Changes:
- membar_producer();
*p = v;
=>
atomic_store_release(p, v);
(Effectively like using membar_exit instead of membar_producer,
which is what we should have been doing all along so that stores by
the `reader' can't affect earlier loads by the writer, such as
KASSERT(p->refcnt == 0) in the writer and atomic_inc(&p->refcnt) in
the reader.)
- p = *pp;
if (p != NULL) membar_datadep_consumer();
=>
p = atomic_load_consume(pp);
(Only makes a difference on DEC Alpha. As long as lists generally
have at least one element, this is not likely to make a big
difference, and keeps the code simpler and clearer.)
No other functional change intended. While here, annotate each
synchronizing load and store with its counterpart in a comment.
Since the tests don't (usually) fail no-one ever noticed the missing char.
That is, the "received this" and "expected this" strings were supposed
to appear in the output err message as "<<string>>" but one of those
closing '>' chars was missing.
No-one should ever notice this change in normal operation, as the tests
are not intended to fail.
Change the code to remove the LWP id assumptions that broke after
src/sys/kern/kern_lwp.c r. 1.206.
Original code by <mgorny>, tested and tweaked by myself.
- Add 'mach' and 'vcpu' backpointers in the nvmm_io and nvmm_mem
structures.
- Rename 'nvmm_callbacks' to 'nvmm_assist_callbacks'.
- Rename and migrate NVMM_MACH_CONF_CALLBACKS to NVMM_VCPU_CONF_CALLBACKS,
it now becomes per-VCPU.
issues in the libnvmm API.
- Rename NVMM_CAPABILITY_VERSION to NVMM_KERN_VERSION, and check it in
libnvmm. Introduce NVMM_USER_VERSION, for future use.
- In libnvmm, open "/dev/nvmm" as read-only and with O_CLOEXEC. This is to
avoid sharing the VMs with the children if the process forks. In the
NVMM driver, force O_CLOEXEC on open().
- Rename the following things for consistency:
nvmm_exit* -> nvmm_vcpu_exit*
nvmm_event* -> nvmm_vcpu_event*
NVMM_EXIT_* -> NVMM_VCPU_EXIT_*
NVMM_EVENT_INTERRUPT_HW -> NVMM_VCPU_EVENT_INTR
NVMM_EVENT_EXCEPTION -> NVMM_VCPU_EVENT_EXCP
Delete NVMM_EVENT_INTERRUPT_SW, unused already.
- Slightly reorganize the MI/MD definitions, for internal clarity.
- Split NVMM_VCPU_EXIT_MSR in two: NVMM_VCPU_EXIT_{RD,WR}MSR. Also provide
separate u.rdmsr and u.wrmsr fields. This is more consistent with the
other exit reasons.
- Change the types of several variables:
event.type enum -> u_int
event.vector uint64_t -> uint8_t
exit.u.*msr.msr: uint64_t -> uint32_t
exit.u.io.type: enum -> bool
exit.u.io.seg: int -> int8_t
cap.arch.mxcsr_mask: uint64_t -> uint32_t
cap.arch.conf_cpuid_maxops: uint64_t -> uint32_t
- Delete NVMM_VCPU_EXIT_MWAIT_COND, it is AMD-only and confusing, and we
already intercept 'monitor' so it is never armed.
- Introduce vmx_exit_insn() for NVMM-Intel, similar to svm_exit_insn().
The 'npc' field wasn't getting filled properly during certain VMEXITs.
- Introduce nvmm_vcpu_configure(). Similar to nvmm_machine_configure(),
but as its name indicates, the configuration is per-VCPU and not per-VM.
Migrate and rename NVMM_MACH_CONF_X86_CPUID to NVMM_VCPU_CONF_CPUID.
This becomes per-VCPU, which makes more sense than per-VM.
- Extend the NVMM_VCPU_CONF_CPUID conf to allow triggering VMEXITs on
specific leaves. Until now we could only mask the leaves. An uint32_t
is added in the structure:
uint32_t mask:1;
uint32_t exit:1;
uint32_t rsvd:30;
The two first bits select the desired behavior on the leaf. Specifying
zero on both resets the leaf to the default behavior. The new
NVMM_VCPU_EXIT_CPUID exit reason is added.
Fix a race condition that caused PT_GET_SIGINFO to return incorrect
information when multiple signals were delivered concurrently
to different LWPs. Add a regression test that verifies that when 50
threads concurrently use pthread_kill() on themselves, the debugger
receives all signals with correct information.
The kernel uses separate signal queues for each LWP. However,
the signal context used to implement PT_GET_SIGINFO is stored in 'struct
proc' and therefore common to all LWPs in the process. Previously,
this member was filled in kpsignal2(), i.e. when the signal was sent.
This meant that if another LWP managed to send another signal
concurrently, the data was overwritten before the process was stopped.
As a result, PT_GET_SIGINFO did not report the correct LWP and signal
(it could even report a different signal than wait()). This can be
quite reliably reproduced with the number of 20 LWPs, however it can
also occur with 10.
This patch moves setting of signal context to issignal(), just before
the process is actually stopped. The data is taken from per-LWP
or per-process signal queue. The added test confirms that the debugger
correctly receives all signals, and PT_GET_SIGINFO reports both correct
LWP and signal number.
Reviewed by kamil.
address size is 16 bits, regardless of the actual operating mode. With
this special map there can be two registers referenced at once, and
also disp16-only.
Implement this special behavior, and add associated tests. While here
simplify a few things.
With this in place, the Windows 95 installer initializes correctly.
Part of PR/54611.
GCC_NO_FORMAT_TRUNCATION -Wno-format-truncation (GCC 7/8)
GCC_NO_STRINGOP_TRUNCATION -Wno-stringop-truncation (GCC 8)
GCC_NO_STRINGOP_OVERFLOW -Wno-stringop-overflow (GCC 8)
GCC_NO_CAST_FUNCTION_TYPE -Wno-cast-function-type (GCC 8)
use these to turn off warnings for most GCC-8 complaints. many
of these are false positives, most of the real bugs are already
commited, or are yet to come.
we plan to introduce versions of (some?) of these that use the
"-Wno-error=" form, which still displays the warnings but does
not make it an error, and all of the above will be re-considered
as either being "fix me" (warning still displayed) or "warning
is wrong."
This is a torture, but on purpose to catch LWP_CREATED and LWP_EXITED bugs.
The threads do nothing other than calling sched_yield() in a loop.
MAXLWP is now defined to 2048 on all ports.
This change effects the following tests:
- trace_thread_nolwpevents
- trace_thread_lwpexit
- trace_thread_lwpcreate
- trace_thread_lwpcreate_and_exit
avoid passing the same pointer in multiple arguments for restrict
marked arguments:
- sigaction() wants separate in/out
- use memmove() not memcpy() for overlapping regions (this may fix
a real bug in nvi -- but it seems unlikely)
- select() wants separate read/write/except
- sigprocmask() wants separate set/oset
Assert that PT_GET_PROCESS_STATE for !child and !lwp events returns
non-error and zeroed struct ptrace_state.
These checks are not really special to traceme_raise, it's just an
opportunity to reuse them in an existing tests without writing a dedicated
one.
This behavior is needed to maintain in 3rd party software (GDB).
validate that utimes() cannot update the times of a file on a read only
filesystem. The values are never actually used, but since
src/sys/kern/vfs_syscalls.c 1.535
they are validated for sanity, and the syscall returns EINVAL if the
values passed are invalid (tv_usec <0 or >= 1000000). If that happens
we don't get as far as the test which produces the EROFS that is expected
from this test (these tests - one for each filesystem type).
So, init the timeval structs (just to 0, the values will still not be
used) so that the EINVAL doesn't bite us before we're eaten by the EROFS
which is the way we're supposed to die.
If the syscall API args were labelled as "const" the compiler probably
would have caught the use of uninit'd vars and complained much sooner.
- Add cchar command to director test language to allow a complex character
to be defined and passed to the slave.
- Removed the distinction between args and returns internally to prevent
confusing the two which leads to errors and/or crashes.
- Converted mutt_test to use the new cchar definition and fixed the
check files for the test.
filesystem tests. Use the new -J option to pass the raw device into
the cleaner. This avoids the not rump safe getdiskrawname call and
makes sure we use an internal rump device name for cleaning. This
should fix bin/54488.
macallan