28cbceeec7
Make this more likely to work.
1994-10-23 19:24:01 +00:00
e5d974c51f
First cut at making user-level SCSI commands work. This is untested.
...
Partly from John Brezak.
1994-10-20 20:31:23 +00:00
b8ab5f65d1
Back out change to print geometry from label at boot; can't do this reliably.
1994-10-20 16:54:44 +00:00
7d391c250d
Fix minor omission.
1994-10-20 14:10:18 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
bb12b9c8a2
Trivial stylistic changes.
1994-10-20 14:05:08 +00:00
caaeda044b
Similar changes to sd.c.
1994-10-20 14:03:38 +00:00
b1568d887e
Use the block size in the label in most cases.
1994-10-20 13:50:38 +00:00
d5b3572f5c
Various changes:
...
* Get rid of unused `partflags'.
* Use dk_openpart, and remove `openparts'. Also, allow an open on both
the block and characters devices at the same time.
* If there was a label, print the geometry from the label at boot time.
* Turn `wlabel' into a flag, and *don't* set it automatically in
DIOCWLABEL; disklabel(8) does that.
Other minor changes.
1994-10-20 13:33:36 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
5aa2f1e6bb
remove an un-aligned access
1994-08-30 17:01:57 +00:00
692c724215
un-aligned access is not cool on some processors
1994-08-12 08:57:18 +00:00
da79c879cd
On probe or open, retry the READ CAPACITY once if the drive reports NOT READY.
1994-08-11 23:51:26 +00:00
3e685aec5c
Change ST_Q_NEEDS_PAGE_0 to something more generic.
1994-08-09 18:50:17 +00:00
558c00c001
Fix spelling of `STEREO'.
1994-08-05 22:56:19 +00:00
b5c5c47f92
Obey the command queue size for the controller.
1994-08-04 09:52:47 +00:00
863c736e39
Normalize label handling.
1994-07-26 19:39:19 +00:00
b10a5d5fac
change to support other MAXPARTITIONS vals aside from 8
1994-07-04 20:39:46 +00:00
fd7c79353e
knf
1994-06-29 23:32:42 +00:00
fccfa11af5
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:39:25 +00:00
72679b6801
Fix a comment.
1994-06-19 03:29:37 +00:00
7d3285c3d4
resolve confusion over who owns the buf after calling scsi_scsi_cmd()
1994-06-16 15:57:39 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
d023a319a4
Nuke some junk in scsi_link, as pointed out by Gordon.
1994-05-12 22:16:04 +00:00
02ec14c597
Add dummy *dump() routines.
1994-05-11 09:49:17 +00:00
95faa87c60
remove union's from sense_data struct, conditionaly define RAW_PART
1994-05-09 07:40:47 +00:00
efbbf1b09f
Deal with variable-length drives that don't specify a maximum block size.
...
c.f. SCSI 2 protocol definition.
1994-04-24 05:40:05 +00:00
df873c8545
Maintain the xs free list with LIST_*().
1994-04-20 22:13:33 +00:00
eee893f9ea
Various cleanup, but no functional differences.
1994-04-13 05:43:19 +00:00
58dfc9dffc
Fix various types. Remove some outdated flags.
1994-04-11 03:53:58 +00:00
c01cb5c454
Fix various types. Remove some outdated flags. Actually sleep a bit if
...
there are too many commands pending on the controller.
1994-04-11 03:53:45 +00:00
8b10b2cd18
Combine scsi_start_unit() and scsi_stop_unit(), and increase the start
...
timeout (again).
1994-04-11 02:23:41 +00:00
f16c2e25f8
Add another rogue...
1994-04-10 00:07:02 +00:00
5fe1b5b538
Redo the last change; it was compltely bogus.
1994-04-06 00:43:57 +00:00
87e831ef86
Try to detect garbage data from page 4 sense.
1994-04-06 00:23:31 +00:00
100fdbd6d1
This line is redundant for LD_UNLOAD (only one use, and it does this itself)
...
but breaks LD_RETEN, forcing a reload of the driver state on the next I/O
operation. Therefore, it goes away.
1994-04-05 22:39:37 +00:00
8d0730c420
Reload the tape after retension.
1994-04-05 22:18:00 +00:00
44f11a89b3
Implement MTRETEN (untested).
1994-04-05 22:08:09 +00:00
692dc0e998
Implement MTEOM, currently untested.
1994-04-05 21:59:49 +00:00
96f452cd84
Deal with Mark Weaver's rogue tape drive.
1994-04-01 06:49:22 +00:00
72a5d83ab3
Clean up deleted files.
1994-03-29 04:29:47 +00:00
2e5a28159f
New SCSI system, based on Julian's more recent work.
1994-03-29 04:29:20 +00:00
d5a269b4dd
Put controller target in scsi_switch.
1994-03-25 07:38:51 +00:00
c3218832ba
print even more SCSI sense data; this should be in a function...
1994-03-24 17:47:35 +00:00
20c82de12d
print out lots of info on non-media hardware error...
1994-03-24 04:32:44 +00:00
499efbcbdd
More KNF-like.
1994-02-16 02:41:10 +00:00
4335fa14b3
Increase the timeout for start_unit.
1994-02-16 00:47:35 +00:00
94b2718bd1
PARANOID --> DIAGNOSTIC for inexpensive tests.
1994-02-14 21:43:33 +00:00
adeebc448e
Use b_actf, not av_forw.
1994-02-06 10:00:30 +00:00
42e64dc254
Remove another use of b_actl.
1994-02-06 08:01:45 +00:00
mycroft