Strongly architect handles so we can more easily detect bogus
handles. This switches us to a full 32 bits for all handles.
Handle the case of FC disks disappearing and then reappearing-
at least at the FC transport level.
Some better and finer control of debug and non-debug printouts.
Reintroduce more of a 'channel' concept in preparation for NP-IV support.
This gets rid of the chanA/chanB concept as the 2400 can have up to 128
virtual channels. Actually, with MID firmware you can also have the 2200
and 2300 support 'channels, but they do it with an FL-Port topology.
Because FC cards can now have 'channels', just about every support
function for fibre channel had to be redone to have a channel index
as well. Rototill isp_ioctl.h for channel stuff as well.
Pick up a lot of work about fabric management (hopefully better) and keep
work in place that will allow for dynamic attachment/detachment of devices
(if I can figure out how to make the midlayer support it).
Merge the target code with external trees. Eventually it might even
be sorted out on NetBSD.
Update some firmware stuff.
The major changes are:
+ 4Gb (24XX) card support
+ Rewritten fabric and loop evaluation code
+ New f/w sets
The 4Gb changes required major rototilling, which caused a rewrite of
fabric and loop eval code. The latter can now be set up to tune for
dynamic device arrival/departure if the framework is set up for it,
or to be firm about waiting for devices.
Testing has been principally on amd64, i386 and sparc64 and seems to
not have broken things for me.
Distinguish between 2312 and 2300 cards (they *are* different). Enable
RIO (Reduced Interrupt Operation) for the LVD cards (hey- I've seen
batched completions of the 30 commands at a time with this,....)...
If we get a Port Logout on local loop topologies, we have to force the
f/w to log back in. The easiest way (for us) to do this is to force
a LIP. This also will wake up the disk that probably just had a f/w crash.
Implement mailbox 'continuations'- this allows interrupts to re-drive
a mailbox command if it's one that just essentially repeats the previous
mailbox command (e.g., f/w download). This saves a boatload of sleep/wakeup
twitches.
If we're not a 2300 and we're about to return with a 'bogus interrupt'- check
the semaphore register to be non-zero at all and outgoing mailbox 0- this
seems to be where some of the lost ISP1080 commands came from.
in how interrupts are down- the 23XX has not only a different place to check
for an interrupt, but unlike all other QLogic cards, you have to read the
status as a 32 bit word- not 16 bit words. Rather than have device specific
functions as called from the core module (in isp_intr), it makes more sense
to have the platform/bus modules do the gruntwork of splitting out the
isr, semaphore register and the first outgoing mailbox register (if needed)
*prior* to calling isp_intr (if calling isp_intr is necessary at all).
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
Correctly account for F-port vs. F-port (no FLOGI_ACC) topologies.
Make sure we get a port database entry for the fabric name server.
Preserve fabric logins if the device didn't change across fabric
or port database changes, or the device has already logged into
us (e.g., for target/initiator dual role devices like Veritas
SANbox). Propagate class 3 service parameter changes where devices
can change roles.
Fix all occurrences of setting a sendmarker so that setting it
for one bus on dual bus cards doesn't wipe a pending sendmarker
for other busses on the same card :-;.
Comments added and clarifications made in some of the target mode code.
(e.g., the 1240). Include the new 1080/1240 NVRAM layout reading code. Some
moderately significant mailbox changes were necessary also to accomodate a
second channel.
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).
Roll internal release tags.
for FC HB based upon a SCCLUN define (15 for normal- 255 out of a possible
65535 for SCCLUN). Propagate loopid as adapter_target.
Roll minor platform version. Roll core version number.
Update mailbox definitions with cleaner target mode structure definitions.
Clean up some ENDIAN stuff. Correct botched ISP2100_NVRAM_HARDLOOPID offset.
There is one change of note- build a list of completing commands in
ispintr and then say you're done- this avoids some re-entrancy issues
that had surfaced.
mjacob