7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
c86b7572f9
Cosmetic change.
2000-02-25 00:23:57 +00:00
5ed29fa2d6
Delete a superfluous newline in attach message.
2000-02-24 03:42:44 +00:00
7f8cdf038f
Fix a missing closing parenthesis in an error diagnostic
2000-02-23 08:31:25 +00:00
d94804a788
Pccbb maintains the interrupt handlers for 16-bit PC Cards
...
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
347823e807
Include dev/isa/isavar.h so that this file compiles again.
2000-02-22 22:46:16 +00:00
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
b785bb47a0
Establish a powerhook and make sure the card detect interrupt is enabled
...
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp ) in PR#9463.
2000-02-22 02:35:26 +00:00
70bbb1b84e
Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
...
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
3a76270201
deal with a DELAY vs. delay issue
2000-02-20 22:19:29 +00:00
717d5b1cc3
Support for > 12 byte commands for parallel SCSI.
2000-02-19 01:54:42 +00:00
4331d2bcaa
Regen.
2000-02-16 04:29:32 +00:00
021ff75015
Add Toshiba ISA bridge.
2000-02-16 04:29:20 +00:00
6eba47aa8f
add (untested in NetBSD yet) Qlogic 12160 (Ultra3) suppot
2000-02-12 02:22:37 +00:00
f522d6f1ee
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 16:26:23 +00:00
b3cffb232f
regen
2000-02-08 16:24:00 +00:00
b614c6a569
Add US Robotics vendor ID, and USR 3CP5609 PCI 16550 Modem product ID.
...
From Kent Polk.
2000-02-08 16:22:37 +00:00
dbeafc9dbe
clean up some printfs
2000-02-06 08:14:13 +00:00
6d8c9583a7
indent this file
2000-02-05 18:42:37 +00:00
101848d272
run this through indent with some comment cleanup -- more knfing needed.
2000-02-05 18:20:08 +00:00
29be498635
Add a list of all the currently supported boards
2000-02-04 13:16:22 +00:00
cbacaf54d7
Add AdvanSys U2W (LVD) boards support
2000-02-03 20:28:26 +00:00
fd2fd888ef
Add AdvanSys U2W host adapters
2000-02-03 16:56:23 +00:00
787999d9e4
Add AdvanSys U2W boards
2000-02-03 16:51:42 +00:00
5b67628108
regen
2000-02-03 13:58:55 +00:00
1533d39d9e
2 Micro -> O2 Micro
2000-02-03 13:58:28 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
d8e72e215d
implement probing for available irqs on non-cirrus pcmcia controllers
...
including cardbus controllers running in pcic mode
2000-02-01 22:39:51 +00:00
547bd53f89
Add support for the SiS 7016.
2000-01-31 18:36:12 +00:00
f457f7c969
Regen.
2000-01-31 18:34:51 +00:00
a2efc77ee1
Add SiS 7016 10/100 Ethernet.
2000-01-31 18:34:19 +00:00
b1ec3fa901
Give the ISV filter a chance to verify 21143 pass 4.1 SROMs before running
...
them through the quirk table.
2000-01-26 16:51:11 +00:00
063cb5e5dc
Additional hackery for the Cobalt interfaces. Even though these are
...
pass 4.1 21143s, they have a 128-byte SROM, and thus use a different
SROM address size than all other pass 4.1 21143s.
A plea to hardware designers -- *please* read application notes for
the components you're using before putting your hardware together. Thanks.
2000-01-26 15:50:52 +00:00
639bd74d21
Pccbb manages interrupt handlers by itself for its child device.
2000-01-26 09:02:41 +00:00
4656f0ba52
Remove the FreeBSD support from this file. It hasn't worked in FreeBSD
...
for some time, and only made the code harder to read.
2000-01-26 06:41:11 +00:00
494b4a9ed3
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 06:27:32 +00:00
8949eab0cb
Split the code that reads the SEEPROM into its own file.
2000-01-26 06:04:37 +00:00
2bd8866643
"i/o" -> "memory"
2000-01-25 23:23:48 +00:00
7360584deb
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
(XXX is the hack still necessary?)
2000-01-25 22:31:06 +00:00
4f1e715248
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
2000-01-25 22:30:04 +00:00
6dc0e3435d
IFM_1000_FX -> IFM_1000_SX
2000-01-25 20:19:14 +00:00
02af3f45b6
Clean up the SROM addrbits code a little.
2000-01-25 19:53:34 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
492bfe70f3
get the device name from pcidevs instead of having a list here
2000-01-25 14:34:24 +00:00
73ce2abd33
Make sure PIRQD enable bit is set. From FreeBSD.
2000-01-25 11:26:06 +00:00
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
f18e32d670
Regen.
2000-01-25 09:06:50 +00:00
7b4d7aaba1
Add TI PCI 1451 PCI-CardBus bridge.
2000-01-25 09:04:03 +00:00
b50b01e020
Don't enable the interrupt until after we cycle the power, disable
...
interrupt at disable, and make this code look more like the std pcic
code. From Mycroft and I.
2000-01-25 06:16:34 +00:00
drochner