Part 1:
nd6_purge can be called after dom_ifdetach, and if_afdata[AF_INET6] is
going to be freed and point to garbage. Make sure we check for NULL, before
taking the pointer offset.
While I am here, add an M_ZERO.
into the kernel if the "IPSEC" kernel option is given.
The old implementation is still available as KAME_IPSEC.
Do some minimal manpage adjustment -- kame_ipsec(4) is a copy
of the old ipsec(4) and the latter is now a copy of fast_ipsec(4).
ipsec_*_policy() functions, as it was documented and used by clients
-remove "ipsec_policy_t" which was undocumented and only present
in the KAME version of the ipsec.h header
-misc cleanup of historical artefacts, and to remove unnecessary
differences between KAME ans FAST_IPSEC
KAME_IPSEC, and make IPSEC define it so that existing kernel
config files work as before
Now the default can be easily be changed to FAST_IPSEC just by
setting the IPSEC alias to FAST_IPSEC.
<20111022023242.BA26F14A158@mail.netbsd.org>. This change includes
the following:
An initial cleanup and minor reorganization of the entropy pool
code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are
fixed. Some effort is made to accumulate entropy more quickly at
boot time.
A generic interface, "rndsink", is added, for stream generators to
request that they be re-keyed with good quality entropy from the pool
as soon as it is available.
The arc4random()/arc4randbytes() implementation in libkern is
adjusted to use the rndsink interface for rekeying, which helps
address the problem of low-quality keys at boot time.
An implementation of the FIPS 140-2 statistical tests for random
number generator quality is provided (libkern/rngtest.c). This
is based on Greg Rose's implementation from Qualcomm.
A new random stream generator, nist_ctr_drbg, is provided. It is
based on an implementation of the NIST SP800-90 CTR_DRBG by
Henric Jungheim. This generator users AES in a modified counter
mode to generate a backtracking-resistant random stream.
An abstraction layer, "cprng", is provided for in-kernel consumers
of randomness. The arc4random/arc4randbytes API is deprecated for
in-kernel use. It is replaced by "cprng_strong". The current
cprng_fast implementation wraps the existing arc4random
implementation. The current cprng_strong implementation wraps the
new CTR_DRBG implementation. Both interfaces are rekeyed from
the entropy pool automatically at intervals justifiable from best
current cryptographic practice.
In some quick tests, cprng_fast() is about the same speed as
the old arc4randbytes(), and cprng_strong() is about 20% faster
than rnd_extract_data(). Performance is expected to improve.
The AES code in src/crypto/rijndael is no longer an optional
kernel component, as it is required by cprng_strong, which is
not an optional kernel component.
The entropy pool output is subjected to the rngtest tests at
startup time; if it fails, the system will reboot. There is
approximately a 3/10000 chance of a false positive from these
tests. Entropy pool _input_ from hardware random numbers is
subjected to the rngtest tests at attach time, as well as the
FIPS continuous-output test, to detect bad or stuck hardware
RNGs; if any are detected, they are detached, but the system
continues to run.
A problem with rndctl(8) is fixed -- datastructures with
pointers in arrays are no longer passed to userspace (this
was not a security problem, but rather a major issue for
compat32). A new kernel will require a new rndctl.
The sysctl kern.arandom() and kern.urandom() nodes are hooked
up to the new generators, but the /dev/*random pseudodevices
are not, yet.
Manual pages for the new kernel interfaces are forthcoming.
RTF_ANNOUNCE was defined as RTF_PROTO2. The flag is used to indicated
that host should act as a proxy for a link level arp or ndp request.
(If RTF_PROTO2 is used as an experimental flag (as advertised),
various problems can occur.)
This commit provides a first-class definition with its own bit for
RTF_ANNOUNCE, removes the old aliasing definitions, and adds support
for the new RTF_ANNOUNCE flag to netstat(8) and route(8).,
Also, remove unused RTF_ flags that collide with RTF_PROTO1:
netinet/icmp6.h defined RTF_PROBEMTU as RTF_PROTO1
netinet/if_inarp.h defined RTF_USETRAILERS as RTF_PROTO1
(Neither of these flags are used anywhere. Both have been removed
to reduce chances of collision with RTF_PROTO1.)
Figuring this out and the diff are the work of Beverly Schwartz of
BBN.
(Passed release build, boot in VM, with no apparently related atf
failures.)
Approved for Public Release, Distribution Unlimited
This material is based upon work supported by the Defense Advanced
Research Projects Agency and Space and Naval Warfare Systems Center,
Pacific, under Contract No. N66001-09-C-2073.
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.
- introduce a limit for the routes accepted via IPv6 Router Advertisement:
a common 2 interface client will have 6, the default limit is 100 and
can be adjusted via sysctl
- report the current number of routes installed via RA via sysctl
- count discarded route additions. Note that one RA message is two routes.
This is at present only across all interfaces even though per-interface
would be more useful, since the per-interface structure complies to RFC2466
- bump kernel version due to the previous change
- adjust netstat to use the new value (with netstat -p icmp6)
methods called Vestigial Time-Wait (VTW) and Maximum Segment Lifetime
Truncation (MSLT).
MSLT and VTW were contributed by Coyote Point Systems, Inc.
Even after a TCP session enters the TIME_WAIT state, its corresponding
socket and protocol control blocks (PCBs) stick around until the TCP
Maximum Segment Lifetime (MSL) expires. On a host whose workload
necessarily creates and closes down many TCP sockets, the sockets & PCBs
for TCP sessions in TIME_WAIT state amount to many megabytes of dead
weight in RAM.
Maximum Segment Lifetimes Truncation (MSLT) assigns each TCP session to
a class based on the nearness of the peer. Corresponding to each class
is an MSL, and a session uses the MSL of its class. The classes are
loopback (local host equals remote host), local (local host and remote
host are on the same link/subnet), and remote (local host and remote
host communicate via one or more gateways). Classes corresponding to
nearer peers have lower MSLs by default: 2 seconds for loopback, 10
seconds for local, 60 seconds for remote. Loopback and local sessions
expire more quickly when MSLT is used.
Vestigial Time-Wait (VTW) replaces a TIME_WAIT session's PCB/socket
dead weight with a compact representation of the session, called a
"vestigial PCB". VTW data structures are designed to be very fast and
memory-efficient: for fast insertion and lookup of vestigial PCBs,
the PCBs are stored in a hash table that is designed to minimize the
number of cacheline visits per lookup/insertion. The memory both
for vestigial PCBs and for elements of the PCB hashtable come from
fixed-size pools, and linked data structures exploit this to conserve
memory by representing references with a narrow index/offset from the
start of a pool instead of a pointer. When space for new vestigial PCBs
runs out, VTW makes room by discarding old vestigial PCBs, oldest first.
VTW cooperates with MSLT.
It may help to think of VTW as a "FIN cache" by analogy to the SYN
cache.
A 2.8-GHz Pentium 4 running a test workload that creates TIME_WAIT
sessions as fast as it can is approximately 17% idle when VTW is active
versus 0% idle when VTW is inactive. It has 103 megabytes more free RAM
when VTW is active (approximately 64k vestigial PCBs are created) than
when it is inactive.
will have an easier time replacing it with something different, even if
it is a second radix-trie implementation.
sys/net/route.c and sys/net/rtsock.c no longer operate directly on
radix_nodes or radix_node_heads.
Hopefully this will reduce the temptation to implement multipath or
source-based routing using grotty hacks to the grotty old radix-trie
code, too. :-)
with an uninitialized struct ip6_pktopts on the stack, opt.
ip6_clearpktopts(&opt, ...) could dereference dangling pointers,
leading to memory corruption or a crash. Now, udp6_output() calls
ip6_clearpktopts(&opt, ...) only if opt was initialized. Thanks to
Clement LECIGNE for reporting this bug.
Fix a potential memory leak: it is udp6_output()'s responsibility
to free its mbuf arguments on error. In the unlikely event that
sa6_embedscope() failed, udp6_output() would not free its mbuf
arguments.
I will ask for this to be pulled up to -4, -5, and -5-0.
nd6_storelladdr: sdl_alen == 0, dst=... if=wm1", add printfs for some
"impossible" conditions, and make the nd6_storelladdr() printf more
informative by printing the value of sdl_alen.
rmind