845cc26789
Add iso-image-md-pre and iso-image-md-post targets. Installation media can
...
now be built with the iso-image target from ${NETBSDSRCDIR}/etc.
2003-11-15 08:58:27 +00:00
67702193cc
explicitly pass MACHINE and MACHINE_ARCH to MAKEDEV.awk via environment,
...
so that this works as expected when not invoked via build.sh
2003-11-15 08:50:26 +00:00
96dd3017c1
Adapt to new config file naming convention.
2003-11-13 02:33:39 +00:00
eb0fcf4886
Add html4/hpcsh.
2003-11-05 08:22:16 +00:00
212800e523
/usr/share/man/{cat,man}4/hpcsh
2003-11-05 02:53:38 +00:00
07a0e27c44
Revert the change in default value of ipv6_v6only. Further discussion
...
on this topic is required. It should be reintroduced and pursued in
the IETF.
2003-11-03 15:12:06 +00:00
6f4bc2c877
Announce a reason for the shutdown.
2003-11-01 23:04:54 +00:00
4318508981
'rd' under 'all' should be 'rd2', so make it so.
2003-11-01 19:02:54 +00:00
d6fa98c3f0
getttyent(3) was changed to complain about unknown words at the end of
...
tty definitions. Use '#' to separate comments.
2003-10-30 20:40:20 +00:00
adfa67a197
Oops, fix comments.
2003-10-30 17:42:23 +00:00
87c704cac0
Add dummy scripts for these events.
2003-10-30 17:34:45 +00:00
1455475ac4
Use logger(1) to log errors -- otherwise the output goes nowhere.
2003-10-30 17:32:45 +00:00
9f320f289d
Dig man4 for sparc64.
2003-10-30 08:16:41 +00:00
8098923219
Make the ntp.conf parsing more specific, and therefore more robust. Closes
...
PR bin/23305.
2003-10-29 19:00:14 +00:00
0ff71b5cba
the arm ports are 'arm' and 'armeb'
...
pointed out by Shoichi Miyake
2003-10-28 11:34:14 +00:00
5a770ba2d8
Toggle the default value of ip6_v6only. Also provide a sample sysctl to
...
retain the existing behavior.
2003-10-28 06:31:28 +00:00
7833f0afc9
now that MAKEDEV is generate, install it from ${.OBJDIR}
2003-10-26 23:34:29 +00:00
3d29fcd1f7
Fix previous:
...
* Restore previous functionality which supported running postinstall
with an extracted etc.tgz set as the "source" directory (i.e,
/usr/src isn't available). We do this by generating the MAKEDEV
to ${SCRATCHDIR} if the real source is available, and leverage off
the compare_dir() code that the rest of postinstall uses to support
this functionality.
* Don't special case MACHINE_ARCH==arm; the MAKEDEV.awk should
be doing that since etc/Makefile doesn't have similar special
case code. In any case, AFAICT the only MACHINE_ARCHs are
"arm" and "armeb"; there is no "armel" in NetBSD.
2003-10-26 23:08:29 +00:00
ef31c1b29a
update for unified, dynamically generated MAKEDEV - change 'makedev' item
...
to generate the MAKEDEV to scratch dir and compare that with the currently
installed /dev/MAKEDEV; also add -a MACHINE_ARCH option to explicitly
set machine architecture for non-native builds
problem with postinstall pointed out by Patrick Welche and Hubert Feyrer
in private e-mails
2003-10-26 21:57:11 +00:00
fd9cf65324
g/c the 'see foo(X)' xrefs; this info is automatically generated
...
into MAKEDEV(8)
2003-10-26 21:21:50 +00:00
b1210ba8ee
style nits - use / re / instead of "re" for constant REs
2003-10-26 13:40:46 +00:00
706fa97ddd
As a temporary workaround, use "ln -sf" to be compatible with the
...
checks in distrib/common/makedev2spec.awk, which insists on "-sf"
usage (which is arbuably a bug, and should be looked at more closely).
2003-10-26 12:42:55 +00:00
f85d2d1c14
Use ${HOST_SH} instead of `sh'.
...
If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.
2003-10-26 07:25:33 +00:00
b9e3ec284d
Add the -T etc_pkg arg back to the MAKEDEV install.
2003-10-25 03:55:26 +00:00
3b77895e3d
adjust the device descriptions for better MAKEDEV(8) manpage output
...
note PF is not in tree (for the manpage)
2003-10-24 23:39:42 +00:00
ebbe98fcaf
Now that MAKEDEV is generated, just do an ordinary ${INSTALL_FILE} instead
...
of going back to the source dir (and losing) with ${ETC_INSTALL_FILE}
2003-10-24 22:39:51 +00:00
1b00681156
switch over to unified MAKEDEV
2003-10-24 20:12:04 +00:00
dd2276a2ee
make friendlier to objdir builds; now expect the caller to set ETCDIR
...
to the directory with src/etc; top of kernel sources is assumed
to be ETCDIR/../sys
fix error message for case when platform MAKEDEV.conf is not found
2003-10-24 19:57:36 +00:00
930959c6c0
fix floppy & ramdisk targets
2003-10-24 11:05:23 +00:00
9e9c552bb7
g/c SCSI-related entries
2003-10-24 10:26:44 +00:00
b2607ae4cb
make 'sd' optional
2003-10-24 10:25:08 +00:00
6108862993
fix pasto in pty target
2003-10-24 08:41:11 +00:00
3b5469b94c
fix various mistakes, such as using hardcoded majors or typos/pastos
...
add some more necessary device entries
introduce makedisk_minimal() and use it to create the CD-ROM & md entries;
this procedure only creates 'a' and RAW_PART device entries
remove pf from 'all' target - it's not part of tree, so shouldn't be
created by default
2003-10-24 08:29:57 +00:00
53d9446257
fix handling of ARM ports' majors file
...
fix handling of sbmips majors - it uses the evbmips majors
fetch information about platform RAW_PART, and make it available
to MAKEDEV.tmpl
2003-10-24 08:27:26 +00:00
1eeb241e42
sync with reality, put back some entries mistakely omitted
...
in the initial conversion from MD MAKEDEV
2003-10-24 08:20:26 +00:00
72bc77e103
No INSTALL kernel for ofppc.
2003-10-24 05:01:39 +00:00
7234f6fb3c
don't put GENERIC into BUILD_KERNELS
2003-10-22 20:40:42 +00:00
a9b5015c6d
fix bug in pty target (pasto from some other port)
2003-10-22 20:22:26 +00:00
c5808c177b
no dmoverio either
2003-10-22 17:13:50 +00:00
bc7edb6f2d
add stic0 to 'all' (used to be created in alpha 'wscons' target)
2003-10-22 17:09:50 +00:00
0f5caa8622
no apm
2003-10-22 17:08:50 +00:00
ed841056c7
no USB/openfirm on acorn32, remove from lists
...
put back some stuff which was in the original MAKEDEV lists
2003-10-20 17:56:35 +00:00
4c5a46429b
use tty0 instead of com0
2003-10-20 16:42:13 +00:00
520acde2ae
com0/com1 is exactly tty00/tty01, so g/c them from the list
2003-10-20 16:41:39 +00:00
836389dfbc
Supply the usual default setting of $commmand. Omission pointed out by
...
Launey Thomas in private mail.
2003-10-20 16:09:15 +00:00
b5aee30a01
set fsck_flags=-p in /etc/defaults/rc.conf instead of checking if it is
...
empty in /etc/rc.d/fsck. From Bernd Ernesti.
2003-10-20 15:02:15 +00:00
fbdef6175b
remove entry for clockctl; that is created in the MI 'all' target
2003-10-19 19:08:59 +00:00
7a46124ea4
determine the platform number of disk partitions by looking
...
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
2003-10-19 19:07:26 +00:00
cf58aa2b57
remove copyright notice accidentaly carried over from the hp300
...
MAKEDEV script
2003-10-19 18:50:35 +00:00
c852a48a4f
g/c audio0-3 (created by target 'audio')
...
g/c wscons-related devices (all created by target 'wscons')
2003-10-19 17:32:13 +00:00
sekiya