Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
112,824 Commits 606 Branches 0 Tags 3.1 GiB
341c4563e3
Commit Graph

267 Commits

Author SHA1 Message Date
ragge
91b1808f8e Remove kvm_mkdb, it's not used anymore. 2003-05-11 18:17:30 +00:00
thorpej
f0150db8f2 Add an rc script for powerd(8). 2003-04-18 05:19:35 +00:00
is
f334171ccc Variable substitution happens at trap installation time, not at trap 
execution time - so it used to print "Using default configuration of
/etc/passwd".
 2003-04-03 11:25:10 +00:00
atatat
a7627e5f06 Reorganize/clarify the configuration checks (and subsequent messages) 
that might block startup, and be more permissive in general about
allowing the daemons to start.

Add some descriptive comments to the top of the smmsp script that
describe the purpose of the process.
 2003-04-02 18:00:13 +00:00
atatat
9dc7b7c964 Tweak postinstall to check for (and help out on) the upgrade to 
sendmail 8.12.8.  Some of the same machinery (in shorter form) is in
the additions to rc.d/sendmail.  Also, add a smmsp startup script for
the sendmail client queue runner.
 2003-03-24 15:19:27 +00:00
wiz
4f30393de2 Allow ccd autoconfiguration to be turned off (by setting ccd=NO in 
/etc/rc.conf; default is YES.)
Suggested by elric, ok'ed by lukem.
 2003-03-19 08:54:00 +00:00
wiz
4c74ff3fdd Allow cgd configuration to be skipped (by setting cgd=NO, defaults to YES). 
Closes my PR/20766.  Based on a suggestion by lukem.
 2003-03-19 06:06:47 +00:00
martin
047a69a2e5 Make it start before "SERVERS" and remove redundant dependency on 
"network". This brings it in line with the altqd script, which has
very similar requirements.
 2003-03-14 09:18:50 +00:00
lukem
f70738da04 move altqd slightly later in the boot sequence; as it's in /usr/sbin, 
it needs to depend upon mountcritremote, not run before NETWORKING ...
 2003-03-10 18:17:06 +00:00
jmmv
db97c4116c Use the pidfile created by wsmoused. 2003-03-04 22:32:11 +00:00
atatat
3065ba7178 Execute the actual command as it's set instead of calling the sh 
routine directly.  This allows one to to override a specific command
via the use of /etc/rc.conf.d/sysdb.
 2003-02-24 01:04:45 +00:00
grant
117844eb75 change behaviour of 'reload' to only reload the NAT rules and NOT flush 
the state table, making it much more useful.

The behaviour of 'restart' is unchanged (flush state table and reload
rules), but is now done slightly more elegantly.

ok'd by lukem.
 2003-02-16 22:18:46 +00:00
lukem
2c589141ff Implement start_cmd as: 
start_cmd="${name} "'${rc_arg}'
and stop_cmd & reload_cmd as:
	stop_cmd=$start_cmd
	reload_cmd=$start_cmd
(Just to be tricky)
 2003-01-31 06:47:16 +00:00
martti
405c73366e Back out previous (as discussed with releng). The correct way to set this is: 
# echo "myserver" > /var/yp/binding/`domainname`.ypservers
 2003-01-16 11:55:28 +00:00
martti
1e0411d0d5 Script to bind a NIS client to a known server. 
$ grep yp /etc/rc.conf
ypbind=YES
ypbind_flags="-ypset"
ypset=YES
ypset_flags="myserver"
 2003-01-16 07:37:33 +00:00
yamt
567c0a7e50 in comment, metion about src/distrib/sets/lists/etc/mi as well. 2003-01-10 05:07:45 +00:00
christos
99f6c8054f add staticroute 2003-01-09 15:58:23 +00:00
christos
e4cf375b81 Script to add and remove static routes: 
eg:
    $ cat /etc/route.conf
    # Turn on/off IP forwarding.
    +sysctl -w net.inet.ip.forwarding=1
    -sysctl -w net.inet.ip.forwarding=0
    net 192.168.2.0 -netmask 255.255.255.0 192.168.150.2
 2003-01-09 15:57:02 +00:00
christos
8d1054dc70 revert previous; luke and matt want this as a separate script. 2003-01-09 15:52:58 +00:00
christos
22aa10c0a0 Add /etc/route.conf processing to add static routes. Removes one more 
reason for netstart.local.
 2003-01-09 15:12:47 +00:00
jhawk
2c3ae584e1 Run ldconfig with ${rc_flags} so you can set ldconfig_flags in rc.conf 
to specify additional a.out directories to merge into the runtime link
cache.
 2003-01-08 04:17:19 +00:00
tron
2005231632 Revert last change for now. It causes hangs during system shutdown when 
NFS filesystems are mounted.
 2003-01-07 08:41:55 +00:00
tron
74efbb051c Add keyword "shutdown" so that this script is really executed on system 
shutdown to delete clone interfaces.
 2003-01-06 10:11:14 +00:00
wiz
247d6694f7 Handle links to absolute paths too. Closes my PR 19125. 2002-12-05 16:52:58 +00:00
lukem
2cc646d2d1 ipmon -D writes a pidfile; use it 2002-10-21 05:20:00 +00:00
kent
ba5fd9b3f8 /etc/rc.d/mixerctl: Add capability to save and restore mixer settings. 
Thanks to Julio Merino.
 2002-10-12 11:29:28 +00:00
elric
98839fb386 Added cgd rc.d script and put it in the appropriate postinstall and 
mtree files.
 2002-10-09 14:55:53 +00:00
atatat
a67080c774 Reorganize the sysdb script so that lkm{1,2,3} can request that the 
dev database be rebuilt after loading modules.  Loading modules might
create new nodes in /dev, but the dev database is being initialized
too soon for lkm2 and lkm3.  This means that, eg, /dev/xf86 (typically
marked AFTERMOUNT and loaded by lkm2) will show up properly.  Reviewed
by lukem.
 2002-10-08 16:21:52 +00:00
tron
6e40068171 Automatically create and destroy cloning interfaces and sync IP Filter 
immediately afterwards before bringing the interface up. This avoids
a small security gap existing in the previous scheme where IP Filter
was synced after all cloning interfaces were created and brought up.
 2002-10-05 05:24:40 +00:00
martti
3e11ad9d79 Print a warning message if IP forwarding is not activated (PR#10295). 2002-09-24 11:03:53 +00:00
perry
8a20c1019d create a utmpx with the same permissions as utmp 
Solves pr 18282, although very differently.
 2002-09-16 02:23:31 +00:00
abs
df86ef5a9f Split raidframe parity checking/rebuild out into raidframeparity, which is 
called after quota so we don't end up with fsck and raidframe parity rebuild
taking forever after a crash/reboot.
While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not
			    raid[0-9].conf & raid[0-9][0-9].conf
 2002-09-03 15:35:51 +00:00
takemura
b8ce6e8201 Added touch panel calibration utility. 2002-08-27 14:12:09 +00:00
martin
39acbf03ed Avoid exit(0) to play more nicely with rc_fast_and_loose. 
Noted by Greywolf on tech-userlevel.
 2002-08-16 18:05:19 +00:00
thorpej
afbf483286 Add a wdogctl startup/shutdown script. 2002-07-30 05:58:42 +00:00
bad
e9a1e24f95 Ignore "peer" statements for local clocks too when selecting hosts from 
ntp.conf.
 2002-07-19 03:22:09 +00:00
rafal
4b77d56d71 Skip blank lines in the input file (mixerctl.conf). 2002-07-16 03:24:24 +00:00
yamt
4b45ab0ce1 add comment: 
"if you're adding new scripts, don't forget to update
src/etc/postinstall and src/etc/mtree/special."
 2002-07-03 23:31:25 +00:00
itohy
908bf86adc Check for /dev/clockctl availability and print appropriate diagnosis if not. 2002-07-02 14:47:22 +00:00
grant
490569127e add wsmoused. 2002-06-29 04:07:08 +00:00
christos
7f89b13752 Add wsmoused 2002-06-27 15:08:55 +00:00
lukem
da820a3387 Build the list of names to check for $XXX_chrootdir support from 
`rcorder -k chrootdir` rather than hardcoding "named ntpd".
Based on [misc/16884] from Jarle Greipsland <jarle@uninett.no>
 2002-06-18 14:35:38 +00:00
lukem
56dc20a9f6 ntpd_chrootdir needs /dev/clockctl as well 2002-06-17 06:47:58 +00:00
lukem
3da8227a70 $ntpd_chroot requires "pseudo-device clockctl" in the kernel 2002-06-15 01:55:44 +00:00
lukem
4f32d6fce8 - at least require mountcritremote (mixerctl is in /usr) 
- read from < mixerctl.conf instead of piping output of cat...
 2002-06-11 16:31:41 +00:00
jmcneill
8ebbe63269 Fix typo. 2002-06-02 19:04:10 +00:00
jmcneill
56d95e6efe Add mixerctl script. 2002-06-02 18:37:45 +00:00
jmcneill
b055b3e3e4 Add boot script to load mixer settings from /etc/mixerctl.conf, if present. 
This allows one to preserve mixer settings across reboots by running:
  mixerctl -a >/etc/mixerctl.conf
 2002-06-02 18:36:46 +00:00
tron
a3ed40ee7c Sync ipf(4) after starting or stopping. This is necesarry to make filter 
rules for dynamically created interfaces like pppoe(4) effective.
 2002-05-04 13:53:02 +00:00
lukem
d1d73e68b7 don't bother warning or supporting obsolete $critical_filesystems_beforenet 
or $critical_filesystems; postinstall now checks for these
 2002-04-29 12:29:53 +00:00