jdc
2133a0f528
Add libahdi entries.
2000-02-05 20:54:12 +00:00
jdc
470ef7861d
Routines to handle Atari's AHDI disk partitioning scheme.
2000-02-05 20:40:35 +00:00
nathanw
958e687d69
LP64 printf fixes.
2000-02-05 20:02:42 +00:00
kleink
c54d3e28e2
Go via *__errno() here, too.
2000-02-05 19:53:54 +00:00
jdc
b7d67025a8
Replace .Bd' and
.Bl' with `.Bl' only.
2000-02-05 19:50:24 +00:00
mhitch
4130a78e00
Add amiga config line.
2000-02-05 19:34:07 +00:00
kleink
c3ed25e892
Implement *__errno() indirection.
2000-02-05 19:20:53 +00:00
danw
ff856525f8
#include <stdio.h> to cover the use of "FILE *" in one of the prototypes.
...
(The stock tcpd.h doesn't have prototypes, and some third-party code assumes
it can include tcpd.h without stdio.h.)
2000-02-05 19:14:57 +00:00
mhitch
d9b42dd1fc
At long last, the MI wdc glue for the Amiga. Tested on my A4000, but not
...
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
2000-02-05 18:46:28 +00:00
mhitch
db4859bcd8
Regen (with commented MI wdc stuff)
2000-02-05 18:42:49 +00:00
chopps
6d8c9583a7
indent this file
2000-02-05 18:42:37 +00:00
mhitch
915731c9ea
Add commented out configuration for MI wdc.
...
Note: enabling these will cause disk device renumbering if any IDE were
present (i.e. if sd0 was IDE drive 0, that drive will become wd0 and sd0
will be the first real SCSI drive.
2000-02-05 18:41:58 +00:00
jlam
4a47d48db2
Install correct ld.so.conf if etc.${MACHINE}/ld.so.conf exists.
2000-02-05 18:25:01 +00:00
chopps
101848d272
run this through indent with some comment cleanup -- more knfing needed.
2000-02-05 18:20:08 +00:00
augustss
494c9affea
Support detach.
2000-02-05 18:11:55 +00:00
itojun
9e9f3e15e4
need PRC_IF{UP,CHANGE}.
2000-02-05 18:11:41 +00:00
itojun
7604e315fb
sync with reality.
...
- getipnodeby{name,addr} is now non-issue as RFC2553bis will be dropping it
- if_detach is mostly done
- add some items
2000-02-05 18:05:33 +00:00
itojun
aba424872a
add IPv6 loopback address (::1).
2000-02-05 17:53:30 +00:00
itojun
64170fdeab
remove (slightly) bogus comment line about IPv6 config.
2000-02-05 17:52:06 +00:00
itojun
e07bdd0262
use getnameinfo for "Trying ::1..." message, to enable printing of
...
IPv6 scopeid.
2000-02-05 17:44:11 +00:00
itojun
9fb53279e8
print IPv6 scopeid on -inv. with -in, scopeid is omitted due to insufficient
...
width.
2000-02-05 17:39:22 +00:00
itojun
e9056d34cb
change IPv6 configuration syntax to avoid ambiguity.
...
ip6mode=host: IPv6 host
ip6mode=autohost: IPv6 host, with autoconfig
ip6mode=router: IPv6 router
backward compatibility to "ip6forwading" is provided.
2000-02-05 17:02:42 +00:00
minoura
8759daabe7
Sync.
2000-02-05 14:35:41 +00:00
kleink
36e6bc645e
Improve namespace test macros a bit.
2000-02-05 14:04:36 +00:00
pk
b527153dd7
Ensure uniqueness of EEPROM device without reference to cf_unit.
2000-02-05 12:32:57 +00:00
enami
3fb18954ab
- The -B flag should be followed by logical segment size.
...
- Remove unnecessary comma at the end of SEE ALSO list.
2000-02-05 11:57:30 +00:00
enami
f0b2202df0
Kill the period in the SEE ALSO list.
2000-02-05 11:52:37 +00:00
enami
e91af3b888
Sync wi/ what mdoc.samples(7) says:
...
- The default argument of Ar macro is file ...
- Use or Ap ing.
2000-02-05 11:39:16 +00:00
itojun
1f8497dc18
fix route cleanup on interface removal. (not sure why -Wall did not catch it)
2000-02-05 07:58:54 +00:00
itohy
b4f060a0bc
Mark LFS partitions as "BSD lfs ".
...
Now, swap partition should be "BSD swap" unless COMPAT_14.
2000-02-05 07:38:10 +00:00
enami
645c869160
Add detach support for ethernet portion.
2000-02-05 04:44:00 +00:00
enami
9267b8f018
Remove unnecessary includes.
2000-02-05 04:41:49 +00:00
enami
abac10f360
Yet anothor workaround for hpcmips. I guess real problem is somewhere else...
...
With rev.1.37, my MobileGearII for DoCoMo finds both ne0 and wd0
even if pcic_delay_sleep is 1.
With rev 1.40, it fails to find wd0.
2000-02-05 04:34:36 +00:00
cgd
be8a1b19f0
more CR/NL -> NL conversion (some crept in)
2000-02-05 03:25:26 +00:00
cgd
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
cgd
253b179629
clean up (group, sort) __HAVE_* defines
2000-02-05 00:07:30 +00:00
tsubai
c343256107
Make the new findroot code work on PowerMac 9600 (OF-1.0.5).
2000-02-04 18:29:15 +00:00
dante
2a46aa5d9a
Fix "unused variable" warning when FAILSAFE option is defined
2000-02-04 16:23:14 +00:00
dante
b4edda97d5
Fix a compilation bug due to a missing parenthesys
2000-02-04 15:43:46 +00:00
pk
28017b2956
get_localdir: fix variable use in error message (PR#8913)
...
+ clarify expected input.
2000-02-04 15:28:28 +00:00
itojun
f91ee608a9
avoid calling in6_control(SIOCDIFADDR_IN6) from interrupt context.
...
it is not supposed to work.
logging fix: add "\n" to some of log() in in6_prefix.c.
improve in6_ifdetach(). now almost all structure depend on ifnet
will be cleared up.
possible loose ends:
- cached route_in6 in static varaiables needs to be cleared as well
- there are ifaddr manipulation without reference counting,
which should be fixed
we still see panics after card removal, though... not sure what is left.
(sync with kame)
2000-02-04 14:34:22 +00:00
minoura
a7ec5e9634
Add Cyrix MediaGX(m) identification.
...
Thanks to INOUE Yoshinari <pf5y-inue@asahi-net.or.jp>.
2000-02-04 14:21:33 +00:00
kleink
c67e34c8c7
Typoe in previous.
2000-02-04 14:21:07 +00:00
augustss
e037c568cb
Update for cardbus unmap changes.
2000-02-04 13:48:23 +00:00
augustss
1facb42e6e
Make the driver work even if DIAGNOSTIC is not set.
2000-02-04 13:43:56 +00:00
dante
29be498635
Add a list of all the currently supported boards
2000-02-04 13:16:22 +00:00
dante
0576ea6a40
Add AdvanSys U2W boards support
2000-02-04 13:11:58 +00:00
enami
9c688fd57c
s/SYSTEM/SYSMEM/; so that this file compiles again.
2000-02-04 11:04:46 +00:00
jdolecek
1371d1b72d
add support for msdosfs
2000-02-04 11:02:00 +00:00
veego
55eb03baa3
Don't install the idea, rc5 and rsa headers from openssl.
2000-02-04 10:44:24 +00:00