a835c012d3
Adjust PCLKDIV by 2 to correct the output sample rate. (Unfortunately, this
...
isn't documented.)
Fix typo in mappage routine.
1998-05-02 08:21:10 +00:00
fef6b0b8a3
Oops; fix typo.
1998-05-02 02:36:30 +00:00
cfe3e5fb08
Fix reading of the master volume, and a hack that seems to make stereo output
...
work correctly. (Will check the documentation as soon as I can read it.)
1998-05-02 02:34:53 +00:00
6cb1f6c5b1
Add a driver for the Ensoniq AudioPCI sound card. The driver still
...
needs some testing, but it seems to produce sound. The driver was written
by me, but since I don't have the hardware the debugging and testing was
done by Andreas Gustafsson <gson@araneus.fi>, Chuck Cranor
<chuck@maria.wustl.edu>, and Phil Nelson <phil@cs.wwu.edu>. Thanks.
1998-05-01 21:54:33 +00:00
aa7159be03
Regen.
1998-04-30 06:18:45 +00:00
6e626dfafc
Add the Apple Bandit chip.
1998-04-30 06:18:11 +00:00
9a25b32914
Use the symbolic name VVR_BLANK rather than a magic constant.
1998-04-29 02:23:20 +00:00
6493eddd91
Define the contents of the Video Valid register on the TGA and TGA2.
1998-04-29 02:11:19 +00:00
53d3aa940b
Sync with recent change made to bha.c by mjacob:
...
Cute buglet: you can end up with zero CCBs if there were no targets
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-29 01:02:44 +00:00
1acc8b53b5
Cute buglet: you can end up with zero CCBs if there were no targets
...
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-28 23:57:53 +00:00
df71a424d6
Change debug printing a littel again.
1998-04-28 23:19:20 +00:00
28454023cc
Add a comment about some future work.
1998-04-28 19:13:24 +00:00
41d55197b4
In wdcintr(), add a catch-all case so that this will compile if no
...
children are configured.
1998-04-28 18:36:07 +00:00
925fe63713
Fix a couple of function names used in diagnostic printfs.
1998-04-28 17:48:35 +00:00
127acabd9c
Add a few more debug messages and clean up debug printing a little.
1998-04-28 09:07:12 +00:00
0b2694152f
Update copyright.
1998-04-26 06:03:23 +00:00
eddaea2d53
In LBA mode, always use the `total capacity' count, rather than calculating
...
the capacity based on the c/h/s numbers. In fact, don't use the c/h/s
numbers for much of anything.
For ATA-4 drives or later, always use LBA mode, since it's now required.
Collectively, this allows >8GB disks (like the 12GB Bigfoot) to work.
1998-04-26 05:28:23 +00:00
4bca66087f
Now works with the Digital Hinote Ultra Mobile Media CD-ROM
1998-04-25 17:43:27 +00:00
0652ed68a5
Initialize sc_frequency. (How could this ever work?)
...
Add PnP entry for USR Sportster 56k internal modem.
Remove BROKEN_INDIRECT_CONFIG.
1998-04-25 10:58:24 +00:00
7bd7c58939
Fix function argument type.
1998-04-24 20:20:33 +00:00
68096acabd
From Robert V. Baron:
...
Compute the disk block addr at command queing time rather than exec time.
This fix a bug which could lead to data corruption on disk: when a command
was reexecuted after an error condition (from wdcunwedge), the partition
offset was re-added to the block addr, leading to a transfert at the wrong
disk block.
This should fix the problem reported by some laptop's users, where the
first disk read after a suspend/resume returned garbage.
1998-04-23 13:30:39 +00:00
7ba46a56e0
Correct defifintion of the WDCE_MCR and WDCE_ABRT bits: they have been
...
inverted since the begining.
This doesn't change anything, as these bits are not used in the driver.
1998-04-23 10:37:01 +00:00
63babb7549
Ignore LUN on yet another cdrom
1998-04-23 00:38:01 +00:00
84d2c38974
Set a flag during auto-configuration, so SCSI_AUTOCONF can be passed
...
when doing additional I/O from the scanner attach functions.
1998-04-22 19:44:18 +00:00
9663e5f689
Make probe message more consistent with usual practice.
...
From "Soren S. Jorvang" <soren@t.dk>.
1998-04-20 20:58:05 +00:00
5f6ca9ef93
Avoid "unused variable" warning without PCIVERBOSE.
...
From mynhier@cs.utk.edu (PR kern/5328).
1998-04-20 14:16:26 +00:00
3cdf7f6607
Undo change from drochner (Rev 1.4 of wsksymdef.h) and fix PR #5298 and #5299 .
1998-04-20 10:47:36 +00:00
cef633de2a
Fix a fencepost in last change.
1998-04-19 22:26:31 +00:00
b4d3bac06e
pmax has IPL_ constants; Define TC_IPL_ using them until all tc
...
drivers are converted to use IPL_.
Commit changes to if_le_ibus.c as a child of ibus.
1998-04-19 13:04:24 +00:00
c84f4e94d9
Copy alpha/tc/mcclock_ioasic.c (duplicated in pmax/tc/mcclock_ioasic.c)
...
into sys/dev/dec and split into a clockfns layer and a "middle" layer
for other DEC systems which use mcclocks with each onchip byte
register padded out to a 32-bit word.
Clone alpha/alpha/mcclock (also duplicated in pmax port) into
sys/dev/dec, and ifdef for default clockrates on pmax and alpha.
Use new machinery on pmax for ibus,ioasic attached mcclocks.
1998-04-19 07:50:25 +00:00
558e40fb86
Remove duplicate of sys/dev/dec/clockvar.h.
1998-04-19 06:11:55 +00:00
90b5c246c6
Skeleton code for the SBus expander box.
1998-04-18 19:00:17 +00:00
fb43bb5f19
Add danish keymap.
...
From Soren S. Jorvang (PR kern/5312).
1998-04-18 10:57:13 +00:00
13c6d27696
Fix spelling of my name.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-18 10:35:48 +00:00
d58832579d
Fix botched DMA tag initialization.
1998-04-18 10:26:56 +00:00
302692bf8d
Namespace protection: give key description table a more private name.
1998-04-18 09:51:20 +00:00
1745de275b
-Set keyboard (and/or controller) to XT scancode in early console
...
initialzation. Closes PR port-alpha/5303 (Jason Thorpe).
-Namespace protection: give key description table a more private name.
-Make sure "struct pckbd_internal" is completely initialized.
-Improve locator comparition in probe().
-Remove BROKEN_INDIRECT_CONFIG.
1998-04-18 09:49:58 +00:00
a099e8dda5
Initialize the command byte and its shadow register in early console
...
setup so that the keykoard driver can deal with scancode translation
in its console initialization function.
1998-04-18 09:42:20 +00:00
928943b2ff
Keep all relevant state information in a "pci_softc" so that it is
...
accessible at runtime (for LKMs in particular).
Remove BROKEN_INDIRECT_CONFIG.
1998-04-17 18:40:31 +00:00
085787ddbe
defopt the WSEMUL options.
1998-04-17 00:17:27 +00:00
d3067d3f3f
-don't modify call arguments in place - bad for debugging
...
-give at least the i386 its keyboard beep back
1998-04-16 21:18:46 +00:00
d860c80512
regen
1998-04-16 19:48:14 +00:00
bfd53bac43
add 2 ATM chips, correct entry for Toshiba MIPS bridge
1998-04-16 19:46:03 +00:00
30654f3e89
Split out from if_le_isa.c - this card is quite different.
...
The driver is known not to work (timeout on send attempts).
1998-04-16 18:00:14 +00:00
02157092d4
Make the ISA LANCE drivers work without BROKEN_INDIRECT_CONFIG.
...
DEPCA is now split out into a separate driver.
Because there can be only one attachment of a device to a bus, for
each card type a separate pseudo-bus was introduced which attaches to "isa"
and where "le" attaches to.
1998-04-16 17:51:46 +00:00
10860a27c6
Don't use KS_GROUP_xxx values which have set something in the lower
...
8 bits. This allows to OR them with keycodes.
This is probably a workaround for namespace confusion happening else-
where (in wskbdutil.c:ksym_upcase() perhaps?), but it helps without
too much digging into the details.
1998-04-16 13:29:41 +00:00
3cc1fe831c
count allocated screens correctly
1998-04-16 12:52:42 +00:00
112b5de402
Use a stream method for AHC_OUTSL when possible.
1998-04-16 07:13:57 +00:00
d3febbb5aa
Do endian swaps where appropriate. This is currently dependent on 'BYTE_ORDER'
...
since the driver only supports little endian busses.
1998-04-16 07:12:43 +00:00
b66dd55f59
Backout endian changes here (per discussion with Justin) and move them to
...
aic7xxx.c
1998-04-16 07:07:37 +00:00
mycroft