26 18:17:13 +00:00
f3d6050987
Typo in initial interrupt register mapping code.
1998-03-26 16:11:40 +00:00
3ff4af3e9e
Add MIPS_INT_MASK_FPU definition and remove unnecessary code.
1998-03-26 13:15:01 +00:00
6b2d0fa8a0
* Create /sys/arch/mips/include/intr.h, with extern declaration of
...
interrupt-callout vector from mips locore dispatch code to port code.
* Move branch-emulation declaration to mips/include/trap.h.
* Garbage-collect pmax/pmax/trap.h.
Not needed now pmax/pmax_trap.c is gone, and after above tidy-up.
1998-03-26 12:46:33 +00:00
01be9f533f
Add extern declaration of old "systype" global variable holding model type,
...
until all pmax code uses platform support.
1998-03-26 11:44:28 +00:00
4d3f17a9f7
Garbage-collect oldstyle model-select options from GENERIC.
1998-03-26 11:35:42 +00:00
9376fa1a1b
Commit MIPS_INT_MASK_FPU change: use MD symbol to check for pending FPU
...
interrupts.
1998-03-26 09:21:05 +00:00
dd3d062237
Delete a couple of gratuitous printfs.
1998-03-26 06:36:36 +00:00
8a86fd47be
It's Just Wrong to configure a KN02 system slot as an IOCTL ASIC, but
...
since it's currently done that way, nuke the gratuitous printf that
reports the behavior.
1998-03-26 06:35:27 +00:00
38d5126caf
Set cpu_model in the dec_foo_init() functions, make them consistent and
...
descriptive, and print the model before reporting physical memory size.
1998-03-26 06:32:37 +00:00
b6fca1a9c8
The line between "family" and "model" are ... very fuzzy on the DECstation.
...
So, don't bother.
1998-03-26 06:27:57 +00:00
5fa1b5f440
Add Performa 580/588 to the list of machines which have a Cuda chip.
...
XXX - we should really be using machine ID symbolic constants here, not
numbers.
1998-03-26 06:25:49 +00:00
d654444e88
Right now all platforms use the tc_slot_info[] stuff, so put it in a place
...
where everyone can get at it.
1998-03-26 03:12:05 +00:00
c4ba627afc
Kernel config file for bishop.nas.nasa.gov and ripley.nas.nasa.gov,
...
AlphaStation 500 and AlphaStation 600, respectively.
1998-03-26 03:00:36 +00:00
9234f2450b
Enable DDB history, netbsd.gdb.
1998-03-26 02:58:48 +00:00
6111783e61
if NEW_SCC_DRIVER, 3000/300 and 3000/500 aren't PROM console candidates.
1998-03-26 02:53:21 +00:00
a9e071bef5
defopt NEW_SCC_DRIVER
1998-03-26 02:52:43 +00:00
1282aca230
Add options UVM, PMAP_NEW, and NEW_SCC_DRIVER.
1998-03-26 02:51:46 +00:00
73f1a02583
If NEW_SCC_DRIVER is defined, the 3000/300 and 3000/500 are not
...
PROM console candidates.
1998-03-26 02:45:34 +00:00
7b4da708cc
Add support for attaching a zstty as the console, conditional on
...
NEW_SCC_DRIVER.
1998-03-26 02:43:22 +00:00
4a4bccc923
Remove references to NEW_PMAP.
1998-03-26 02:21:46 +00:00
76ba34c797
Remove references to "new_pmap".
1998-03-26 02:19:02 +00:00
456b3df281
Remove the Mach 3 pmap from the tree, replacing it with the contents of
...
pmap.old.<whatever>. To see the history, look at the corresponding
pmap.old.<whatever> file.
1998-03-26 02:18:03 +00:00
17513c206c
make this compile
1998-03-26 01:09:04 +00:00
60e832dc24
Make this compile.
1998-03-26 01:01:13 +00:00
f658122053
Check for a valid PROM virtual address.
1998-03-25 23:15:07 +00:00
3ac5a77c70
Make pmap_kremove() deal with mappings entered with pmap_enter() as well.
...
Prevents stale PV entries from lingering around. Fixes a nagging
"kernel stack not valid halt" I was seeing with PMAP_NEW.
Idea from Chuck Cranor.
1998-03-25 22:52:28 +00:00
1c1186a3f2
the kernel remove function can encounter mappings that are on the
...
pvlists if they were entered by the fault routine. in this case
we had better call pmap_remove to clear out the pventry structures.
appears to fix some pvlist releated panics people have seen with pmap.new.
1998-03-25 22:49:11 +00:00
6c7f702633
- remove one level of soft interupt in the software autorepeat code
...
- WOPEN -> wopen
1998-03-25 22:14:13 +00:00
db6aafad0b
With new pmap stuff, the need for MSS3 goes away.
1998-03-25 18:33:41 +00:00
a30817ebaa
if installing page 2 as a PT page for first 4M (for BIOSCALL),
...
make sure we zero it first so that the PT is not filled
with random garbage
1998-03-25 16:30:43 +00:00
e32073cbb1
Sync with latest tty changes.
1998-03-25 09:46:09 +00:00
b40a3c98f5
Use an MD name for the FPU-interrupt mask, as in PR # 4399.
...
mips-based Sony news wire the FPU to hard-interrupt 3, rather than 5
as recommended in Kane.
1998-03-25 08:35:39 +00:00
5456233e69
Garbage-collect old warnings.
...
Cvs: ----------------------------------------------------------------------
1998-03-25 07:43:12 +00:00
5aa93520b5
Pause after failing to find the same driver as the PROM.
1998-03-25 07:35:05 +00:00
a47a813037
Reinstate workaround for old PROM (3100) return values.
1998-03-25 07:30:28 +00:00
5dbbcd7d4d
Garbage-collect BRAINDAMAGEd code (see pr 4438).
...
Attachment of keyboards and mice needs more work.
1998-03-25 06:27:32 +00:00
383ff0cb59
* Use new defopt model-specific options and opt files.
...
Replace all DS5000_* and DS3100 ifdefs with ifdefs on DEC_ options.
* Use MI declarations, not pmax-specific, in model-specific init
that uses baseboard (ioasic) registers.
* Further cleanup of machdep.c. Clock-tick still needs more thought.
* Use 'ibus' names for 3100 baseboard devices in MI code.
1998-03-25 06:22:19 +00:00
ee65226ab6
Declarations for shared 3min/maxine memory handler.
1998-03-25 06:04:31 +00:00
dace384659
Update config files after splitting model support.
1998-03-25 04:17:08 +00:00
mycroft