Add a new explicit `struct proc *p' argument to socreate(), sosend().
Use that argument instead of curproc. Follow-on changes to pass that
argument to socreate(), sosend(), and (*so->so_send)() calls.
These changes reviewed and independently recoded by Matt Thomas.
Changes to soreceive() and (*dom->dom_exernalize() from Matt Thomas:
pass soreceive()'s struct uio* uio->uio_procp to unp_externalize().
Eliminate curproc from unp_externalize. Also, now soreceive() uses
its uio->uio_procp value, pass that same value downward to
((pr->pru_usrreq)() calls for consistency, instead of (struct proc * )0.
Similar changes in sys/nfs to eliminate (most) uses of curproc,
either via the req-> r_procp field of a struct nfsreq *req argument,
or by passing down new explicit struct proc * arguments.
Reviewed by: Matt Thomas, posted to tech-kern.
NB: The (*pr->pru_usrreq)() change should be tested on more (all!) protocols.
attempt is terminated, so if a process needs frequent timer interrupts
it can't ever connect() to a machine far away.
Bug found by Erik Lundgren, bugfix (for the same problem) is similar to
the way FreeBSD solved the same problem.
As a side effect, the new connect() behaviour conformes to Posix.
accepted. However, this time this behavor is not the default. Instead
it must enabled by using the LOCAL_CONNWAIT socket option on either the
connecting or accepting socket.
copyin() or copyout().
uvm_useracc() tells us whether the mapping permissions allow access to
the desired part of an address space, and many callers assume that
this is the same as knowing whether an attempt to access that part of
the address space will succeed. however, access to user space can
fail for reasons other than insufficient permission, most notably that
paging in any non-resident data can fail due to i/o errors. most of
the callers of uvm_useracc() make the above incorrect assumption. the
rest are all misguided optimizations, which optimize for the case
where an operation will fail. we'd rather optimize for operations
succeeding, in which case we should just attempt the access and handle
failures due to insufficient permissions the same way we handle i/o
errors. since there appear to be no good uses of uvm_useracc(), we'll
just remove it.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *)
to m_get*(M_WAIT, *). These are not performance critical and making them
call m_get saves considerable space. Add m_clget analogue of MCLGET and
make corresponding change for M_WAIT uses.
Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE.
Begin to change netstat to use sysctl.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
arrange things as needed. Unfortunately, the check in sockargs()
have to stay, since 4.3BSD bind(2), connect(2) and sendto(2) were
not versioned at the time :(
This code was tested to pass regression tests.
is supposed to point directly to struct mbuf or struct sockaddr in kernel
space as appropriate, rather than being a pointer to memory in userland.
This is to be used by compat/* when emulation needs to wrap
send{to|msg}(2)/recv{from|msg}(2) and modify the passed struct
sockaddr.
for FreeBSD project. Besides huge speed boost compared with socketpair-based
pipes, this implementation also uses pagable kernel memory instead of mbufs.
Significant differences to FreeBSD version:
* uses uvm_loan() facility for direct write
* async/SIGIO handling correct also for sync writer, async reader
* limits settable via sysctl, amountpipekva and nbigpipes available via sysctl
* pipes are unidirectional - this is enforced on file descriptor level
for now only, the code would be updated to take advantage of it
eventually
* uses lockmgr(9)-based locks instead of home brew variant
* scatter-gather write is handled correctly for direct write case, data
is transferred by PIPE_DIRECT_CHUNK bytes maximum, to avoid running out of kva
All FreeBSD/NetBSD specific code is within appropriate #ifdef, in preparation
to feed changes back to FreeBSD tree.
This pipe implementation is optional for now, add 'options NEW_PIPE'
to your kernel config to use it.
between creation of a file descriptor and close(2) when using kernel
assisted threads. What we do is stick descriptors in the table, but
mark them as "larval". This causes essentially everything to treat
it as a non-existent descriptor, except for fdalloc(), which sees a
filled slot so that it won't (incorrectly) allocate it again. When
a descriptor is fully constructed, the code that has constructed it
marks it as "mature" (which actually clears the "larval" flag), and
things continue to work as normal.
While here, gather all the code that gets a descriptor from the table
into a fd_getfile() function, and call it, rather than having the
same (sometimes incorrect) code copied all over the place.
flag.
EMUL_BSD_ASYNCIO_PIPE notes that the emulated binaries expect the original
BSD pipe behavior for asynchronous I/O, which is to fire SIGIO on read() and
write(). OSes without this flag do not expect any SIGIO to be fired on
read() and write() for pipes, even when async I/O was requested. As far as
we know, the OSes that need EMUL_BSD_ASYNCIO_PIPE are NetBSD, OSF/1 and
Darwin.
passed it down to the appropriate usrreq function, and this
allows usage for contexts that need to be explicitly different
from curproc (like in the NFS code when binding to a reserved port).
- Change ktrace interface to pass in the current process, rather than
p->p_tracep, since the various ktr* function need curproc anyway.
- Add curproc as a parameter to mi_switch() since all callers had it
handy anyway.
- Add a second proc argument for inferior() since callers all had
curproc handy.
Also, miscellaneous cleanups in ktrace:
- ktrace now always uses file-based, rather than vnode-based I/O
(simplifies, increases type safety); eliminate KTRFLAG_FD & KTRFAC_FD.
Do non-blocking I/O, and yield a finite number of times when receiving
EWOULDBLOCK before giving up.
- move code duplicated between sys_fktrace and sys_ktrace into ktrace_common.
- simplify interface to ktrwrite()
recover from failures to accept a socket successfully. Problem suggested
by this:
> It would appear (from two "panic: closef: count < 0" failures in less
> than 12 hours) that Darren's fix to accept(2) for lost file descriptors
> isn't quite correct. His fix inserts a call to closef() to handle one
> of several possible error conditions. However everywhere else in the
> socket code in the same file where falloc() cleanup is necessary the
> function used is ffree().
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
listen/accept (PR_LISTEN flag in protosw) and detect obvious faults in
parameters passed. It is still possible for the address used for copying
the socket information to become invalid between that check and the copyout
so close the connection's allocated fd if the copyout fails so that we can
return EFAULT without allocating an fd and the application not knowing about
it. Ideally we'd be able to queue the connection back up so a later accept
could retrieve it but unfortunately that's not possible.
count is 0, wait for use count to drain before finishing the close.
This is necessary in order for multiple processes to safely share file
descriptor tables.
arguments passed to accept(), bind(), connect(), getpeername(), getsockname(),
getsockopt(), recvfrom(), sendto() and sendmsg() unsigned, which also elimiates
a few casts.
* Reflect the (now) signedness of msg_iovlen, which necessiates the addition
of a few casts.
There are two reasons for this:
* We should be able to pass file descriptors without sending any data.
* We could send zero-length iovecs anyway (but we shouldn't have to do this).
Also, msg_iovlen is already a u_int, so delete a bunch of casts.
jonathan