#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
for pointing out that these drivers still used com_activate().
Use device_private(). Join some lines.
Remove superfluous activation hooks.
Add child-detachment hooks (not used, yet).
TBD: device_t/softc split.
activation hook, pcmcom_activate().
Add a child-detachment hook and use it.
Use device_private().
Cosmetic: use __arraycount(). Join a couple of lines. Delete a
set of superfluous parentheses.
Call the detach routine for every device in the device tree, starting
with the leaves and moving toward the root, expecting that each
(pseudo-)device driver will use the opportunity to gracefully commit
outstandings transactions to the underlying (pseudo-)device and to
relinquish control of the hardware to the system BIOS.
Detaching devices is not suitable for every shutdown: in an emergency,
or if the system state is inconsistent, we should resort to a fast,
simple shutdown that uses only the pmf(9) shutdown hooks and the
(deprecated) shutdownhooks. For now, if the flag RB_NOSYNC is set in
boothowto, opt for the fast, simple shutdown.
Add a device flag, DVF_DETACH_SHUTDOWN, that indicates by its presence
that it is safe to detach a device during shutdown. Introduce macros
CFATTACH_DECL3() and CFATTACH_DECL3_NEW() for creating autoconf
attachments with default device flags. Add DVF_DETACH_SHUTDOWN
to configuration attachments for atabus(4), atw(4) at cardbus(4),
cardbus(4), cardslot(4), com(4) at isa(4), elanpar(4), elanpex(4),
elansc(4), gpio(4), npx(4) at isa(4), nsphyter(4), pci(4), pcib(4),
pcmcia(4), ppb(4), sip(4), wd(4), and wdc(4) at isa(4).
Add a device-detachment "reason" flag, DETACH_SHUTDOWN, that tells the
autoconf code and a device driver that the reason for detachment is
system shutdown.
Add a sysctl, kern.detachall, that tells the system to try to detach
every device at shutdown, regardless of any device's DVF_DETACH_SHUTDOWN
flag. The default for kern.detachall is 0. SET IT TO 1, PLEASE, TO
HELP TEST AND DEBUG DEVICE DETACHMENT AT SHUTDOWN.
This is a work in progress. In future work, I aim to treat
pseudo-devices more thoroughly, and to gracefully tear down a stack of
(pseudo-)disk drivers and filesystems, including cgd(4), vnd(4), and
raid(4) instances at shutdown.
Also commit some changes that are not easily untangled from the rest:
(1) begin to simplify device_t locking: rename struct pmf_private to
device_lock, and incorporate device_lock into struct device.
(2) #include <sys/device.h> in sys/pmf.h in order to get some
definitions that it needs. Stop unnecessarily #including <sys/device.h>
in sys/arch/x86/include/pic.h to keep the amd64, xen, and i386 releases
building.
attach pcmcia devices before interrupts are enabled. This is unclean
because pcmcia drivers use tsleep(9) in the attach code path but it
worked all the time and it is too late to change this on the 5.0 branch.
So just tolerate it.
Fixes a regression on hpcsh reported by Valeriy E. Ushakov.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
shutting down -- this is only supposed to happen from the pcmcia
kernel thread while the system is running
-in wd_shutdown, call ata_addref first, so that the adapter is either
active or we know that it isn't
This fixes a hang on shutdown-p reported by Dennis den Brok per
PR kern/40531. Verified by by Dennis and me.
(reported against 5.0-Beta, so this is a pullup candidate)
When a link-layer address changes (e.g., ifconfig ex0 link
02🇩🇪ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.
Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address. (Thanks matt@.)
Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior. Make network drivers share more code.
Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.
Return consistent, appropriate error codes from network drivers.
Improve readability. KNF.
*** Details ***
In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.
In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.
Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr. That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.
In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.
Pull device initialization out of switch statements under
SIOCINITIFADDR. For example, pull ..._init() out of any switch
statement that looks like this:
switch (...->sa_family) {
case ...:
..._init();
...
break;
...
default:
..._init();
...
break;
}
Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,
switch (x & (IFF_UP|IFF_RUNNING)) {
case 0:
...
break;
case IFF_RUNNING:
...
break;
case IFF_UP:
...
break;
case IFF_UP|IFF_RUNNING:
...
break;
}
unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).
In ipw(4), remove an if_set_sadl() call that is out of place.
In nfe(4), reuse the jumbo MTU logic in ether_ioctl().
Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure. Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.
Return ENOTTY instead of EINVAL for inappropriate ioctls. In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.
Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source. In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.
Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.
In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.
Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.
In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.
Let ifioctl_common() handle SIOCGIFADDR.
Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.
In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.
bzero -> memset. Delete unnecessary casts to void *. Use
sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with
NULL instead of "testing truth". Replace some instances of (type
*)0 with NULL. Change some K&R prototypes to ANSI C, and join
lines.
