4371d91433
Have MI ncr53c9x_attach() the 2nd and 3rd arguments for scsipi_adater
...
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
2000-06-05 07:59:50 +00:00
bfb011b813
Remove duplicate ncr53c9x_dmaselect declaration.
2000-03-29 03:03:28 +00:00
b8e1812629
For the ESP406/FAS408, add sc_cfg4 and sc_cfg5.
...
Add a detach routine, and do the addref/delref.
2000-03-19 21:25:49 +00:00
744ccf496c
Expose ncr53c9x_init().
2000-03-18 22:18:57 +00:00
c0b35f72c2
Adjust ncr53c9x_intr() prototype.
2000-03-18 22:09:32 +00:00
ddd5fcbf66
Remove tinfo_t symbols which result in never used global common variables.
2000-01-07 08:12:15 +00:00
636de81487
Define config register 3 values for NCR53C9x/FAS216.
...
Add sc_cfg3_fscsi to the softc and use it to set the chip into Fast SCSI
mode for the chips that use it.
1999-09-22 03:31:23 +00:00
71c86e3e92
Changes to NCR53c9x driver necessary to add support for the AMD Am53c974
...
PCscsi-PCI SCSI controller. From Izumi Tsutsui, PR #6654 .
1999-01-06 19:19:38 +00:00
5f0577babc
Adapt to the new scsipi_adapter interface.
1998-11-19 21:43:00 +00:00
380e88d4f0
Adjust some comments.
1998-09-01 22:56:00 +00:00
6693724a83
Changed inaccurate comment on the sc_freq member of the driver's softc
...
structure. The frequency is represented in MHz rather than Hz. [PR/6805]
1998-09-01 22:22:03 +00:00
5442fd5420
If we have an NCR53CF9x (indicated by the front-end by setting a flag
...
in the softc's new "features" word), set FSCSI bit in CFG3 if the sync
period is <= 200ns, or clear it otherwise.
1998-05-26 23:17:34 +00:00
0d3d41fa21
Allocate SCSI message buffers in ncr53c9x_attach(), with a provision
...
for front-ends to override the allocation to avoid alignment
handling in their DMA engines. Note that that ncr53c9x_msgout()
can request a 1 byte DMA transfer that would be difficult to break up.
1998-05-04 11:11:24 +00:00
616e0b7e33
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:26:38 +00:00
d2f48f6b3e
Add yet another chip variant: FAS216, used by the amiga Phase5 SCSI boards.
1997-10-04 03:59:00 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
09109c38a1
Maintain a copy of the configuration flags in our `softc'.
1997-07-30 11:48:32 +00:00
a4ae679706
Declare `ncr53c9x_dmaselect'.
1997-07-20 16:24:00 +00:00
31b943b8ac
Preliminary support for ESP406 and FAS408 variants (from Eric Hvodza; PR#3559)
1997-05-01 22:16:24 +00:00
94eaf1bb04
Implement target selection using DMA.
...
To allow a period of testing the variable `ncr53c9x_dmaselect' is used to
enable this feature (default is 0, i.e. the old behaviour).
1997-04-27 22:08:51 +00:00
50b0bafbbb
Allow separate control over the "per-target trace" feature
...
via the NCR53C9X_DEBUG value. Add some padding for m68k.
1997-04-01 22:08:18 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
2163898eeb
Add the 53c96 variant.
1997-02-27 13:59:32 +00:00
dd89d8fd78
Machine-independent NCR 53c9x SCSI driver, derived from the SPARC/Alpha
...
versions. Thanks to Chris Demetrious and Paul Krannenburg for the
initial work towards merging the two.
1997-02-27 01:12:07 +00:00
nisimura