but add a second argument to it to indicate whether the TLB/caches need to be
flushed. Default cortex to pmap_needs_fixup = 1. But check the MMFR3 field
to see if the fixed can be skipped.
Use a cf_flag bit 0 to indicate whether the A9 L2 cache should disable (bit 0 = 1)
or enabeld (bit = 0).
With these changes, the A9 MMU can use traverse caches to do MMU tablewalks
Also, make sure all memory has the shareable bit for the A9.
<arm32/machdep.h>
Move the extern for cpu_reset_address to the same file.
Add cpu_reset_address_paddr.
Kill cpu_reset_v4_MMU_disable.
if cpu_reset_address is NULL, then the MMU will be disabled.
as described in
http://mail-index.netbsd.org/tech-kern/2012/06/23/msg013442.html
PMP support in integrated to the atabus layer.
struct ata_channel's ch_drive[] is not dynamically allocated, and ch_ndrive
(renamed to ch_ndrives) closely reflects the size of the ch_drive[] array.
Add helper functions atabus_alloc_drives() and atabus_free_drives()
to manage ch_drive[]/ch_ndrives.
Add wdc_maxdrives to struct wdc_softc so that bus front-end can specify
how much drive they really support (master/slave or single).
ata_reset_drive() callback gains a uint32_t *sigp argument which,
when not NULL, will contain the signature of the device being reset.
While there, some cosmetic changes:
- added a drive_type enum to ata_drive_datas, and stop encoding the
probed drive type in drive_flags (we were out of drive flags anyway).
- rename DRIVE_ATAPIST to DRIVE_ATAPIDSCW to better reflect what this
really is
- remove ata_channel->ata_drives, it's redundant with the pointer in
ata_drive_datas
- factor out the interpretation of SATA signatures in sata_interpet_sig()
propagate these changes to the ATA HBA drivers, and add support for PMP
to ahcisata(4) and siisata(4).
Thanks to:
- Protocase (http://www.protocase.com/) which provided a system
with lots of controllers, SATA PMP and drive slots
- Conservation Genomics Laboratory, Department of Biology, New Mexico State
University for hosting the above system
- Brook Milligan, who set up remote access and has been very responsive
when SATA cable move was needed
1) Move core entropy-pool code and source/sink/sample management code
to sys/kern from sys/dev.
2) Remove use of NRND as test for presence of entropy-pool code throughout
source tree.
3) Remove use of RND_ENABLED in device drivers as microoptimization to
avoid expensive operations on disabled entropy sources; make the
rnd_add calls do this directly so all callers benefit.
4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
have lead to slight entropy overestimation for some sources.
5) Add new source types for environmental sensors, power sensors, VM
system events, and skew between clocks, with a sample implementation
for each.
ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files). Tested with release
builds on amd64 and evbarm and live testing on amd64.
- Replace most remaining uses of l_addr with uvm_lwp_getuarea() or lwp_getpcb().
- Amend assembly in ports where it accesses PCB via struct user.
- Rename L_ADDR to L_PCB in few places. Reduce sys/user.h inclusions.
<sys/systm.h> to the one file that did not already contain it.
This now means that physmem can be changed by updating systm.h and uvm_page.c
(excluding fixing printfs)
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.
changes elsewhere in the kernel:
* kernel_l1pt is now a global in pmap
* wdc no longer has dma/udma caps without the relevant options, however,
rside doesn't support dma/udma so don't set the options.
* also fix a device_t/softc split issue.
Perhaps I should add the kernel to the default build list for acorn32, to
avoid any other breakage. Although as the only person probably even
running NetBSD on an EB7500ATX system I'm not sure it's worthwhile.
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:
1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.
2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.
I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.
This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
Get rid of the static bus tag, instead move it into the softc.
Update to ThorpeJ's recent variable renaming for ATA things.
De-__P and KNF prototypes, also make attach and probe static.
Add RCSID.
Add a copyright for myself.
