356d681927
Add ukactivate&ukdetach so uk devices can be detached.
2000-03-29 18:11:44 +00:00
c693409acb
Nuke register declarations.
2000-03-29 13:57:51 +00:00
ac8fa9c43d
Remove "register" declaration.
2000-03-29 13:09:02 +00:00
627a9ec886
Spelling error.
2000-03-29 12:02:01 +00:00
365daa37be
Remove redundant decl of cold - it's in <sys/kernel.h>.
2000-03-29 03:59:43 +00:00
8a447f3757
Remove reduncdant decl of wdc_kill_pending - it's in <dev/ic/wdcvar.h>.
2000-03-29 03:56:53 +00:00
9ff7681a33
Don't need to include <sys/conf.h> here.
2000-03-29 03:43:31 +00:00
bfb011b813
Remove duplicate ncr53c9x_dmaselect declaration.
2000-03-29 03:03:28 +00:00
023c506a5e
Take off an item.
2000-03-29 02:17:42 +00:00
61db1b8e46
*SIGH* Revert back to the old method of aborting xfers.
...
I had tested the new stuff for two months now, but as soon as I commited
it the problems started to appear. Murphy, no doubt...
2000-03-29 01:49:13 +00:00
9a386a047a
Do not use all xfers at the same time, this can cause problems in the HC
...
drivers.
2000-03-29 01:47:25 +00:00
7e7ceecd2b
A first stab at support for isochronous transfers.
2000-03-29 01:46:26 +00:00
5e754a177b
Do not accept new xfers for queuing while a pipe is aborting.
2000-03-29 01:45:20 +00:00
fc39329153
Change a printf() to a panic() since the kernel is going to die on the next
...
line anyway.
2000-03-28 17:24:46 +00:00
f606c26834
Be more defensive in a DIAGNOSTIC test.
2000-03-28 17:07:04 +00:00
37e4821c88
The list is growing...
2000-03-28 10:54:35 +00:00
c2f90d0d43
Correct a debug message.
2000-03-28 10:53:59 +00:00
9609f4caa2
Add a comment.
2000-03-28 09:48:25 +00:00
3316da3988
Another patch for xfer abort...
...
XXX The current xfer queueing and aborting semantics should really
XXX be changed. It cannot be implemented in a sane way on UHCI.
XXX One day when I have lots of time I'll redesign it...
2000-03-28 09:47:10 +00:00
28a87e2fdb
Use default timeout for transfers.
2000-03-27 22:44:01 +00:00
568b4d8190
Be a little more careful when aborting.
...
Preallocate some TDs for large buffers.
2000-03-27 22:42:57 +00:00
8456fa4709
Add a flag for umass debugging.
2000-03-27 22:40:48 +00:00
ba9bb9dcd5
Cosmetical nit in previous.
2000-03-27 17:00:50 +00:00
2030c2a75a
Regen.
2000-03-27 16:56:27 +00:00
9bdb74bc42
Add a couple of DPT devices.
2000-03-27 16:55:43 +00:00
6daecf7901
Fix multicast filter to set IFF_ALLMULTI flag properly. Also clear
...
unused group address from filter.
2000-03-27 12:58:01 +00:00
720e17c11e
Do not try to lock out MAC until the firmware correctly start up, to avoid
...
"awi: failed to lock interrupt" message when IRQ are shared with other
devices [PR kern/9660]
2000-03-27 12:54:59 +00:00
ab9d324f37
backout changes between 1.10 and 1.12 to re-enable awictl stuff.
...
Actually, it is partially duplicated with SIOC[GS]IFMEDIA and
SIOC[GS]80211NWID ioctls currently supported. But I'd like to leave it
until configuration interface for common 802.11 stuff will be cleaned up.
2000-03-27 12:52:45 +00:00
fc72e72d7d
Change (almost) all static to Static. The symbol `Static' can then be defined
...
to `' or `static' depending on if you want to debug or not.
2000-03-27 12:33:53 +00:00
439812ba3b
In attach message, spell it "target" not "targ", as in the locator.
2000-03-27 11:45:42 +00:00
c522067861
Maintain IFF_ALLMULTI flag by ourself.
2000-03-27 11:03:47 +00:00
2341e5679e
Don't mess with QH in bulk abort for the moment.
2000-03-27 09:41:36 +00:00
8e7f7d2d69
Keep free block statistics.
2000-03-27 08:27:03 +00:00
9e5b3b729c
Remove some debug nonsense.
2000-03-27 08:01:09 +00:00
9ffe849791
Make it compile without DIAGNOSTIC.
2000-03-27 07:39:48 +00:00
8d29747e3b
When we fall into allmulti case due to too may multicast address,
...
properly set the type and length in struct wi_ltv_mcast.
2000-03-27 07:04:21 +00:00
19e7b1b8ae
No need to call wi_setmulti() if ether_{add,del}multi returns 0.
2000-03-27 06:48:05 +00:00
d0c76be757
cleanup function prototypes.
2000-03-27 03:25:17 +00:00
b97e06092d
Shuffle some prototypes to a more appropriate location.
2000-03-27 03:01:33 +00:00
2ee63332b3
Add bits for eventual support of deleteing components and moving
...
hot-spares into the main set.
2000-03-26 22:38:28 +00:00
a52e96b1eb
Fix typo. Found by Aaron Campbell <aaron@cs.dal.ca>.
2000-03-26 21:42:54 +00:00
230876cf26
Merge parts of chs-ubc2 into the trunk:
...
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
2000-03-26 20:42:21 +00:00
8abfe24915
Cast timeval members to types we know the printf conversions of.
2000-03-26 20:24:12 +00:00
a9643a2075
Regen & adjust name.
2000-03-26 15:08:43 +00:00
59310c8294
Adjust the name of the Kawasaki Ethernet adapter.
2000-03-26 15:08:02 +00:00
30819cb81c
Bus_dma'ify the KDB50 driver, and make it work.
2000-03-26 11:45:04 +00:00
fc55ca0933
Allow 16 fragments for MSCP DMA.
2000-03-26 11:37:55 +00:00
7b737d77b3
For Cobalt Networks 21143's, always use store-and-forward and toggle
...
a GPIO line to fully reset the PHY.
2000-03-26 10:53:39 +00:00
240cf24ebd
regen (sorry forgot to do separate commit for them)
2000-03-26 10:31:19 +00:00
74846d31f5
add CIS for Corega Wireless LAN PCC-11 (no driver support yet)
2000-03-26 10:24:51 +00:00
augustss