79c6c8ec3f
Make this compile again after const-ification.
2001-01-19 04:01:10 +00:00
c423d2c0f9
Add support for another PCMCIA ISDN card: Sedlbauer speed star II.
...
While there fix two outdated comments.
2001-01-18 22:13:59 +00:00
34c8ae80da
constify
2001-01-18 20:28:15 +00:00
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
62fde088a1
adapt to pci_knowndevs[] being const, make local constant arrays const
2001-01-18 13:12:13 +00:00
4ad663531b
regen: make pci_knowndevs[] const
2001-01-18 13:11:22 +00:00
771d1f2f35
make pci_knowndevs[] const
2001-01-18 13:03:22 +00:00
aa204493b9
Regen; Intel Gigabit Ethernet update.
2001-01-17 20:56:47 +00:00
29002abf43
Update the Intel Gigabit Ethernet entries.
2001-01-17 20:55:47 +00:00
3d0bbf9152
Filter "receive process failed to idle" on noisy chips (like the
...
ADMtek AN985).
2001-01-17 19:37:09 +00:00
193fd06950
Fix comment.
2001-01-17 08:37:09 +00:00
1d8bb9f134
managed to make this useful enough for screen editor.
...
- video base register value brings different scanline starting address
of framebuffer depending on VRAM chip column size.
many other issues left unsolved.
- text rendered in incorrect colours.
- acceleration codes should be reimplemented from scratch.
2001-01-17 06:48:09 +00:00
fc5dafc79b
Fix a rather annoying problem where the sockaddr_dl which holds
...
the link level name for the interface (ifp->if_sadl) is allocated
before ifp->if_addrlen is initialized, which could lead to allocating
too little space for the link level address.
Do this by splitting allocation of the link level name out of
if_attach() and into if_alloc_sadl(), which is normally called
by functions like ether_ifattach(). Network interfaces which
don't have a link-specific attach routine must call if_alloc_sadl()
themselves (example: gif).
Link level names are freed by if_free_sadl(), which can be called
from e.g. ether_ifdetach(). Drivers never need call if_free_sadl()
themselves as if_detach() will do it if it is not already done.
While here, add the ability to pass an AF_LINK address to
SIOCSIFADDR in ether_ioctl() (this is what caused me to notice
the problem that the above fixes).
2001-01-17 00:30:49 +00:00
d418f0d68c
Add support for AN985-based CardBus network interfaces.
...
From Masanori Kanaoka <kanaoka@ann.hi-ho.ne.jp>.
2001-01-16 18:55:00 +00:00
23ded7f4c2
Regen; ACCTON and AboCom AN985 Ethernet devices.
2001-01-16 18:43:19 +00:00
cb7242ca2f
Add some ACCTON and AboCom AN985 Ethernet devices.
2001-01-16 18:42:56 +00:00
2663816278
Fix register offset botch when setting the multicast filter on
...
the ADMtek AN985.
2001-01-16 17:33:24 +00:00
58acc910af
regen
2001-01-16 15:57:54 +00:00
417efc284d
Add Roland SCP-55
2001-01-16 15:56:48 +00:00
1d25789f34
Update with recent files.
2001-01-16 11:54:13 +00:00
f20b78bb5d
Add a definition for PMAGD which should cover all (three?) variations of
...
it. Left commented out until DECstation switchs to WSCONS.
2001-01-16 05:49:41 +00:00
bd7039cbdb
- relocate the code to place sprite cursor inside interrupt handlers
...
called on every virtical replace.
- efforts to make the code strucutures similar across TC framebuffers.
2001-01-16 05:32:16 +00:00
f493d886c1
- make this more senseful 32bpp TC framebuffer. This is far less broken
...
than the preivous code. It can show readable characters on screen.
Tested only with 32bpp model of PMAGD opion card. Need more work for 8bpp.
- 2D accelleration will be revamped to ultilize SFBplus features.
- there seems much mulfunctionness in 32bpp codes of /sys/dev/rasops/.
Need to rectify every corners.
2001-01-16 05:06:02 +00:00
6fe782cff1
Use the real Y@P firmware. Permission granted by Kamal Parmar,
...
<kamal@siliconportals.com>, at Silicon Portals.
A big thanks to Silicon Portals for being cooperative (unlike many USB
device vendors).
2001-01-16 03:10:09 +00:00
058f408c59
Regen.
2001-01-15 23:29:28 +00:00
a1df526434
Add the 66MHz version of the Symbios 53c1010.
2001-01-15 23:29:04 +00:00
674a20f8fb
powerhook fixes, from thorpej, tested by me. Thinkpad T20 sound now perfect.
2001-01-15 23:25:39 +00:00
3bb7b7df87
Fixes from OpenBSD via chopps. Audio now works on my Thinkpad T20
...
provided I don't suspend the thing...
2001-01-15 22:28:20 +00:00
a8d16ea901
Move decl out of __HAVE_OLD_DISKLABEL
2001-01-15 21:29:30 +00:00
4d7a6c1fda
Move declaration out of __HAVE_OLD_DISKLABEL ifdef.
2001-01-15 21:27:21 +00:00
2ed1e48455
List two USB MIDI I/Fs; YAMAHA UX256 and Roland UM-1.
...
These devices, however, aren't conforming to USB-MIDI class spec.
BTW, here is very experimental version of the driver for these devices:
http://www.imou.to/~AoiMoe/UNIX-at-Random/garbage/umidi-2001-01-15.diff.gz
2001-01-15 20:26:46 +00:00
9b47b68152
abandon an attempt to have 8bpp textop and 32bpp textop parallelly.
...
Pursuade a unified logic effective for both depths.
2001-01-15 09:45:30 +00:00
452e3d1a2f
fix a typo and rearrange a comment about SFB register aliasing effect.
2001-01-15 09:41:57 +00:00
3a6d3e0771
use ri_devcmap[] values directly, instead of calling rasops_unpack_attr().
...
-
2001-01-15 09:37:42 +00:00
845a2d5b53
Fix comment typo.
2001-01-15 03:52:03 +00:00
45de366b2e
Rename __GENERIC_SOFT_INTERRUPTS to __HAVE_GENERIC_SOFT_INTERRUPTS,
...
and place the definition in <machine/types.h>. This can now be used
as a flag to indicate whether or not <machine/intr.h> can be included
to get the generic soft interrupt API.
2001-01-14 23:50:28 +00:00
4d81dcf9c1
splimp() -> splvm()
2001-01-14 21:28:16 +00:00
372338915a
Use splnet() to block network interrupts, not splimp().
2001-01-14 17:37:41 +00:00
bf4e834543
ELSA XI-300 WaveLanCard (PRISM2) work.
...
OEM. ADLINK 330C
http://www.adtec.co.jp/CGI/parts/parts_detail.cgi?product_id=ADLINK330C
2001-01-14 06:54:01 +00:00
cfb6a0b2c6
add missing sc->dying initializer at midiattach.
2001-01-13 16:16:12 +00:00
3a10cc3d0a
add detaching/deactivation code to midi driver.
2001-01-13 16:09:04 +00:00
dd7e31f012
The mask tables have no excuse for being in the data segment.
2001-01-12 23:03:52 +00:00
bc9dd935cf
Fix bug which affects pciide controllers in native mode (found by
...
Paul Kranenburg, many thanks !): the control register I/O is 4 byte long
although only one is used, but the control register is at offset 2, and not
0 as expected by IC code. Use bus_space_subregion() to get a handle which
points to the control register, and is one byte long.
2001-01-12 16:03:59 +00:00
12a14b346e
match T1 card. from freebsd driver, it should just work.
...
i'll test it as soon as i get the card handy.
2001-01-12 05:19:18 +00:00
78fdca968e
regen
2001-01-12 05:14:36 +00:00
c1285a8caf
add product ID for LMC T1 card. from freebsd.
2001-01-12 05:13:47 +00:00
e94e4a6d47
Move interrupt mapping before initialization of the card (which might
...
cause interrupts). This works around a problem on sparc64, where
interrupts without installed handler seem to cause heavy lossage (and
interrupts are already enabled at this stage of autoconfiguration).
2001-01-11 22:46:40 +00:00
8fcc8721da
Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes.
2001-01-11 20:35:02 +00:00
0d99070cf2
Change wi(4)'s default from ad-hoc mode to BSS mode. Also
...
some minor manpage fixes.
2001-01-11 19:33:51 +00:00
4f8dfdb556
Don't copy Rx packet to mbuf if it has invalid length; just discard it.
...
Fixes kern/11877.
2001-01-11 14:38:58 +00:00
366e0029a8
Ad ezload attribute for EZ-USB firmware loader.
2001-01-11 13:14:08 +00:00
3a755611ac
about WI_TIMEOUT:
...
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
2001-01-11 11:54:21 +00:00
a86eb3e683
NANOSPEED ROOT-RZ2000 WLAN Card work.
...
(PRISM II)
2001-01-11 11:37:54 +00:00
c8cf783ce8
regen
2001-01-11 11:33:19 +00:00
b7cad127b5
add product
...
NANOSPEED ROOT-RZ2000 WLAN Card
2001-01-11 11:32:56 +00:00
35e36fee18
Add USSCANNER_DEBUG
2001-01-11 06:33:51 +00:00
d03f7a8f4b
Mention that I found protocol info in the Linux driver.
2001-01-11 06:33:22 +00:00
7d90b0cb9c
Note that I got information about the protocol from the Linux driver.
2001-01-11 06:20:04 +00:00
4dc9c52505
Add usscanner and uyap.
2001-01-11 06:01:18 +00:00
8765aa2c42
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol.
...
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 06:00:31 +00:00
35b9cac9d5
regen.
2001-01-10 23:48:54 +00:00
263cb744f8
add EMTAC A2424i 11Mbps WLAN Card
2001-01-10 23:47:56 +00:00
8c2f65891f
Prefer memory mapping over io mapping for this card too,
...
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
2001-01-10 21:41:36 +00:00
a42939d604
Make the driver try mapping memory first, the try io.
2001-01-10 20:31:49 +00:00
fc0f2f8909
Added four config entries for the DLink DE-650CT.
...
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
around 0x300 or we'll end up with a lot of quirks for NE2k based
cards which have bad CIS's.
2001-01-10 17:37:27 +00:00
6b133efd3e
Make this work with the SA 431 and 42xx series controllers.
2001-01-10 16:48:04 +00:00
3ba997a164
Add the 53c1510d and 53c895a. 1510d confirmed working by
...
Mark Davies <mark@MCS.VUW.AC.NZ>.
2001-01-10 15:50:20 +00:00
6c3ff254ea
Get rid of (unintentionally added) ^M.
2001-01-10 14:58:08 +00:00
234840a1ae
Initialize the FBC mode register in cg6attach().
...
Values are taken from sunGX.[ch] in xsrc.
Now RASTERCONSOLE works properly on my SS1+ with old 2-slot sbus cg6.
2001-01-10 13:26:52 +00:00
3d5c5173f5
Add a quirk table for specific implementations.
...
Change the NEC-specific subvendor test for GPIO initialization into a more
generic quirk table flag.
Add a quirk flag for hardware that has left and right channels reversed
(currently the COMPAL 38W2 a.k.a. Dell Inspiron 5000e)
Clean up PCM channel initialization and add channel swapping option.
2001-01-09 23:27:07 +00:00
6ec1759deb
regen
2001-01-09 23:20:22 +00:00
ca3478d0e2
Add COMPAL vendor and COMPAL 38W2 product (OEM for Dell Inspiron 5000e)
2001-01-09 23:19:03 +00:00
d11cfe3c79
Regen; added Symbios 53c1510D.
2001-01-09 23:16:18 +00:00
ff00b6c009
Add Symbios 53c1510D.
2001-01-09 23:15:39 +00:00
cb2d30303b
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right
...
mixer channels to be swapped (required for hardware that has wiring
reversed).
2001-01-09 23:14:25 +00:00
ba45ad64d3
Ifdef some routines only needed for ELSA Quickstep cards when compiling
...
without support for those.
2001-01-09 21:26:30 +00:00
442e2e73a9
ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT.
2001-01-09 18:56:24 +00:00
64c3b7f881
Add some 2X00 specific state flags for status response entries. Add the
...
defines necessary for the REGISTER FC4 TYPE SNS subcommand.
2001-01-09 18:56:06 +00:00
5599d31360
ISPASYNC_PDB_CHANGED->ISPASYNC_LOGGED_INOUT. And also, ISPASYNC_CHANGE_NOTIFY
...
is for both local loop and fabric cases now.
2001-01-09 18:54:53 +00:00
81df08ddef
Use a SNS REGISTER FC4 TYPE subcommand to register with the name server.
...
This means we should be able to work with McData switches now. Change
ISPASYNC_PDB_CHANGED to ISPASYNC_LOGGED_INOUT (more descriptive). Allow
F-Port topologies to use target ids 0..125 to log into fabric devices.
Yet again fool around with defaul WWN stuff.
2001-01-09 18:54:06 +00:00
1b4eef2721
- Make VDAC state per-board.
...
- Add an ioctl to reset the STIC.
- Add an ioctl to restore the screen contents from backing.
- Other tweaks.
2001-01-09 16:04:03 +00:00
0ed2fcf9fb
*minor* knf
2001-01-09 06:36:13 +00:00
ac6176f581
Fix some oversights from fixing option names.
2001-01-09 00:46:01 +00:00
7bebf9a408
On ADMtek chips, don't just idle the chip when programming the
...
multicast filter. These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
2001-01-08 22:12:57 +00:00
d101f6f462
Add Accton EN2242 10/100 MiniPCI Ethernet.
2001-01-08 21:50:47 +00:00
2482ba1fab
Regen; added Accton EN2242.
2001-01-08 21:47:38 +00:00
3628087824
Add product ID for the Accton EN2242 10/100 Ethernet (an ADMtek AN985).
2001-01-08 21:47:10 +00:00
666e82a4e9
Use the AN985 media switch on the AN985.
2001-01-08 21:45:42 +00:00
e9bb880aaf
The ADMtek AN985 "ghosts" the single built-in PHY at every MII address.
...
Work around this by having a custom media init routine that limits the
search to MII address 1.
2001-01-08 21:40:29 +00:00
f9c77ef635
Only build "esm" if it's included in the kernel config file.
2001-01-08 21:16:26 +00:00
e6616f532a
Cosmetic changes.
2001-01-08 20:21:16 +00:00
2b00271327
Regen; added DEC SWXCR RAID.
2001-01-08 20:08:17 +00:00
18b051656b
Add product ID for DEC SWXCR RAID (a Mylex v5 controller).
2001-01-08 20:07:21 +00:00
a3aa8d5abc
Add esm audio driver.
2001-01-08 19:55:51 +00:00
ca3b496216
Initial import of the Maestro 2/2e 'esm' PCI audio driver. This driver
...
is based on the FreeBSD 'maestro' driver by Taku YAMAMOTO
<taku@cent.saitama-u.ac.jp>
2001-01-08 19:54:31 +00:00
757dca55b7
These ioctl commands should be '_IOW' to set value.
...
WSMOUSEIO_SRES
WSMOUSEIO_SSCALE
WSMOUSEIO_SRATE
2001-01-08 11:20:24 +00:00
21ea7bd559
regen
2001-01-08 09:53:08 +00:00
48276d65d9
Add IDs for the NEC Versa LX and Versa Pro LX
2001-01-08 09:52:22 +00:00
9bbe5b85ca
"lp" must be defined reagardless from __HAVE_OLD_DISKLABEL
2001-01-08 06:57:21 +00:00
d040bd5908
Return error in the case of using ODIOCGDINFO or ODIOCGDEFLABEL when
...
the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
2001-01-08 02:03:45 +00:00
b79ddef845
Also ignore receiver errors if VLAN_MTU is enabled; the 21040 appears
...
to require this.
2001-01-07 23:29:12 +00:00
6b82e7fe42
64bit police.
...
Rumors say there are archs without ISA busses, so avoid including
(uneccesarily) isa bus headers in MI files.
XXX this is the minimal solution, layer interface calls will have
XXX to be revisited later
2001-01-07 21:47:24 +00:00
4522010c18
Make certain we see COM_MPLOCK, MULTIPROCESSOR, and LOCKDEBUG
...
to avoid any confusion about whether or not we have a lock in the softc.
2001-01-07 18:09:26 +00:00
e2d1c1f926
Adapt all disk devices in MI directories to handle ODIOC* calls
...
for ports that have bumped MAXPARTITIONS (and thus define
__HAVE_OLD_DISKLABEL).
2001-01-07 18:09:01 +00:00
6861904096
Regen.
2001-01-07 15:01:06 +00:00
55c57a573f
Add an Altima PHY.
2001-01-07 15:00:46 +00:00
e90b26477e
Regen.
2001-01-07 14:47:00 +00:00
6d5a1918f8
Add Epson 1640 scanner. (From FreeBSD)
2001-01-07 14:46:31 +00:00
5b6d98341e
Try both the old (wrong) and new SOFT_RESET request type.
2001-01-07 14:26:19 +00:00
218d552c4c
Note ISDN devices.
2001-01-07 13:10:54 +00:00
c5802f9f90
avoid unused variables if not RASTERCONSOLE
2001-01-07 05:41:50 +00:00
46b2a2fcd4
Do ess_config_addr() in the ofisa front end, rather than in the match
...
routine. Prevents problems with non-SCR ess chips, as described in
PR 11630.
2001-01-06 22:50:00 +00:00
a30debae05
Add description of the pinout of a standard DB-25 parallel port,
...
relative to the bits described here.
2001-01-06 17:16:19 +00:00
1c518d67a0
Add WDC_CAPABILITY_SINGLE_DRIVE to ignore secound drive. Wdc on pcmcia will
...
be attached with this flag.
Some CF Card (for ex. IBM MicroDrive and SanDisk) doesn't seem to implement
drive select command. In this case, you can't eliminate ghost drive properly.
So you should use this flag to ignore the ghost by force.
2001-01-06 14:55:49 +00:00
94094c44ab
Change debugging output a little.
...
Don't the for the wrong id when UMASS_DEBUG is set.
2001-01-06 12:14:39 +00:00
f6f8ab2d11
Don't #define UAUDIO_DEBUG here.
2001-01-06 12:12:24 +00:00
4c176b9806
Disable the daic directory for now, it breaks with OBJDIR builds.
...
This needs more thought.
2001-01-05 23:17:48 +00:00
6d92451397
don't keep adding targets, but include bsd.kinc.mk... This time make obj borke.
2001-01-05 20:18:10 +00:00
34875ea7b1
Now let it survive "make install" too.
2001-01-05 19:56:55 +00:00
651aeb5899
don't let "make all" fail
2001-01-05 19:01:02 +00:00
69153b6b36
Run at Ultra/66 on VIA controllers that can do it. PCI vendor/device/revision
...
is the same for the Ultra/33 and Ultra/66 version, so test writability of
the U66 enable bit (idea from Chris Cappuccio).
Thanks to David Carrel for testings.
2001-01-05 18:04:42 +00:00
cbf42ca2d1
Ops, make it compile again.
2001-01-05 15:34:05 +00:00
5c800a0dab
Add support for Ultra/100 on intel ICH2; from Tomokazu HARADA in kern/11747.
2001-01-05 15:29:39 +00:00
2a63f0a46c
Add support for Ultra/100 on the HPT370
...
XXX the datasheet for the HPT370 is wrong
While I'm there clear the DRIVE_DMA flag when we're going to use Ultra/DMA
where it was missed, so that wdc_print_modes() only prints what's used.
2001-01-05 15:20:53 +00:00
242656c78a
Enable the imported ISDN4BSD based ISDN subsystem.
...
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/ .
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
2001-01-05 13:09:15 +00:00
c3cb638bca
Initial import of ISDN4BSD release 0.96
2001-01-05 12:49:52 +00:00
6cb4620b76
(some of these changes were made in the previous revision- oops)
...
Say which mailbox command times out (polled or interrupting). Also,
give them a bit more time to timeout (5 seconds instead of 2).
2001-01-05 07:03:54 +00:00
9d7f6e219f
Ian McDonnell <apriori@world.std.com> made me see the error of my ways.
...
*Cough*. Ahem. I hadn't been setting error to XS_SENSE when there was
a check condition. Major blunder.
2001-01-05 07:02:00 +00:00
49f333783f
Don't make local defines for stuff that's already in ac97reg.h.
2001-01-05 03:33:39 +00:00
5f3c3e0d6f
Add definitions for some bits in ID and STATUS regs.
2001-01-05 03:32:46 +00:00
cc9f003455
Add some codecs.
2001-01-05 03:32:11 +00:00
4dc117d433
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed.
...
Thanks to Bernd Ernesti for pointing this out.
2001-01-04 11:34:27 +00:00
3e63d458f0
Use COM_FREQ for COM part of the last commited entry.
...
Why are there other drivers here which have PUC_PORT_TYPE_COM but don't
use COM_FREQ or even don't have the extra field?
2001-01-04 08:49:31 +00:00
17718db1b9
Add support for boards with an Oxford Semiconductor chip.
...
This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and
1 parallel ports.
XXX We need to move the PCI IDs to pcidevs.
2001-01-04 08:43:21 +00:00
f73703a4a6
Set the play and record parameters separately.
...
If the device is unidirectional, just ignore parameters in the other direction.
(XXX We need a better way of dealing with this.)
Only set curaltidx if we're setting usemode.
This makes both the Altec Lansing speaker set and the Telex bidirectional frob
work again.
2001-01-04 07:05:00 +00:00
c142ce184b
Several things:
...
* Only match an alternate which is in the same direction.
* Use 16-bit ulaw and alaw conversions for output, if possible.
* Store the interface handle in the `alternate' table, so we use the right
interface when creating pipes for devices with both play and record.
Record doesn't seem to actually return any data from the Telex frob, but at
least it doesn't crash or return EIO now.
XXXXXXXX
This is a big f*cking hack. Play and record need to be separated completely
if this code is ever going to even pretend to support full duplex.
2001-01-04 06:20:49 +00:00
6ff81e44ec
No really, this is half-duplex for now. Lame.
2001-01-04 05:25:24 +00:00
ab1d9b87b0
Make some vague attempt to handle devices that do both input and output. This
...
probably needs more work, but at least my Telex frob can play music now.
Also, AUDIO_DEBUG -> UAUDIO_DEBUG.
2001-01-04 03:53:09 +00:00
25481ad786
Redo previous; we need to notify kbd driver.
2001-01-04 01:33:37 +00:00
29ecdf4b0c
Regen.
2001-01-03 23:15:14 +00:00
cbfa3ad17d
Add Chrysalis-ITS LunaVPN card.
2001-01-03 23:14:39 +00:00
62a4aefda9
Avoid null pointer dereference so that boot -d works again.
2001-01-03 23:03:45 +00:00
7eab063a4f
Use device_lookup.
2001-01-03 23:00:24 +00:00
a06fc2bf4b
Fix thinko in previous.
2001-01-03 21:17:05 +00:00
5fcbd5f722
- Fix a number of bugs with the configuration stuff.
...
- Bash the passthrough interface into working order.
- Add an ioctl to retrieve the `tidmap'.
2001-01-03 21:04:01 +00:00
8494f44b67
Make dumps work, and put the first part of detach into ld.c.
2001-01-03 21:01:28 +00:00
286f4f934f
Add a 'flag' member to struct puc_attach_args and struct port. For
...
PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits
to 0, used for real flags if needed).
Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM.
Add support for the VScom PCI-800H 8 port serial adapter (which uses
a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :)
XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800
entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 15:13:15 +00:00
c2b9d052ba
Cosmetics.
2001-01-02 23:08:54 +00:00
3ea054452a
Add placeholder for firmware.
2001-01-02 22:38:51 +00:00
0e9ef4adc0
Forgotten commit for EZ-USB loader.
2001-01-02 22:24:00 +00:00
32e4d7004e
Add a transient driver for the YAP phone that downloads firmware into
...
the EZ-USB chip. After downloading the firmware the device detaches
and then reattaches as a composite device (audio + HID).
XXX For now there is no firmware committed since the vendor (Silicon
XXX Portals) has not yet agreed that we can redistribute their firmware.
2001-01-02 18:52:44 +00:00
5b86e8bfa8
Add subroutines to download firmware into Cypress (formerly Anchor)
...
EZ-USB chips.
2001-01-02 18:49:56 +00:00
f586756bcf
Regen.
2001-01-02 09:53:16 +00:00
d3fd188459
Add a new TI hub chip.
2001-01-02 09:52:55 +00:00
d9a9b8d6d5
the tcds cards work in pmaxen. move tcds attachment to files.tc. leave asc
...
at tcds in files.alpha for now, and add a new `xasc at tcds' to files.pmax.
after pmax has moved fully to MI scsi (and `asc' is MI scsi), we should move
the device asc, etc., lines to files.tc.
2001-01-01 23:43:05 +00:00
c29358e0f9
Don't try to configure `uninteresting' devices.
2001-01-01 19:03:30 +00:00
8afb11bb20
Don't match on a bunch of scanners that should be handled by a
...
different driver.
2001-01-01 18:52:05 +00:00
47c95db1c3
Regen.
2001-01-01 18:51:08 +00:00
f33102e85d
Add another scanner.
2001-01-01 18:50:42 +00:00
5806434428
Call vdevgone() with correct minor range.
2001-01-01 18:34:12 +00:00
2f1e60b46c
Support device detach.
...
Don't call scanjet_attach() for all HP scanners.
Also, ANSIfy while I'm here.
2001-01-01 18:28:49 +00:00
2f5cf27275
PR 6402: some SCSI devices use \377 as blank, so adjust scsipi_strvis().
2000-12-31 17:54:29 +00:00
9a52f80f0f
Make the controller survive suspend/resume. Thanks to Steve Woodford
...
<steve@mctavish.co.uk> for testing.
2000-12-31 14:29:54 +00:00
196d40d973
Regen.
2000-12-31 14:04:26 +00:00
fb04e415dd
Fix Mylex products.
2000-12-31 14:03:24 +00:00
9bbf84e4ca
Changes for dzkbd/dzms. This is not yet finished, but at least the
...
kernel is useable.
2000-12-30 22:11:46 +00:00
462ff196a4
[ dummy checkin to add to previous CVS ]
...
It's probably not really a compiler bug- somebody pointed out
that it was the kernel making strings readonly. But I do think it's
a bug. The actual code was really more like:
char *revname;
...
revname = "2X00";
...
revname[1] = '2'; <<<<<<<<< BOOOM
The variable revname is not a const. If I had said
const char *revname = "2X00"
...
revname[1] = '2';
that would indeed be breaking const rules.
2000-12-30 19:47:20 +00:00
8adadc9bda
There's a compiler bug for sparc64 that makes the construct:
...
char *foo = "XXXX";
...
foo[1] = 'Y';
blow up (in the kernel) with the 2nd assignment. Work around it here-
it's probably just as well- I was spending more in cpu instructions doing
the assignment than I was saving in string space (it would have been
cheap on a pdp11 or a 68k- but the address loads and assignments on something
like sparc or alpha way outweigh the savings in space. Tsk.).
2000-12-30 19:30:09 +00:00
1a40e855c8
Undo pci_intr_map change in non-NetBSD part of the file.
2000-12-30 17:02:53 +00:00
1796fa4bd8
Fix pasto in comment.
2000-12-30 16:55:24 +00:00
2ad3fd958d
Merge 2.18 to trunk.
2000-12-30 16:52:36 +00:00
c6b9ad5aeb
Use bootverbose to now set whether or not we add
...
ISP_LOGCONFIG and ISP_LOGINFO messages into the
default logging mask.
2000-12-30 08:49:11 +00:00
02d83a4c77
Fix PR port-hpcmips/11477 "only hpcmips panics with wireless network cards"
...
Adjust the payload of receive mbufs so the data following the
ethernet header is aligned.
2000-12-30 07:57:52 +00:00
a2fe1adf2a
for calling sc->sc_acessops->pollc,
...
use wsdisplay_cd.cd_devs[unit] in accessing wsdisplay_softc
instead of casting pointer.
XXX: i compiled it in i386, hpcmips, alpha.
2000-12-30 05:38:50 +00:00
804add680f
Regen.
2000-12-30 04:39:03 +00:00
6cfa6f67c1
Fix typo.
2000-12-30 04:38:02 +00:00
44f785d4cd
Add Sun psycho bus controller.
2000-12-30 04:34:51 +00:00
e5482757b5
Fix at least alpha kernel builds. You can't pun a pointer to a dev_t on
...
alpha. This is also a bad idea. I really don't know the ws code at all
or I would just fix the whole issue.
2000-12-30 02:58:42 +00:00
9785bf0526
notify console polling mode or not to lower level framebuffer driver.
...
notify EMUL mode or not to lower level framebuffer driver.
these may use framebuffer level hardware acceleration/software optimization.
2000-12-30 01:41:51 +00:00
2c65dfb9b5
Be less talkative in attach.
2000-12-30 00:37:24 +00:00
b1cf284bd6
s/AP0_UDMA_MASK/APO_UDMA_MASK/
2000-12-29 18:59:01 +00:00
60edf7be2c
Add a bus type for psycho controllers.
2000-12-29 17:15:04 +00:00
271adbd54e
Try to get rounding right when setting mixer values.
2000-12-29 14:49:28 +00:00
560f4a2254
Set the mixer delta field.
2000-12-29 13:28:41 +00:00
b85fdbbc47
Add a field in mixer_devinfo_t that indicates the minimum delta to
...
change mixer value. A value of 0 indicates that the driver doesn't
supply a delta.
The change is backwards compatible.
2000-12-29 10:00:08 +00:00
34ee8a0f06
Supply our own report descriptor (from Nick Hibma) for the Wacom Graphire.
...
The descriptor it reports is broken.
XXX Not tested, because I don't have the device.
2000-12-29 01:47:49 +00:00
79f0bd6e1f
Update many URLs.
2000-12-29 01:24:55 +00:00
e9853f047a
Update location of specs.
2000-12-29 01:14:15 +00:00
851de295eb
Change pci_intr_map to get interrupt source information from a "struct
...
pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".
This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.
Tested on alpha and i386; welcome to 1.5Q
2000-12-28 22:59:06 +00:00
d4c32f2a63
Apply nearly all of Bill Sommerfeld's -Wformat patches. The one
...
change I didn't take is the %llu format- I can't have a common
across multiple platform module assume a %ll argument capability-
which really pointed out that I shouldn't be trying to *print*
something which could long long.
2000-12-28 22:27:46 +00:00
3823efc25a
Apply Bill Sommerfeld's -Wformat changes.
2000-12-28 22:23:41 +00:00
0dae1b3d9a
Turn ISP_LOCK/ISP_UNLOCK into ISP_ILOCK/ISP_IUNLOCK macros for routines
...
that are driven from a timeout (oops, they're on the interrupt stack).
2000-12-28 21:37:04 +00:00
20d1ae1adb
Add two more quirks:
...
UQ_AU_NO_FRAC for audio devices that cannot handle adjustment for fractional
sample size.
UQ_AU_INP_ASYNC for input devices that claim to be adaptive, but are in fact
asynchronous (an easy mistake to make unless you read the specs carefully :)
2000-12-28 11:56:22 +00:00
1e0da50daa
Regen.
2000-12-28 11:53:25 +00:00
bdcc0b7ad1
Add device no for YAP phone with firmware loaded.
2000-12-28 11:53:01 +00:00
4dbac77503
#define for USB_2_0
2000-12-28 10:40:36 +00:00
8493d154d1
roll to 2.01.26 f/w
2000-12-28 08:30:40 +00:00
d81d268d13
Use the ISP_CFG_NOINIT flag to decide whether to complete the full init
...
process steps (this is used in some platforms where you want to bring
the adapter to ready (to get a WWN, e.g.) , but not engage either target
or initiator mode until some later time). Set the correct defaults WWNs.
2000-12-28 08:26:12 +00:00
a5498e1514
add an ISP_CFG_NOINIT flag
2000-12-28 08:24:17 +00:00
b551237fb6
add two minor ATIO2 offsets
2000-12-28 08:23:48 +00:00
829a533bfb
Restore the change fvdl made. Sorry about not noticing it. The
...
header (about 'Maintainer') is supposed to help encourage folks
to coordinate with me.
2000-12-28 08:11:52 +00:00
5236b76556
Make message about ignored endpoint a little clearer.
2000-12-28 01:01:42 +00:00
d2098567fe
Add audio terminal types.
2000-12-28 00:29:58 +00:00
59fcebab05
Regen. (Fix Acard UDMA IDE)
2000-12-27 15:36:42 +00:00
72347b9f8b
Fix entries of Acard UDMA IDE controllers.
2000-12-27 15:32:33 +00:00
4e15bd1d3a
add Novac PCMCIA-IDE Card(Card for HD530P PCMCIA-IDE Box).
...
No vendor ID, no product ID, and the wpp_cis_info is 'PCMCIA', 'PnPIDE'.
2000-12-27 10:41:00 +00:00
bd1b9290e5
Regen.
2000-12-27 04:16:19 +00:00
96a684549d
Add a VIA chipset and Nvidia GeForce2 MX.
2000-12-27 04:15:53 +00:00
a6fe4b78f2
Um, we need rnd.h so that cs_softc is defined properly. Overrunning structures
...
is bad.
NOTE: #IFDEF IN SOFTC DEFINITIONS IS BAD.
2000-12-26 09:42:21 +00:00
5b7fb2728a
Back out changes from 1.124 since the additions of *ports.master=-1 wasn't
...
documented as to why it was added in and it breaks the ability to set the
gain on playback. A longer term fix to set these correctly should be done but
none of the drivers today are doing this and not being able to set the playback
volume otherwise is a bit silly.
2000-12-25 00:01:39 +00:00
19c0d40186
Even stubs need improvements.
2000-12-24 06:42:34 +00:00
63fbac9a7d
Add some placeholders for the EHCI (USB 2) driver.
...
Don't get your hopes up. I've not even finished reading the
(100+) page spec, and I have no hardware.
2000-12-24 06:39:01 +00:00
a48c9194bb
Print the newline after the memory test. This makes it clear that the delay's
...
related to this driver rather than the next device to be attached.
2000-12-23 16:37:20 +00:00
690a8dbae1
fix typo: sigmips -> sgimips
2000-12-23 13:41:33 +00:00
d925692c76
Add arm26 fpu.
2000-12-23 13:40:21 +00:00
aa223e5bce
Regen. (Adding Acard UDMA IDE controllers)
2000-12-23 10:13:20 +00:00
cf4a7f824c
Add Acard UDMA IDE controllers.
2000-12-23 10:11:55 +00:00
c8b0b91e7e
Fix pathnames in comment.
2000-12-23 01:37:57 +00:00
024d36d353
- Fix bugs, make this useful.
...
- Add ioctls to start and stop the co-processor (if present).
2000-12-22 13:30:32 +00:00
2079f9d276
improve an_cmd() slightly:
...
- strip unnecessary loop to get command result status
- ack command after clearing busy bit
XXX: it still sometimes get timeout to get status(0xff50) or statistics(0xff68)
probably due to heavy load of firmware in receiving.
2000-12-21 15:37:18 +00:00
4ee7a7cdcd
use pcmcia_devinfo() to print product info.
2000-12-21 15:32:46 +00:00
e2ef1b88bb
Disable the 16-bit I/O space hack for ALL PROMISE CONTROLLERS.
...
This code is TOTALLY BROKEN and causes a NULL POINTER DEREFERENCE whenever it
is fired.
2000-12-21 01:19:24 +00:00
c6607f2fef
move definition of AN_INTRS from anreg.h to anvar.h
...
strip off AN_EV_CMD from AN_INTRS because it causes severe performance
problem.
2000-12-20 23:30:36 +00:00
35a8d9d1b4
eh, podloader
2000-12-20 21:17:35 +00:00
e3d7d246bb
Fix a debugging clause missed when fixing full-duplex support.
...
Noted by Wolfgang Rupprecht.
2000-12-20 21:06:41 +00:00
9a73f8b22b
Make _sure_ that we do not use selatn3 when it is not present. Fixes a
...
problem on pmax reported by Izumi Tsutsui. Tested also on alpha and mac68k.
2000-12-20 15:49:03 +00:00
e08387765d
The key below <escape> is now ~ (KS_asciitilde) when shifted in the
...
french layout.
This is consistent with the XFree layout, and is very convenient.
2000-12-20 14:53:18 +00:00
22be9ab855
Add IO Data CBIDE2 ata interface card.
2000-12-20 09:56:34 +00:00
5f8d27d58b
regen.
2000-12-20 06:24:37 +00:00
f899f18228
Add IO Data CBIDE2 ata interface card.
2000-12-20 06:05:13 +00:00
824092cc68
Regen, because jhawk didn't
2000-12-20 05:03:37 +00:00
391d469a00
Backout most of 1.46, because Jason checked in a load of crap from
...
his local tree that doesn't build with -current...
2000-12-20 04:36:26 +00:00
6cca4087d9
s/NULL}/NULL }/
...
Did I mention this awk script really sucks?
2000-12-20 04:32:48 +00:00
d1ab475964
Make the driver negotiate sync again and remove some (hopefully) superfluous
...
DELAY()s.
2000-12-20 03:19:34 +00:00
814729d3ae
Regen.
2000-12-19 17:11:38 +00:00
d4bbed68f8
" " -> "&sp" in two entries, per Rafal Boni.
2000-12-19 17:11:22 +00:00
54e034de88
Identify the SMC 2632W as a Prism II. From Rafal Boni, kern/11776.
2000-12-19 16:55:57 +00:00
ef0031e520
Regen; add SMC 2632W.
2000-12-19 16:54:14 +00:00
0ca5cacc47
Add SMC 2632W. From Rafal Boni, kern/11775.
2000-12-19 16:53:41 +00:00
c6bd81f8a6
Fix reversed logic when setting setting sync-negotiation ability flag
2000-12-19 14:08:17 +00:00
b3345434e4
Fix an error in xoffset calculation. Revealed in the case when
...
ri_width is less than ri_stride and screen is layouted RI_CENTERed.
2000-12-19 09:52:53 +00:00
684fe5613d
cleanup attach procedure, use tsleep() instead of long delay (and ignore
...
timeouts).
stop driver after suspend.
XXX: should use command interrupt but no document...
XXX: status update sometimes failed perhaps due to collision.
(RID 0xff50 or 0xff68 access failed)
2000-12-19 08:00:55 +00:00
045091aa8f
Add a big comment in the previous section of code...
2000-12-19 06:23:26 +00:00
463d0e577e
Back out previous change.
...
I removed this once before a long time ago, because it's wrong and breaks
PCMCIA on some machines. It also doesn't fix the Multia problems.
2000-12-19 06:04:02 +00:00
0db43ad6ce
Kill extra "attached" message.
2000-12-19 04:36:05 +00:00
f9af49b21b
I've inverted the logic of an_probe() in my previous commit to dev/ic/an.c
2000-12-19 01:59:21 +00:00
3475e639f3
Add register #defines similar to those in <dev/pci/tgareg.h>, referring to
...
a 32-bit sfb_reg_t, for easy comparison between tga and sfb Xservers.
2000-12-19 01:25:46 +00:00
aaad4d0284
Add quirk for Avance Logic ALS100+, which doesn't like it's irq/drq
...
being set in pnp mode.
2000-12-19 01:09:15 +00:00
324ff9ac52
Regen
2000-12-19 01:08:13 +00:00
a006fdf328
Correct ALS100+ entry.
2000-12-19 01:07:52 +00:00
augustss