Commit Graph

78 Commits

Author SHA1 Message Date
soren d282f771e7 Remove redundant CIS definitions. 2000-02-18 18:55:31 +00:00
enami 01868857df Add activate routine and check device active flag also in one second
tick handler.
2000-02-12 04:05:49 +00:00
joda d40e2b51ee add detach code 2000-02-09 22:15:57 +00:00
itohy 0a1d6b1357 Make it compile with options DEBUG.
Reported by Kawamoto Yosihisa (PR #9379).
2000-02-09 07:57:52 +00:00
augustss 494c9affea Support detach. 2000-02-05 18:11:55 +00:00
augustss e037c568cb Update for cardbus unmap changes. 2000-02-04 13:48:23 +00:00
augustss 1facb42e6e Make the driver work even if DIAGNOSTIC is not set. 2000-02-04 13:43:56 +00:00
haya ded26ac3e4 Now cardbus_mapreg_unmap() has been implemented in
sys/dev/cardbus/cardbus_map.c.  The detech function in
sys/dev/cardbus/if_tlp_cardbus.c uses cardbus_mapreg_unmap().
2000-02-04 07:59:20 +00:00
thorpej 44a20a6c96 If we read a bad header signature, report what we read. 2000-02-03 06:47:31 +00:00
thorpej 001748dc57 First cut at detach support; doens't fully work yet. 2000-02-01 22:54:47 +00:00
haya 2e9b49c888 Force power off when a CardBus card is detached.
Use tsleep when kernel thread works.
2000-01-31 08:49:07 +00:00
haya 653eefc8f4 Add cardbus detach functionality. Add a function
cardbus_detach_card() in cardbus.c and enable detach code in cardslot.c
2000-01-26 09:04:59 +00:00
thorpej 422cc09430 First attempt at a CardBus front-end for the `ahc' driver. This will
support the Adaptec ADP-1480 CardBus SCSI cards, which are a stright
AIC-7860 implementation.
2000-01-26 06:37:23 +00:00
drochner 1f723151f2 use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
PCI BAR bit is referred to
2000-01-25 22:32:20 +00:00
thorpej 701cc4b663 Add support for the Xircom X3201-3 in 21143 emulation mode. This chip
appears on some Xircom and Intel RealPort(tm) cards.

From Rafal Boni, with some slight modifications from me.
2000-01-25 21:50:30 +00:00
thorpej 6aca67041c Add a chip type for the Xircom X3201-3, and centralize the declaration
of the chip names array.
2000-01-25 19:29:17 +00:00
mycroft e33c595472 Do a CARDBUS_BM_ENABLE just to be sure. 2000-01-25 15:29:43 +00:00
thorpej be3c43687c Make sure the latency timer is set to a reasonable value.
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2000-01-25 03:44:27 +00:00
thorpej 0c93dded4a Use config_pending. Addresses kern/9247. 2000-01-24 18:34:44 +00:00
joda de798768b3 (cardbus_attach_card): zero out ca 2000-01-13 10:27:31 +00:00
augustss 6b1620b095 Remove extra #endif so we can compile again. 1999-12-17 14:06:43 +00:00
abs 43838a47fd Add back cut Cardbus_conf_write/cardbus_conf_write lines. 1999-12-16 21:04:10 +00:00
kleink 2fd74b0fb4 Normalize symbol names used for multiple inclusion protection. 1999-12-15 12:28:54 +00:00
thorpej 014cd3fcc1 Take a stab at making this work on big-endian systems. 1999-12-12 17:46:36 +00:00
explorer 4313f463a0 add 3com 575CT, which Dell (at least) seems to be shipping 1999-12-11 22:22:34 +00:00
thorpej d4bb1032cb Handle the 21143 PMCSR, like we do in the PCI front-end. 1999-12-11 00:39:13 +00:00
thorpej caae0e1aa1 - Don't try to run the chip in big-endian mode. Not all chips support
this consistently, and it doesn't always work even when the chip
  supports it.
- Make sure things DMA'd to the chip that the chip interprets are in
  little-endian mode.
1999-12-11 00:32:59 +00:00
thorpej 085bc011ab Add cardbus_get_capability(), cloned from pci_get_capability(). 1999-12-11 00:29:11 +00:00
joda 9758d8ed66 check for NULL from malloc 1999-12-08 16:52:51 +00:00
thorpej 546480874c After reading the 21143 manual again, make sure SNOOZE is cleared in
the CFDA register, too.
1999-12-07 07:36:19 +00:00
thorpej 6e36651a27 Add the 21143 PMCSR offset, from Masanori Kanaoka. 1999-12-07 07:33:25 +00:00
thorpej 3d60aecdd7 Make sure to bring the chip out of sleep mode. From Masanori Kanaoka. 1999-12-07 07:11:49 +00:00
thorpej 0c3eefb6a5 Add a basic CardBus front-end for the `tlp' driver. Still more work to do. 1999-11-19 18:23:35 +00:00
joda b578473fae include dev/cardbus/cardbusdevs.h 1999-11-18 16:57:41 +00:00
joda 88d26dd881 regen 1999-11-18 16:03:43 +00:00
joda 08bc681319 fix bogus comment 1999-11-18 16:03:12 +00:00
joda 175087230a use CARDBUS_VENDOR_INVALID 1999-11-18 15:11:15 +00:00
joda 8c62b47d9f regen 1999-11-18 15:09:59 +00:00
joda 40f1a07541 add INVALID vendor, and an Intel modem 1999-11-18 15:09:30 +00:00
thorpej ce25407921 Make this a lot more like the PCI front-end. 1999-11-17 08:49:16 +00:00
soren f361f1b1b8 Also disable EX_CONF_INTPHY on the B model. 1999-11-17 08:42:06 +00:00
thorpej e1a760a4a7 The 3c575-TX does *not* have an internal PHY. 1999-11-17 07:59:57 +00:00
haya 3be097c31d Handle insertion and removal events more strictly. 1999-11-15 06:08:02 +00:00
haya 89d0a53e2c Fill 0 into CardBus base address registers before a card is
configured.
1999-11-15 06:01:11 +00:00
joda f9bf746086 (cardbus_attach_card): don't free cc 1999-11-12 18:18:38 +00:00
joda 4278cf451e if the image size is zero, assume it really means one block 1999-11-12 18:17:36 +00:00
joda c7cca9cd39 make this compile with CARDBUS_DEBUG 1999-11-09 15:03:59 +00:00
haya e54d837b8b Maintenance CardBus/PCI extension ROM mapping routine.
1. Make Extension ROM not to be mapped on I/O space.
2. Do not check the bus-space indicator in ROM register.
1999-11-09 09:20:30 +00:00
joda 1b686307cb correct number of BAR:s in cardbus_cis_info 1999-11-08 20:21:24 +00:00
joda fe2d79ec9a Let decode_tuples take function to call for each tuple, and use this
to get some vital information from the CIS (some network cards need
this to get the mac-address). This should be merged with the related
code for PCMCIA cards, but that requires more thought.
1999-11-08 20:19:10 +00:00