Commit Graph

8355 Commits

Author SHA1 Message Date
thorpej 8cb7deb85b Add support for the DEC DE422 Ethernet, which is a DEPCA
attached to the EISA bus.  This board is commonly found
on Alpha Jensen systems.
2000-08-11 02:27:07 +00:00
thorpej d561771013 Add missing copyright noticed (it ended up in eisareg.h by mistake). 2000-08-11 00:46:17 +00:00
thorpej 5310aa68b8 Oops, back out previous. It wasn't intended. 2000-08-11 00:44:37 +00:00
thorpej e207174eb0 Add functions to read EISA configuration data for MEM, IRQ, DMA, and IO.
XXX Just error stubs on the i386 right now -- someone needs to write
XXX EISA BIOS code for i386.
2000-08-11 00:43:18 +00:00
thorpej 30f7d691a0 Declare the ECU data in an MI location, so that drivers can
use it.
2000-08-10 23:30:08 +00:00
ad 19fd9da968 Define SIOC[SG]IFGENERIC in <sys/sockio.h>, as FreeBSD and OpenBSD do. 2000-08-10 11:48:41 +00:00
soren 363910c22b s/Toshiba America Info Systems/Toshiba/ since they are the main PCI issuer.
Add new version of the Oboe FIR device.
2000-08-10 01:55:57 +00:00
drochner a1b037bc3a recognize the i440MX mobile chipset's IDE interface 2000-08-09 13:23:07 +00:00
tv 389bf995b5 %b -> bitmask_snprintf() 2000-08-09 01:56:33 +00:00
mjacob 0dc8c1fb35 Remove ispcmd_slow routine- SCBUSACCEL routine will set/clear tag/wide/sync.
Make some changes about where some things sit in the softc.
2000-08-08 22:58:30 +00:00
mjacob 9766fcf2be Don't attempt to actually read SAF-TE temperature objects- nobody seems
to be obeying the original spec as to what the numeric value means.

Temperature flags are unaffected- these are still the 'pseudo-thermometers'
and overtemp/undertemp warnings will be caught and translated to SES objects
here.
2000-08-08 22:55:30 +00:00
mjacob 295864adef During probe, use SCBUSACCEL ioctl to adapters that support it to
enable fast/wide/tagged.
2000-08-08 22:46:03 +00:00
bjh21 4f33d5a8ab Register definitions for the C&T 82C710, 82C711 and 82C721, as used in
the Acorn A5000, A4, A4000, A3010 and A3020.
2000-08-08 22:14:53 +00:00
tv 91537bce4a sizeof(fmtstring) + 8 wasn't enough for the string; that won't cope with the
printed version.  Make a little more room for the bitmask_snprintf() call.
2000-08-08 19:59:41 +00:00
tv 2b3a50d3de %b -> bitmask_snprintf()
Because this code is shared, add a macro for bitmask_snprintf() that
should expand to the equivalent snprintf() on non-NetBSD systems.  This is
only used in ?HCI_DEBUG cases anyway.
2000-08-08 19:51:46 +00:00
tv 87ab5c42c5 %b -> bitmask_snprintf() 2000-08-08 19:42:40 +00:00
jeffs aaa5c58d70 Update arc map routine prototype to compile again. 2000-08-08 02:11:05 +00:00
drochner 78fa2d7e41 fix interrupt priority botch 2000-08-07 17:34:41 +00:00
billc aac52686f0 Manually edit the headers to show which version of pcidevs this was
generated from.

XXX - this really should be automated
2000-08-07 08:27:11 +00:00
billc 7ba2890ab8 Added PCI IDs for 3Com's Home Connect (3c450) and Office Connect (3cSOHO100).
They both are register compat with later versions of the 3c905 (tornado/
vortex) series.
2000-08-07 04:08:35 +00:00
briggs b103a8ca48 Label the buffer size as such on probe. 128 KB makes sense, but 4608 does not. 2000-08-06 00:19:04 +00:00
ad 8d37a29277 Regen. 2000-08-04 14:32:05 +00:00
ad fc2908cf8a Vortex Computer Systems changes, from OpenBSD:
- Add product ID for GDT6518RS.
- Fix bogus product IDs.
2000-08-04 14:31:40 +00:00
augustss daff45a51a Regen. 2000-08-04 11:57:59 +00:00
augustss c54b0fde7a Add ATEN serial adapter. 2000-08-04 11:57:34 +00:00
tsutsui ef86d29308 Add one more delay() to sip_read_eeprom(). 2000-08-04 09:30:56 +00:00
bouyer 8464bde7e8 If the SET_FEATURE for piomode is rejected, fallback to mode 0 instead of
reporting an error.
This fixes the "piomode error (0x4)" problem with some ATAPI ZIP drives
reported on port-i386.
2000-08-03 23:14:31 +00:00
nathanw fb20241fda When performing pci_config_dump:
- Display the full value of 64-bit BARs.
 - Avoid displaying the upper 32 bits of 64-bit BARs as a separate 32-bit BAR.
2000-08-03 19:58:55 +00:00
bouyer 1b00421876 Add quirk entry for NEDICOM CRD-BP2, from kern/10738. 2000-08-03 12:36:08 +00:00
bouyer a8421d4787 Some W83781 have ID 0x11 instead of 0x10; handle these too.
Restore printing sdata for each sensors if DEBUG.
2000-08-03 09:27:01 +00:00
castor b6dd28b4ce Support some differences in the Macronix 98715AEC-C and E chips from the other
98715* series.

The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.

Also, start integrating fixes where media changes on an adapter
under load may fail.  There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
2000-08-03 03:07:30 +00:00
mjacob cb4d63d57c More compilation breakage in the non-DEBUG case
(from Castor Fu <castor@geocast.com>)
2000-08-03 03:00:04 +00:00
jeffs e97c2066ab Add options DDB_BREAK_CHAR. This overrides break on the serial console
break character with the supplied one.  This is useful for cases where
break is hard to generate, or you are connected to a PC that "sends"
breaks when power cycled.  For this mode in com, interpret break char
in the polling section, which allows entry into the debugger before
the tty is opened.  Only supported in the com driver currently.
2000-08-03 00:30:47 +00:00
bouyer de378db998 W83781D: Explicitely reselect bank0 before using "value RAM" registers.
Hopefully this will make the W83781D works.
Also use common functions to set up fan & temp info[] & sensors[] for
the W83781D.
2000-08-02 22:20:41 +00:00
bouyer e445e43ddc Add support for the W83697HF - basically a W83627HF with only 2 temp sensors. 2000-08-02 21:50:37 +00:00
bouyer 46c3f0204d PCIIDE_CMD0646U_UDMA->PCIIDE_CMD0646U_ENABLEUDMA for consistency with
PCIIDE_AMD756_ENABLEDMA
defopt PCIIDE_CMD0646U_ENABLEUDMA, PCIIDE_AMD756_ENABLEDMA,
    PCIIDE_CMD064x_DISABLE
Fix a typo pointed out by John Hawkinson
2000-08-02 21:49:09 +00:00
bouyer bd0766459c Add support for the CMD PCI646U. Linux claims that this driver is brocken
with UDMA, so enable Ultra-DMA only if "options PCIIDE_CMD0646U_UDMA" is set.
2000-08-02 20:23:45 +00:00
mjacob 1ae072f471 Fix bonehead bug for compiles w/o DEBUG set
(thanks to KANETA Shin'ichi <kaneta@cr.chiba-u.ac.jp>)
2000-08-02 17:39:50 +00:00
mjacob 068c76fc80 Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
2000-08-01 23:55:09 +00:00
bouyer 76c77aca38 Add support for the CMD PCI0646U2, an Ultra/33 version of the 0646.
Note: there's also a PCI0646U, for which I don't have docs for now.
2000-08-01 21:02:55 +00:00
briggs 02e3c1ef40 Use bus_space_read/write_multi_stream_2 for FIFO instead of bsr/w_multi_2. 2000-07-31 22:48:49 +00:00
gmcgarry f21a75dee3 XIDEBUG_CONFIG -> XID_CONFIG. From R.Massar@Fh-Worms.DE 2000-07-31 21:49:47 +00:00
ad 067f5e9814 Previous would have misbehaved if polled commands overlapped. 2000-07-31 13:16:34 +00:00
enami 35913a898c Sync internal state and ifmedia state. Addresses PR#10424. 2000-07-31 03:25:11 +00:00
briggs 3628f3e00c Make sure that we do not call bus_space_*_multi_* with zero count. 2000-07-31 02:14:47 +00:00
bouyer 100a4a6b22 Add support for the W83781D and W83782D hardware monitors. 2000-07-30 22:23:53 +00:00
briggs e6dde2bd42 Add MII support to smc91cxx driver. This is supported for the 91c100
and 91c100FD (FEAST) controllers.  Existing controllers should continue
to work as they have.  Added the card's memory to the probe message.
2000-07-30 21:34:47 +00:00
bouyer 538126d75a swap lm_match() and wb_match(), as wb_match() is more restrictive.
Otherwise a winbond can be mis-probed as a lm if it has the rigth device ID.
Problem reported by Bernd Ernesti.
2000-07-30 17:22:26 +00:00
takemura b5e3ec56a8 Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.) 2000-07-30 04:41:15 +00:00
jhawk d569dc2fb5 Whitespace fix (space rather than tab after #ifdef) 2000-07-29 17:49:08 +00:00