reading blocks that isn't written yet.
it's needed because we'll update metadatas in lfs_updatemeta
before data pointed by them is actually written to disk.
XXX should be solved with fake inode/indirect blocks instead?
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
This is the bulk of PR #17345
The general approach is to use a run time deteriminable value
for DIRBLKSIZ. Additional allowances are included for using
MAXSYMLINKLEN with FS_42INODEFMT and a shift in the cylinder group
cluster summary count array. Support is added for managing
the Apple UFS volume label.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
exist on an on-disk inode, we keep a record of its size in struct inode,
which is updated when we write the block to disk. The cleaner routines
thus have ready access to what size is the correct size for this block,
on disk.
Fixed a related bug: if a file with fragments is being cleaned
(fragments being cleaned) at the same time it is being extended beyond
NDADDR blocks, we could write a bogus FINFO record that has a frag in the
middle; when it was cleaned this would give back bogus file data. Don't
write the indirect blocks in this case, since there is no need.
lfs_fragextend and lfs_truncate no longer require the seglock, but instead
take a shared lock, which the seglock locks exclusively.
processes don't have to wait for one another to finish (e.g., nfsd seems
to be a little happier now, though I haven't measured the difference).
Synchronous checkpoints, however, must always wait for all i/o to finish.
Take the contents of the callback functions and have them run in thread
context instead (aiodoned thread). lfs_iocount no longer has to be
protected in splbio(), and quite a bit less of the segment construction
loop needs to be in splbio() as well.
If lfs_markv is handed a block that is not the correct size according to
the inode, refuse to process it. (Formerly it was extended to the "correct"
size.) This is possibly more prone to deadlock, but less prone to corruption.
lfs_segclean now outright refuses to clean segments that appear to have live
bytes in them. Again this may be more prone to deadlock but avoids
corruption.
Replace ufsspec_close and ufsfifo_close with LFS equivalents; this means
that no UFS functions need to know about LFS_ITIMES any more. Remove
the reference from ufs/inode.h.
Tested on i386, test-compiled on alpha.
this enables one to recover data from a failing disk (where the read failure
is a hardware problem) while avoiding corrupting the fs further (in the case
where the read failure is due to a misconfiguration).
as well as bi_daddr. This lets the cleaner have an idea of what the size
of this block was at the time it was written without having to refer to
a segment header (e.g., in the file coalescing case).
Tested on i386.
enough to be useful, and broadening it so that it did would have meant
that operations possibly requiring synchronous disk activity would have
to be done in splbio(). This clearly was not going to work.
Worked around this in the LFS case by having lfs_cluster_callback put an
extra hold on the vnode before calling biodone(), and taking the hold
off without HOLDRELE's problematic list swapping. lfs_vunref() will take
care of that---in thread context---on the next write if need be.
Also, ensure that the list walking in lfs_{writevnodes,segunlock,gather}
takes into account the possibility that the list may change
underneath it (possibly because it itself deleted an element).
Tested on i386, test-compiled on alpha.
I found while making sure there weren't any new ones.
* Make the write clusters keep track of the buffers whose blocks they contain.
This should make it possible to (1) write clusters using a page mapping
instead of malloc, if desired, and (2) schedule blocks for rewriting
(somewhere else) if a write error occurs. Code is present to use
pagemove() to construct the clusters but that is untested and will go away
anyway in favor of page mapping.
* DEBUG now keeps a log of Ifile writes, so that any lingering instances of
the "dirty bufs" problem can be properly debugged.
* Keep track of whether the Ifile has been dirtied by various routines that
can be called by lfs_segwrite, and loop on that until it is clean, for
a checkpoint. Checkpoints need to be squeaky clean.
* Warn the user (once) if the Ifile grows larger than is reasonable for their
buffer cache. Both lfs_mountfs and lfs_unmount check since the Ifile can
grow.
* If an inode is not found in a disk block, try rereading the block, under
the assumption that the block was copied to a cluster and then freed.
* Protect WRITEINPROG() with splbio() to fix a hang in lfs_update.
- If VOP_ACCESS fails when updating mount, we will vrele() twice.
- The check for update-only flags in mp->mnt_flag when not updating
case is bogus. If we really want to check, we need to see flags in
ufs_args, but I'm not sure if it is really necessary.
- The credential passed to ffs_reload was credential of when looking
up mount point, but now it is credential of when looking up device
node. Anyway, it may be current process's credential.
to verify that the device is at least as big as the superblock claims
the filesystem is supposed to be, and if it's not then fail the mount.
this should help reduce the type of confusion reported in PR 13228.
deal with shortages of the VM maps where the backing pages are mapped
(usually kmem_map). Try to deal with this:
* Group all information about the backend allocator for a pool in a
separate structure. The pool references this structure, rather than
the individual fields.
* Change the pool_init() API accordingly, and adjust all callers.
* Link all pools using the same backend allocator on a list.
* The backend allocator is responsible for waiting for physical memory
to become available, but will still fail if it cannot callocate KVA
space for the pages. If this happens, carefully drain all pools using
the same backend allocator, so that some KVA space can be freed.
* Change pool_reclaim() to indicate if it actually succeeded in freeing
some pages, and use that information to make draining easier and more
efficient.
* Get rid of PR_URGENT. There was only one use of it, and it could be
dealt with by the caller.
From art@openbsd.org.
in f_bfree, which is added to f_bavail.
Fixes problem with statfs reporting too much free space for filesystems
which have files pending to be freed by softdeps.
date: 2002/02/07 00:54:32; author: mckusick; state: Exp; lines: +10 -7
Occationally deleted files would hang around for hours or days
without being reclaimed. This bug was introduced in revision 1.95
dealing with filenames placed in newly allocated directory blocks,
thus is not present in 4.X systems. The bug is triggered when a
new entry is made in a directory after the data block containing
the original new entry has been written, but before the inode
that references the data block has been written.
Submitted by: Bill Fenner <fenner@research.att.com>
This should fix NetBSD PR 15531.
do not mark the filesystem clean, as this will mean that one or more
files were likely not completely removed (will show up as unconnected
in fsck). Prevents filesystems from being marked clean while they're
not until this problem has been figured out.
would result in a vop_inactive call for the vnode each time, resulting
in vinvalbuf->fsync. The original softdep code avoided the fsync
in vinvalbuf by not calling it if there were no dirty blocks. This
was changed in NetBSD. Also, flush_inodedeps was changed to mark
the inode as modified so that it would do an inode update and flush the
last one. This combination basically caused a sync write for each removed
file in an rm -rf (showing up delayed from the syncer a lot of the time).
If called from vinvalbuf (FSYNC_RECLAIM), and there were no dirty blocks
or pages to begin with, still do everything as normal, so that possible dirty
blocks in transit to disk are properly waited for, etc, but don't pass
UPDATE_WAIT to VOP_UPDATE, since there is no need for it in that case.
from Kirk McKusick. They implement taking pending block/inode frees
into account for the sake of correct statfs() numbers, and adding
a new softdep type (newdirblk) to correctly handle newly allocated
directory blocks.
Minor additional changes: 1) swap the newly introduced fs_pendinginodes
and fs_pendingblock fields in ffs_sb_swap, and 2) declare lkt_held
in the debug version of the softdep lock structure volatile, as it
can be modified from interrupt context #ifdef DEBUG.
was wrong, so fix it right this time. undo the previous change and
instead, replace the troublesome VOP_FSYNC()s with code that just flushes
the particular indirect blocks that we allocated. this resolves the
softdeps for those blocks. then we can change the pointer for
the first indirect block we allocated to zero, write that, and finally
invalidate all the indirect blocks we've touched. also, wait until
after we finish all this before freeing any blocks we allocated.
fixes PRs 14413 and 14423.
deal with the fragment expansion separately before the rest of the operation.
this allows us to simplify ufs_balloc_range() by not worrying about implicit
fragment expansion.
call VOP_PUTPAGES() directly for vnodes instead of
going through the UVM pager "put" vector.
- calculate the offset and length of the postbl before byteswapping.
problem noted by der Mouse.
- use offsetof() to determine # of fields to calculate in initial
loop, rather than hard-coding in `52 fields'
- improve comments.
fragment synchronously, update the vnode's size before doing the flush.
otherwise we might only write part of the data and cause softdep's
accounting to get out of sync. fixes PR 14201.
many thanks to enami for figuring out what was going on.
spotted by Nathan Williams.
while I'm here, move an splbio() so that we don't return without
splx()ing it if there's an error, and don't bother calling the
pager put if the vnode has no pages.
- don't both updating fs->fs_cgrotor, since it's actually not used in
the kernel. from Manuel Bouyer in [kern/3389]
- when examining cylinder groups from startcg to startcg-1 (wrapping
at fs->fs_ncg), there's no need to check startcg at the end as well
as the start...
- highlight in the struct fs declaration that fs_cgrotor is UNUSED
- remove special treatment of pager_map mappings in pmaps. this is
required now, since I've removed the globals that expose the address range.
pager_map now uses pmap_kenter_pa() instead of pmap_enter(), so there's
no longer any need to special-case it.
- eliminate struct uvm_vnode by moving its fields into struct vnode.
- rewrite the pageout path. the pager is now responsible for handling the
high-level requests instead of only getting control after a bunch of work
has already been done on its behalf. this will allow us to UBCify LFS,
which needs tighter control over its pages than other filesystems do.
writing a page to disk no longer requires making it read-only, which
allows us to write wired pages without causing all kinds of havoc.
- use a new PG_PAGEOUT flag to indicate that a page should be freed
on behalf of the pagedaemon when it's unlocked. this flag is very similar
to PG_RELEASED, but unlike PG_RELEASED, PG_PAGEOUT can be cleared if the
pageout fails due to eg. an indirect-block buffer being locked.
this allows us to remove the "version" field from struct vm_page,
and together with shrinking "loan_count" from 32 bits to 16,
struct vm_page is now 4 bytes smaller.
- no longer use PG_RELEASED for swap-backed pages. if the page is busy
because it's being paged out, we can't release the swap slot to be
reallocated until that write is complete, but unlike with vnodes we
don't keep a count of in-progress writes so there's no good way to
know when the write is done. instead, when we need to free a busy
swap-backed page, just sleep until we can get it busy ourselves.
- implement a fast-path for extending writes which allows us to avoid
zeroing new pages. this substantially reduces cpu usage.
- encapsulate the data used by the genfs code in a struct genfs_node,
which must be the first element of the filesystem-specific vnode data
for filesystems which use genfs_{get,put}pages().
- eliminate many of the UVM pagerops, since they aren't needed anymore
now that the pager "put" operation is a higher-level operation.
- enhance the genfs code to allow NFS to use the genfs_{get,put}pages
instead of a modified copy.
- clean up struct vnode by removing all the fields that used to be used by
the vfs_cluster.c code (which we don't use anymore with UBC).
- remove kmem_object and mb_object since they were useless.
instead of allocating pages to these objects, we now just allocate
pages with no object. such pages are mapped in the kernel until they
are freed, so we can use the mapping to find the page to free it.
this allows us to remove splvm() protection in several places.
The sum of all these changes improves write throughput on my
decstation 5000/200 to within 1% of the rate of NetBSD 1.5
and reduces the elapsed time for "make release" of a NetBSD 1.5
source tree on my 128MB pc to 10% less than a 1.5 kernel took.
allocate memory from kernel_map but some of the objects are freed from
interrupt context, we put objects on a queue instead of freeing them
immediately. then in softdep_process_worklist() (which is called at
least once per second from the syncer), we process that queue and
free all the objects. allocating from kernel_map instead of from kmem_map
allows us to have a much larger number of softdeps pending even in
configurations where kmem_map is relatively small.
adjusted via sysctl. file systems that have hash tables which are
sized based on the value of this variable now resize those hash tables
using the new value. the max number of FFS softdeps is also recalculated.
convert various file systems to use the <sys/queue.h> macros for
their hash tables.
FreeBSD (three commits; the initial work, man page updates, and a fix
to ffs_reload()), with the following differences:
- Be consistent between newfs(8) and tunefs(8) as to the options which
set and control the tuning parameters for this work (avgfilesize & avgfpdir)
- Use u_int16_t instead of u_int8_t to keep track of the number of
contiguous directories (suggested by Chuck Silvers)
- Work within our FFS_EI framework
- Ensure that fs->fs_maxclusters and fs->fs_contigdirs don't point to
the same area of memory
The new algorithm has a marked performance increase, especially when
performing tasks such as untarring pkgsrc.tar.gz, etc.
The original FreeBSD commit messages are attached:
=====
mckusick 2001/04/10 01:39:00 PDT
Directory layout preference improvements from Grigoriy Orlov <gluk@ptci.ru>.
His description of the problem and solution follow. My own tests show
speedups on typical filesystem intensive workloads of 5% to 12% which
is very impressive considering the small amount of code change involved.
------
One day I noticed that some file operations run much faster on
small file systems then on big ones. I've looked at the ffs
algorithms, thought about them, and redesigned the dirpref algorithm.
First I want to describe the results of my tests. These results are old
and I have improved the algorithm after these tests were done. Nevertheless
they show how big the perfomance speedup may be. I have done two file/directory
intensive tests on a two OpenBSD systems with old and new dirpref algorithm.
The first test is "tar -xzf ports.tar.gz", the second is "rm -rf ports".
The ports.tar.gz file is the ports collection from the OpenBSD 2.8 release.
It contains 6596 directories and 13868 files. The test systems are:
1. Celeron-450, 128Mb, two IDE drives, the system at wd0, file system for
test is at wd1. Size of test file system is 8 Gb, number of cg=991,
size of cg is 8m, block size = 8k, fragment size = 1k OpenBSD-current
from Dec 2000 with BUFCACHEPERCENT=35
2. PIII-600, 128Mb, two IBM DTLA-307045 IDE drives at i815e, the system
at wd0, file system for test is at wd1. Size of test file system is 40 Gb,
number of cg=5324, size of cg is 8m, block size = 8k, fragment size = 1k
OpenBSD-current from Dec 2000 with BUFCACHEPERCENT=50
You can get more info about the test systems and methods at:
http://www.ptci.ru/gluk/dirpref/old/dirpref.html
Test Results
tar -xzf ports.tar.gz rm -rf ports
mode old dirpref new dirpref speedup old dirprefnew dirpref speedup
First system
normal 667 472 1.41 477 331 1.44
async 285 144 1.98 130 14 9.29
sync 768 616 1.25 477 334 1.43
softdep 413 252 1.64 241 38 6.34
Second system
normal 329 81 4.06 263.5 93.5 2.81
async 302 25.7 11.75 112 2.26 49.56
sync 281 57.0 4.93 263 90.5 2.9
softdep 341 40.6 8.4 284 4.76 59.66
"old dirpref" and "new dirpref" columns give a test time in seconds.
speedup - speed increasement in times, ie. old dirpref / new dirpref.
------
Algorithm description
The old dirpref algorithm is described in comments:
/*
* Find a cylinder to place a directory.
*
* The policy implemented by this algorithm is to select from
* among those cylinder groups with above the average number of
* free inodes, the one with the smallest number of directories.
*/
A new directory is allocated in a different cylinder groups than its
parent directory resulting in a directory tree that is spreaded across
all the cylinder groups. This spreading out results in a non-optimal
access to the directories and files. When we have a small filesystem
it is not a problem but when the filesystem is big then perfomance
degradation becomes very apparent.
What I mean by a big file system ?
1. A big filesystem is a filesystem which occupy 20-30 or more percent
of total drive space, i.e. first and last cylinder are physically
located relatively far from each other.
2. It has a relatively large number of cylinder groups, for example
more cylinder groups than 50% of the buffers in the buffer cache.
The first results in long access times, while the second results in
many buffers being used by metadata operations. Such operations use
cylinder group blocks and on-disk inode blocks. The cylinder group
block (fs->fs_cblkno) contains struct cg, inode and block bit maps.
It is 2k in size for the default filesystem parameters. If new and
parent directories are located in different cylinder groups then the
system performs more input/output operations and uses more buffers.
On filesystems with many cylinder groups, lots of cache buffers are
used for metadata operations.
My solution for this problem is very simple. I allocate many directories
in one cylinder group. I also do some things, so that the new allocation
method does not cause excessive fragmentation and all directory inodes
will not be located at a location far from its file's inodes and data.
The algorithm is:
/*
* Find a cylinder group to place a directory.
*
* The policy implemented by this algorithm is to allocate a
* directory inode in the same cylinder group as its parent
* directory, but also to reserve space for its files inodes
* and data. Restrict the number of directories which may be
* allocated one after another in the same cylinder group
* without intervening allocation of files.
*
* If we allocate a first level directory then force allocation
* in another cylinder group.
*/
My early versions of dirpref give me a good results for a wide range of
file operations and different filesystem capacities except one case:
those applications that create their entire directory structure first
and only later fill this structure with files.
My solution for such and similar cases is to limit a number of
directories which may be created one after another in the same cylinder
group without intervening file creations. For this purpose, I allocate
an array of counters at mount time. This array is linked to the superblock
fs->fs_contigdirs[cg]. Each time a directory is created the counter
increases and each time a file is created the counter decreases. A 60Gb
filesystem with 8mb/cg requires 10kb of memory for the counters array.
The maxcontigdirs is a maximum number of directories which may be created
without an intervening file creation. I found in my tests that the best
performance occurs when I restrict the number of directories in one cylinder
group such that all its files may be located in the same cylinder group.
There may be some deterioration in performance if all the file inodes
are in the same cylinder group as its containing directory, but their
data partially resides in a different cylinder group. The maxcontigdirs
value is calculated to try to prevent this condition. Since there is
no way to know how many files and directories will be allocated later
I added two optimization parameters in superblock/tunefs. They are:
int32_t fs_avgfilesize; /* expected average file size */
int32_t fs_avgfpdir; /* expected # of files per directory */
These parameters have reasonable defaults but may be tweeked for special
uses of a filesystem. They are only necessary in rare cases like better
tuning a filesystem being used to store a squid cache.
I have been using this algorithm for about 3 months. I have done
a lot of testing on filesystems with different capacities, average
filesize, average number of files per directory, and so on. I think
this algorithm has no negative impact on filesystem perfomance. It
works better than the default one in all cases. The new dirpref
will greatly improve untarring/removing/coping of big directories,
decrease load on cvs servers and much more. The new dirpref doesn't
speedup a compilation process, but also doesn't slow it down.
Obtained from: Grigoriy Orlov <gluk@ptci.ru>
=====
=====
iedowse 2001/04/23 17:37:17 PDT
Pre-dirpref versions of fsck may zero out the new superblock fields
fs_contigdirs, fs_avgfilesize and fs_avgfpdir. This could cause
panics if these fields were zeroed while a filesystem was mounted
read-only, and then remounted read-write.
Add code to ffs_reload() which copies the fs_contigdirs pointer
from the previous superblock, and reinitialises fs_avgf* if necessary.
Reviewed by: mckusick
=====
=====
nik 2001/04/10 03:36:44 PDT
Add information about the new options to newfs and tunefs which set the
expected average file size and number of files per directory. Could do
with some fleshing out.
=====
in an effort to maintain compatibility with freebsd/openbsd/whatever,
i'm attempting to get the superblock format in sync, and freebsd uses
the int32_t at this position for `fs_pendinginodes'.
if we ever decide to implement fscktime functionality, we'll:
a) make sure to liaise with the other projects to reserve the same
spare field
b) actually implement the code this time ...
(this is also preparing us for other changes, like the new dirpref code)
cylinder groups to work correctly, with minor modifications by me to work
with our FFS_EI code. From the FreeBSD commit message:
The ffs superblock includes a 128-byte region for use by temporary
in-core pointers to summary information. An array in this region
(fs_csp) could overflow on filesystems with a very large number of
cylinder groups (~16000 on i386 with 8k blocks). When this happens,
other fields in the superblock get corrupted, and fsck refuses to
check the filesystem.
Solve this problem by replacing the fs_csp array in 'struct fs'
with a single pointer, and add padding to keep the length of the
128-byte region fixed. Update the kernel and userland utilities
to use just this single pointer.
With this change, the kernel no longer makes use of the superblock
fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c
to indicate that these fields must be calculated for compatibility
with older kernels.
Reviewed by: mckusick
- Cast blk argument to lblktosize() to (off_t), to prevent 32 bit overflow.
whilst almost every use in ffs used this for small blknos, there are
potential issues, and it's safer this way. (as discussed with chuq)
- Use 64bit (off_t) math to calculate if we have hit our freespace() limit.
Necessary for coherent results on filesystems bigger than 0.5Tb.
- Use lblktosize() in blksize() and dblksize(), to make it obvious what's
happening
- Remove sblksize() - nothing uses it
- replace the unused fs_headswitch and fs_trkseek with fs_id[2], bringing
our struct fs closer to that in freebsd & openbsd (& solaris FWIW)
- dumpfs: improve warning message when cpc == 0
determine the endianness of the `struct fs *o' superblock from o->fs_magic
and set needswap as necessary, rather than trusting the caller to get
it right. invariably, almost every caller of ffs_sb_swap() was calling it
with ns set to the wrong value for ns anyway!
ansi KNF ffs_bswap.c declarations whilst here.
this fixes all sorts of problems when trying to use other-endian file systems,
notably the kernel trying to access memory *way* off, possibly corrupting or
panicing, and userland programs SEGVing and/or corrupting things (e.g,
"fsck_ffs -B" to swap a file system endianness).
whilst the previous rev of ffs_bswap.c (1.10, 2000/12/23) made this problem
worse, i suspect that the problem was always there and previous versions
just happened not to trash things at the wrong time.
FFS_EI should now be a lot more stable.
Kernels and tools understand both v1 and v2 filesystems; newfs_lfs
generates v2 by default. Changes for the v2 layout include:
- Segments of non-PO2 size and arbitrary block offset, so these can be
matched to convenient physical characteristics of the partition (e.g.,
stripe or track size and offset).
- Address by fragment instead of by disk sector, paving the way for
non-512-byte-sector devices. In theory fragments can be as large
as you like, though in reality they must be smaller than MAXBSIZE in size.
- Use serial number and filesystem identifier to ensure that roll-forward
doesn't get old data and think it's new. Roll-forward is enabled for
v2 filesystems, though not for v1 filesystems by default.
- The inode free list is now a tailq, paving the way for undelete (undelete
is not yet implemented, but can be without further non-backwards-compatible
changes to disk structures).
- Inode atime information is kept in the Ifile, instead of on the inode;
that is, the inode is never written *just* because atime was changed.
Because of this the inodes remain near the file data on the disk, rather
than wandering all over as the disk is read repeatedly. This speeds up
repeated reads by a small but noticeable amount.
Other changes of note include:
- The ifile written by newfs_lfs can now be of arbitrary length, it is no
longer restricted to a single indirect block.
- Fixed an old bug where ctime was changed every time a vnode was created.
I need to look more closely to make sure that the times are only updated
during write(2) and friends, not after-the-fact during a segment write,
and certainly not by the cleaner.
vfs_busy'ing just before the dounmount() call. This is to avoid
sleeping with the mountlist_slock held -- but we must acquire
syncer_lock before vfs_busy because the syncer itself uses
syncer_lock -> vfs_busy locking order.
space before deciding which cylinder group should contain a new directory
inode.
Fixes kern/11983; works around some, but not all, of the side effects
of kern/11989.
Tested by me for well over a month on my laptop; preliminary versions of
the fix were tested by Frank van der Linden and Herb Peyerl.
in effect cosmetic). Original FreeBSD commit messages:
==
date: 2000/03/15 07:18:15; author: mckusick; state: Exp; lines: +4 -4
Bug fixes for currently harmless bugs that could rise to bite
the unwary if the code were called in slightly different ways.
[...]
2) In ufs_lookup() there is an off-by-one error in the test that checks
if dp->i_diroff is outside the range of the the current directory size.
This is completely harmless, since the following while-loop condition
'dp->i_offset < endsearch' is never met, so the code immediately
does a second pass starting at dp->i_offset = 0.
3) Again in ufs_lookup(), the condition in a sanity check is wrong
for directories that are longer than one block. This bug means that
the sanity check is only effective for small directories.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
==
date: 2000/03/09 18:54:59; author: dillon; state: Exp; lines: +2 -2
branches: 1.33.2;
In the 'found' case for ufs_lookup() the underlying bp's data was
being accessed after the bp had been releaed. A simple move of the
brelse() solves the problem.
Approved by: jkh
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
==
lukem