Commit Graph

56 Commits

Author SHA1 Message Date
tsutsui
6aea963ed9 It seems the LAN Adapter on dreamcast actually uses slow 150ns SRAM,
so handle it properly by an additional quirk flag in sc_flags.

The problem was reported by Pat Wendorf on port-dreamcast, and
the fix was suggested and confirmed by Christian Groessler.
2003-02-05 12:03:54 +00:00
tsutsui
2837b28251 If the chip is in byte access mode for system bus, we should set
FE_D6_SBW_BYTE, not clearing FE_D6_SBW_WORD (which is zero).
Pointed out by Christian Groessler.
2002-12-24 13:10:26 +00:00
tsutsui
9604e7689d More cleanup of MI mb86960 driver:
- Add support for byte system bus mode. Based on patch in kern/17193 by
  Christian Groessler, with some improvements by me.
- Rename sc_flags in mb86960_softc to sc_stat, rename "type" to sc_flags
  to specify controller quirks and remove enum mb86960_type.
- Pass controller type via new sc_flags in mb86960_softc rather than
  via an mb86960_attach() arg.
- Handle unaligned mbufs properly in mb86960_write_mbufs(). (from ne2000.c)
- Fix a signed/unsigned comparision warning.
- Add definitions of status bits in the RX packed header.
- Change types of some members in mb86960_softc.
2002-11-30 14:15:10 +00:00
tsutsui
fdedb8dbd6 - Merge dev/ic/ate_subr.c into dev/ic/mb86960.c since it only has EEPROM
read function which can also be used for other MB86965 based boards.
- Rewrite EEPROM read function as per 93C06 EEPROM datasheet.
- Misc cleanup.
2002-10-04 15:22:27 +00:00
tsutsui
f84a0fccc0 Fix chip identification bit definitions in DLC7 register,
from Christian Groessler on port-dreamcast.
2002-09-29 17:10:37 +00:00
tsutsui
d73bf82699 Remove unused FE_VERSION and FE_REG_VERSION. 2002-09-28 17:22:49 +00:00
lukem
a4bae8b066 add/cleanup RCSID 2001-11-13 13:14:31 +00:00
wiz
456dff6cb8 Spell 'occurred' with two 'r's. 2001-09-16 16:34:23 +00:00
thorpej
150ca9d41a bcopy -> memcpy, strcpy 2001-07-07 15:59:37 +00:00
thorpej
c2c26e1362 bcmp -> memcmp 2001-07-07 05:35:39 +00:00
wiz
2a8c778f1b retrieve, not retreive 2001-06-12 14:59:27 +00:00
lukem
1d15673dae consistently use FE_DEBUG (DEBUG was used a couple of places where it
was obvious that FE_DEBUG should have been used instead)
2001-01-20 07:31:00 +00:00
thorpej
6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
thorpej
b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
thorpej
7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
tv
389bf995b5 %b -> bitmask_snprintf() 2000-08-09 01:56:33 +00:00
jhawk
1e59d99d28 For all network drivers that call ether_ifattach(), and also
have _detach() functions:
  Ensure that softc keeps state about whether the attach succeeded,
  and make the detach function return immediately if the attach did
  not complete.
2000-05-29 17:37:12 +00:00
thorpej
6e4b4f6954 Use ether_crc32_le(). 2000-05-12 16:45:42 +00:00
augustss
169ac5b3c1 Remove register declarations. 2000-03-30 12:41:09 +00:00
enami
a54d060a1c Unhook the entropy source on detach. 2000-02-02 10:45:12 +00:00
enami
a909d816d2 Add detach support. 2000-02-02 09:34:51 +00:00
itojun
65363da25e Merge in NetBSD/sh3 from cvs.kame.net repository.
Tree structure:
- sys/arch/sh3: sh3 generic code
	As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).
1999-09-13 10:30:21 +00:00
abs
b02dbae17e In xxx_mediachange(), if there is no callback to the front-end, just
return 0 instead of EINVAL.  In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is
setting to that type.
This matches changes Jason made a while back to sys/dev/ic/lance.c
1999-06-23 04:17:10 +00:00
thorpej
f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
thorpej
9caa955278 Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
ourselves.  Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
1999-03-25 23:19:16 +00:00
explorer
3ebb419571 Update to slightly altered rnd_attach_source() api 1999-02-28 17:08:05 +00:00
thorpej
69a4436f8b Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING. 1999-02-17 03:40:59 +00:00
pk
19f705b094 Cast bus_space_{read,write}_multi arguments. 1998-12-03 23:33:45 +00:00
thorpej
1d0f24882d Now that the *_activate() functions don't do things which are attachment
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
thorpej
dd6750820c Expose the "enable" and "disable" functions so that the front-ends can
access them.
1998-11-17 20:25:00 +00:00
jonathan
011f2bda08 defopt NS, NSIP. 1998-07-05 06:49:00 +00:00
jonathan
3751946b97 defopt INET, NETATALK. 1998-07-05 00:51:04 +00:00
mycroft
8f597a8744 Oops; make the table const. 1998-03-29 22:36:42 +00:00
mycroft
a6b8b01d96 Use a 4-bit table to speed up the CRC even further, without increasing the
code size too much.
1998-03-29 22:34:27 +00:00
mycroft
fe7f32954b Optimize the address CRC routines a bit. 1998-03-29 22:08:03 +00:00
enami
2b5f7351d2 Split Fujitsu MB9696x based ethernet card driver into bus
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
thorpej
06ce220790 Update for config changes. 1998-01-12 09:39:57 +00:00
perry
fff05a68ab RCSID Police. 1998-01-05 07:31:05 +00:00
explorer
f9370ddc7a Add and/or update rnd_*() hooks 1997-10-15 05:55:13 +00:00
is
07b064e02e New ARP system, supports IPv4 over any hardware link.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.

For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
thorpej
0211a3232d Appease the compiler: get rid of some unused variables, add some
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess.  Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
christos
86373f8cf9 backout kprintf changes 1996-10-13 01:37:04 +00:00
christos
58953408cb printf -> kprintf, sprintf -> ksprintf 1996-10-10 22:04:48 +00:00
mycroft
cec36bf8d5 Use intr.h. 1996-05-12 23:51:23 +00:00
thorpej
15354e899c Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit.  Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:55:13 +00:00
cgd
51e85d07b9 update for addition of a machine-dependent cookie as the first argument
to isa_intr_{,dis}establish().
1996-04-11 22:27:59 +00:00
mycroft
740637ad71 If we dequeue a packet due to excessive collisions, make sure we check
to see if the queue length has dropped to 0.
1996-04-08 19:02:19 +00:00
thorpej
6d9ea4cf59 New device attachment scheme:
- split softc size and match/attach out from cfdriver into
	  a new struct cfattach.

	- new "attach" directive for files.*.  May specify the name of
	  the cfattach structure, so that devices may be easily attached
	  to parents with different autoconfiguration semantics.
1996-03-17 00:43:52 +00:00
mycroft
3da4b2a160 The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
mycroft
e4413d1a10 Fix another comment. 1995-08-07 14:26:51 +00:00