7c5c9764b5
turn off ttyE[123] by default -- default installs don't configure them.
1999-05-01 00:23:27 +00:00
56d7789c45
New systems should NOT ship with /usr/pkg/lib or /usr/X11R6/lib in
...
ld.so.conf. (Frankly, new systems shouldn't ship with a ld.so.conf.) We
use rpath for that purpose now. Unfortunately, 1.4 won't have this
change, so it will be in 1.4.1.
1999-05-01 00:06:20 +00:00
7552438f3f
Add the tty device-nodes on the install floppy. You'll need them for
...
slip connections.
1999-04-30 19:05:47 +00:00
9c072e268f
make -s flags for syslogd and lpd the default
1999-04-29 18:26:43 +00:00
bc05796ee2
Set console and ttyE? term types to vt100.
1999-04-29 01:26:15 +00:00
5e40cf296d
Move the knowledge that /usr and /var should be mounted early from
...
rc.subr to the default rc.conf.
While this is no longer necessary to supress noise,
it increases the clarity of the situation and removes
one more bit of what should be adjustable configuration
from scripts that site admins shouldn't have to edit.
Addresses PRs misc/7406 and (partially) bin/7491.
1999-04-28 23:32:29 +00:00
bdd6ce47a7
Greatly simplify by doing the moral equivalent of
...
cd ../distrib/pmax && make install
1999-04-27 12:32:08 +00:00
31aebad029
+ Build (but don't install) INSTALL and RAMDISK kernels.
...
+ Make installation/diskimage installation/netboot in ${RELEASEDIR}
+ snap_md_post depends on the diskimage, the diskimage tar file and
the install kernel, and installs these into the right places in
${RELEASEDIR}.
1999-04-27 04:36:25 +00:00
ae25beb28c
+ Put directories to create in ${RELEASEDIR} into a variable that
...
port-specific Makefiles can add to.
+ Separate snap_md into snap_md_pre and snap_md_post that are depended
on before and after snap_kern.
+ Build all kernels listing in ${BUILD_KERNELS}, but don't put them in
${RELEASEDIR}.
1999-04-27 03:08:02 +00:00
eebf5c0180
Add code for creating pxN. px{0-2} are created as part of std.
1999-04-26 04:46:46 +00:00
adb6375b6b
Add a 'ramdisk' target, and create ptys on both ramdisk and floppy
...
(Needed for sysinst).
1999-04-26 04:20:04 +00:00
51a0d74d06
fixed syntax for using an nfs mounted mfs partition
1999-04-24 19:57:11 +00:00
9e14da1db9
change default console terminal type to "unknown" instead of "dumb"
1999-04-24 19:20:46 +00:00
018f256ee3
Added example mfs /tmp in fstab
...
Added wscons entries in ttys, but leave default "console" enabled
since some hardware still uses the serial port console
1999-04-24 19:19:48 +00:00
1c98ea4e2a
+ttyEcfg
1999-04-23 18:45:50 +00:00
5a6330ac23
typo
1999-04-23 18:14:29 +00:00
357a0baaf8
Get rid of old-style chown operands.
1999-04-23 08:20:28 +00:00
11f13fe80d
Remove comment about critfs_requires_network, which has gone away
1999-04-21 21:58:29 +00:00
3cc8bf22d2
Configure wscons much earlier so that a virtual console can e.g. be
...
used for "syslogd" output.
1999-04-13 07:40:53 +00:00
ff5615a44f
build ipfilter devices by default.
1999-04-13 06:45:36 +00:00
1a3bfc2c1b
When checking local status, jJust ignore not-found filesystems, rather
...
than printing an error, just as we do when we try to mount it.
1999-04-13 02:15:49 +00:00
31f06c6bd1
OK, adjust the kernel finder one more time to handle the case of a config
...
file that just does "include" GENERIC, and therefore has no "config" line.
It's simplest to assume that "netbsd" will be the result in that case.
Rather than duplicate config(8)'s parser in awk (or something), we should
adjust config to parse the config file and spit out the kernel names, and
then use that to replace this awk script thing.
1999-04-10 04:41:52 +00:00
193be65e25
under "minimal" correct a tyop: wsbkd0 -> wskbd0
1999-04-09 22:22:17 +00:00
0a40032913
Turn on building of A7000 CATS EBSA285 RISCPC SHARK kernels for releases.
1999-04-09 21:29:21 +00:00
e6bc2dc3c6
Add a note about critfs_requires_network on dhclient line.
1999-04-09 15:18:51 +00:00
6b39fd9da6
add a comment explaining how "pcvt" fonts can be used
1999-04-08 10:58:36 +00:00
d023c654fd
Slight tweak to the EXTRA_KERNELS build commands to work around a shell
...
parsing wierdness.
1999-04-08 08:24:44 +00:00
a6a272d18a
Add "_crunch" section required by catman to crunch compressed cat pages.
1999-04-04 11:02:09 +00:00
0d59551634
Avoid using id(1), as this loses when /usr isn't mounted.
1999-04-04 09:58:57 +00:00
5048fc1b17
NetBSD's very clever kernel build system can make more than one
...
kernel per config file and the resulting kernel need not be named
"netbsd"; therefore paw through the config file after the kernel
builds are done, find them all, and put them where they belong per
release(7). This all done with some clever awk/sh scripting, from
PR 7180 by David Forbes.
1999-04-04 09:57:11 +00:00
2f7a39463f
Create /var/log/aculog with appropriate permissions, per PR 6675
1999-04-03 09:40:38 +00:00
252a967372
Change to make ownership of /var/msgs "daemon" per PR 6672
1999-04-03 09:36:04 +00:00
668efbbcec
Change mount_critical_filesystems() so that if given an argument
...
of "local" it will not mount filesystem types it identifies as
network file systems (currently just nfs). Call the function twice,
before networking starts with arg "local", after networking starts
with arg "network". Remove critfs_require_network as is now redundant.
1999-04-01 03:58:44 +00:00
b779dad4d4
Add hup, ll and x shell functions similar to the aliases in dot.cshrc
...
plus set the prompt. Tested with /bin/sh and /bin/ksh.
1999-03-30 02:36:05 +00:00
7824e2333c
NO_POSTFIX should have been BUILD_POSTFIX with reversed sense.
1999-03-29 16:40:44 +00:00
e8d9f12b08
Add a NO_POSTFIX check to allow \'make distribution\' to work.
1999-03-28 21:31:11 +00:00
3018f8d67b
postfix support.
1999-03-27 05:17:08 +00:00
b4bf620b49
add postfix
1999-03-27 05:13:55 +00:00
4fc0cc79b3
If we have an 'operator' user, it should at least be gid operator.
1999-03-27 03:51:41 +00:00
e75fc73f95
add postfix uid/gid, maildrop gid
1999-03-27 01:44:37 +00:00
4603b8460d
start xdm after wscons configuration - the X server might want an own
...
virtual screen
1999-03-26 13:45:47 +00:00
5a90dbf495
Add dhcrelay startup (allow only if dhcpd isn't started)
1999-03-26 13:10:17 +00:00
3423145ca4
Add md0 to the raminst target.
1999-03-26 08:45:25 +00:00
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
9fe0d93bdb
Nuke the line 'raidctl -r raid$dev'. a) The '-r' option is now '-i', and
...
b) with component labels and clean-bits working, this shouldn't be
required at all on each boot! Thanks to Andrew Gillham for pointing this out.
1999-03-26 01:11:45 +00:00
29fbd4fd08
change user `nobody's group from 9999 (non-existant) to 39 (group `nobody').
...
from Soren S. Jorvang <soren@t.dk> in [misc/6806]
1999-03-25 07:00:43 +00:00
cb9aa929b6
add ttyEcfg
1999-03-24 23:46:37 +00:00
d8f89f1b7b
install wscons.conf
1999-03-24 20:12:21 +00:00
61b6b3bfec
- Support dhclient and dhclient_flags rc.conf variables.
...
- Start dhcp client if dhclient==YES.
1999-03-24 19:03:10 +00:00
8572695519
- Move critical filesystem mounting code into a shell function and put
...
that in rc.subr.
- Support critfs_require_network rc.conf variable.
1999-03-24 18:59:47 +00:00
perry