- Add sysarch methods for "get bus window count", "get bus window",
and "pci conf read/write".
These are a hack, but they're what's necessary in order to make
XFree86 work in its current state.
of adjacent DMA segments.
XXX This is still not perfect... but making it perfect will probably
require additions to the bus_dma interface and the ISA autoconfiguration
interface.
overlap; don't require allocation from the dense extent if the PCI
memory address isn't mapped into dense space.
Also, make sure to return an error if a liner mapping is requested
and dense space is not available (not just not requested).
configuring w/o SIO broke compilation. I forget why, but there was at one
point (and may still be) a dependency between SIO and EISA. This change
just makes things compile sensibly again. It may make no sense to build
a kernel w/o sio in this case. I can't test this conveniently because I
haven't got a 4100 with a video card in it at the moment.
- Actually display the kn300 irq, not the MCPCIA irq, in the interrupt
string. Also, don't bother displaying device/pin on strays, since
it doesn't play will with shared interrupts that would happen due to
a PCI-PCI bridge.
- Shave a few more cycles out of the interrupt dispatch routine.
supposed to be Window 1, but a cut'n'paste error made it stomp over
Window 0, thus breaking ISA DMA. Fix this. (Confirmed to work with
floppy driver.)
While I'm here, do something I've been meaning to do for a while: change
Window 1 from a 1G at 2G to a 2G at 2G direct-mapped window, and add
a Window 2 of 1G at 1G SGMAP-mapped. Chain Window 2 to Window 1, and
use it as a fall-back for PCI DMA if the system has more than 2G of RAM.
The access is more efficient this way (and this was done in the interrupt
dispatch code, so some cycles are actually shaved), and gcc gets annoyed
when chars are used as array subscripts.
- Adjust for the fixed Rawhide console initialization.
- When mapping a PCI interrupt, don't always map device 1 to IRQ 16. Device
1 is only the internal 53c810 on MID 5, and is an invalid device number
on any other MID.
- Adjust for change mcpcia_config/mcpcia_softc structures.
- Nuke the kludgy linked list of mcpcia_softc structures. Instead, just
use savunit[v] to index into mcpcia_cd.cd_devs[] to find the MCPCIA
which has the stray interrupt.
- Some other minor cosmetic cleanup.
which holds state of the MCPCIA to which the console is attached.
- All MCPCIA info is now stored in the mcpcia_config structure; the
mcpcia_softc only contains a struct device and a pointer to one of these.
- If attaching the console MCPCIA, use the static configuration, else allocate
the substructure.
- Rename mcpcia_init() to mcpcia_init0(), and make it take a "mallocsafe"
argument.
- Implement a new mcpcia_init(), which looks for the MCPCIA which has the
EISA bridge attached. Initialize this MCPCIA as the console MCPCIA (the
console on the Rawhide is only allowed on this MCPCIA; firmware rule).
- Eliminate the kludgy linked listed of mcpcia_softcs. Just use mcpcia_cd
to find all configured instances.
Separate bug fix: Actually clear the MCPCIA error mask after probing for
PCI (and ISA) devices, don't just clear it twice in mcpcia_init0().
Some other slight cleanup.
drochner