8782935dec
try to sync lists of rc.d scripts
2013-05-16 07:37:05 +00:00
48ffade9e8
Add an entry for scif0 serial.
2013-05-08 15:14:27 +00:00
829ceb66b9
Make sure to create serial device nodes (scif0 and sci0).
2013-05-08 14:59:41 +00:00
a3a6189341
Fix typo in previous
2013-05-01 15:57:44 +00:00
d7199a4b01
Install pkgpath.conf in /etc - part of fix for misc PR/47645
2013-05-01 15:55:53 +00:00
4aba7d3a0d
Support to build for epoc32 userland.
2013-05-01 13:11:59 +00:00
1410cf30c2
Fix for problematic paths in /etc/daily and /etc/security reported in
...
PR/47645.
Add a separate file which contains the paths for the pkg_admin and
pkg_info utilities. This is called /etc/pkgpath.conf (to distinguish it
from pkg.conf).
Thanks also to Edgar Fuss for the sanity check.
2013-05-01 05:36:25 +00:00
8ac2e441e7
Add sample code to suppress copyright message on interactive logins.
2013-04-30 21:03:43 +00:00
fb2f15afec
Fix yet another "openpty() failed" error during sysinst.
...
Prepare a new entry for ramdisk that includes ipty target in
etc.hp300/MAKEDEV.conf and use it in distrib/hp300/ramdisk/Makefile.
See also PR/46812, PR/47123, and PR/47774.
We could simply add "ipty" to MAKEDEVTARGETS as miniroot/Makefile does,
but it's better to shrink ramdisk size as much as possible.
Should be pulled up to both netbsd-6 and netbsd-6-0.
2013-04-28 08:08:03 +00:00
ecb06a3b09
Add build glue for libc++.
2013-04-27 23:02:17 +00:00
12dfab37e0
Add MKCOMPAT support for earm
2013-04-27 07:59:09 +00:00
9f57c06d41
- read the root keys from our file
...
- explain what happens if we get clock skew
2013-04-25 20:28:05 +00:00
2bc201008f
Provide the root keys for dnssec and advise on how to make this work.
...
XXX: pullup-6
2013-04-25 17:02:29 +00:00
261f2631c7
Add powerd=YES in default. It's recommended for a power switch on x68k.
2013-04-21 08:47:28 +00:00
a33513dc62
don't attempt to create interfaces that exist and don't hide errors.
2013-04-20 18:24:18 +00:00
cb2a012804
Add spiflash device to MAKEDEV template and MAKEDEV config on evbarm.
...
Obtained from Marvell, Semihalf.
2013-04-20 11:41:51 +00:00
5441b5c8c7
Match all the arm machines to get the majors.arm32 file
2013-04-14 13:47:37 +00:00
79d4c5e554
Find the right majors files for earm*
2013-04-12 12:30:18 +00:00
e290c24aa3
Add a makedisk_p12high, used by VAX now after unbumping MAXPARTITIONS from
...
16 down to 12.
2013-04-11 19:13:46 +00:00
0321fc22c0
add event2
2013-04-11 17:51:04 +00:00
434b2461fb
Don't print warning even if mkisofs is not found.
2013-04-06 13:00:31 +00:00
3357f1920b
It helps being able to read - move if_athn entry to the proper directory
2013-03-30 18:14:50 +00:00
a809000618
Add if_athn firmware directory
2013-03-30 17:31:54 +00:00
6d5c5ede57
create audio devices
2013-03-24 14:03:54 +00:00
aa6ebcd0e2
Add KUROBOX_PRO as an EVBARM_BOARDS member.
2013-03-23 11:51:47 +00:00
1386c00816
new test directories
2013-03-21 19:17:51 +00:00
bbce2f06df
PR/47678: Dr. Wolfgang Stukenbrock: remove local iscsi entry which conflicted
...
with the iana assigned one. This port has been assigned to iscsi-target.
2013-03-21 17:45:03 +00:00
77e3515ae2
fix ALL_KERNELS handling
2013-03-21 15:16:43 +00:00
4daade7385
Add a new installer image for Raspberry PI to evbarm
...
Includes the following major changes:
1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.
Much of the sshramdisk code could be reused on other ports easily.
2013-03-19 22:16:52 +00:00
b36c60d9c0
Handle ALL_KERNELS selection
2013-03-17 12:19:57 +00:00
801939b819
fix typo
2013-03-12 20:22:00 +00:00
36d75e6825
new directories for compat npf
2013-03-12 20:01:55 +00:00
7026897f2b
fix typo, from Henning Petersen
2013-03-11 23:17:34 +00:00
c9f0cc4510
mv npf modules to /lib
2013-03-10 21:40:05 +00:00
055af6fa83
Record the value of MKATF and MKKYUA in /etc/release.
2013-03-09 14:12:08 +00:00
774aa66633
add missing $, from Petar Bogdanovic
2013-03-08 14:32:12 +00:00
b50b975dbc
PR/47630: Petar Bogdanovic: add ssh_host_ecdsa_key to /etc/mtree/special
2013-03-08 14:31:28 +00:00
12a7d7c6ad
create /dev/vchiq
2013-03-08 12:33:25 +00:00
e240adbd0b
Retire OSI network stack. OK core@
2013-03-01 18:25:13 +00:00
5e078c9e58
missing comment
2013-02-28 03:04:12 +00:00
ef9b0fbc8a
node for dtrace
2013-02-28 02:00:27 +00:00
48b2f2c970
Add new directories for kyua-atf-compat.
2013-02-25 00:31:51 +00:00
47840f72d0
Install a kyua.conf file that sets unprivileged_user to _tests.
2013-02-24 03:06:13 +00:00
edcb14a44e
Install kyua-testers' distribution documents.
2013-02-23 14:58:11 +00:00
89e4f17129
Register directories and files provided by kyua-cli.
2013-02-23 14:18:36 +00:00
af236c8c4f
refresh from IANA
2013-02-22 03:42:06 +00:00
93170f635e
Use HOST_SH to run scripts. Makes mkimage work on SunOS.
2013-02-21 15:13:10 +00:00
178a6ef2ca
Move INTEGRATOR_CP from EVBARM_BOARDS to KERNEL_SETS so an
...
INTEGRATOR_CP_INSTALL kernel isn't required.
2013-02-20 09:03:41 +00:00
5c97965224
Add support for the ARM Integrator/CP from Sergio López.
...
The code hasn't been tested on real hardware, but INTEGRATOR_CP config
is useful for QEMU which supports it.
2013-02-19 10:57:09 +00:00
dbf5b53da3
Enable the build of kyua-testers and register its files and directories.
...
This is conditional on MKKYUA.
2013-02-19 06:06:39 +00:00
7d3a48f1d2
Hook Lutok into the build. This is all protected by the MKKYUA guard.
2013-02-16 21:40:05 +00:00
8f212f1945
Move tests for examples from tests/examples to tests/share/examples.
...
This is to match the layout of the installed and source files more closely.
While doing this, honor the MKSHARE variable, as the files these tests
validate are only installed when MKSHARE=yes.
2013-02-16 12:44:25 +00:00
87aeb26f19
Avoid //
2013-02-13 04:22:36 +00:00
73e86066b1
fix output filename for __mkimage macro
2013-02-10 22:03:49 +00:00
85a061f852
fix rpi kernel path, defer image building until after release target is done
2013-02-10 21:36:31 +00:00
fd70e2e194
avoid dup kernel
2013-02-10 20:25:56 +00:00
6975538bda
add beagleboard
2013-02-10 16:40:21 +00:00
84874dc42c
always use ${MKNOD} for consistency
2013-02-10 14:54:33 +00:00
158210c439
pass more tools down.
2013-02-10 14:26:32 +00:00
96add05603
Follow a different approach to install the kernel and compress the image.
2013-02-10 01:24:40 +00:00
f73dde4fda
get the kernel from the release directory.
2013-02-09 20:47:06 +00:00
02bfcabc8d
merge back changes I undid
2013-02-09 18:59:19 +00:00
8070b25e81
hook image building for rpi.
2013-02-09 18:49:55 +00:00
df473aee24
PR/47540: Felix Deichmann: DSA keys can only be 1024 bits.
2013-02-07 19:32:19 +00:00
6c17c16f94
build the armv5t, armv6 and armv7 kernels for earm but only the v6 and v7
...
for earmhf.
2013-02-06 01:31:55 +00:00
4c0c51981c
Only include debug set obsolete set if MKDEBUG is not no
2013-02-05 16:39:26 +00:00
2947c6f2d5
Add earmhf support
2013-02-05 07:34:07 +00:00
ea2a4e9bad
Add debug to the list of OBSOLETE_FILES
2013-02-05 07:32:44 +00:00
b1d97a6429
Make custom "reload" target work. Before this fix it would have tried
...
to send a HUP signal to "wpa_supplicant" instead.
2013-02-01 13:29:33 +00:00
80695a814b
spwd.db should be 0600 (Brooks Davis)
2013-01-29 20:21:02 +00:00
162b6b9919
The console major number is not always 0; when creating a temporary
...
console while populating a memory disk, use %CONSOLE_CMAJOR% instead
of 0, and let MAKEDEV.awk substitute the appropriate machine-dependent
major number.
This fixes a bug that I introduced in revision 1.82 dated 2007-03-11.
2013-01-26 18:44:21 +00:00
fa9d9d71df
Update LLVM/Clang snapshot to r172366. Catch up with the move past 3.2
...
release.
2013-01-23 15:02:52 +00:00
e6e5cc51b8
Support a release build restricted to ALL_KERNELS. This file was missed
...
by the first commit.
2013-01-14 20:05:42 +00:00
bf86f39b04
Add an entry for wscons ttyE0.
2013-01-14 09:23:45 +00:00
a91aefab1f
Tweak ramdisk devices.
...
- create sd2 and sd3 for external SCSI disks on LUNA-II
- ipty (2 ptys) is enough for sysinst rather than opty (16 ptys)
2013-01-14 09:15:57 +00:00
281a5e1fdb
Add ppp=YES variable. Currently pppd(8) starts automatically if ppp_peers
...
is not empty. Adding a ppp variable allows the default peer to be set,
and ppp set to NO so that dialing can happen with /etc/rc.d/ppp onestart.
Default set to YES so that old behaviour is preserved.
http://mail-index.netbsd.org/tech-userlevel/2012/08/21/msg006656.html
2013-01-13 18:47:57 +00:00
9dc19ed03b
Nix `-b 1024' from ssh_keygen_flags in /etc/defaults/rc.conf.
...
No objections on tech-security:
http://mail-index.NetBSD.org/tech-security/2012/09/03/msg000548.html
The security of generating keys at boot remains questionable, but
this change makes that no worse.
2013-01-11 04:32:41 +00:00
5c014ba1cf
Create a plcom0 device node for RaspberryPI
2013-01-10 13:38:37 +00:00
43eb4b820e
D.ROOT-SERVERS.NET changes IPv4 address.
2013-01-08 11:15:49 +00:00
191ca062bf
add a sync to make it less likely to boot with /etc pointing to nothing after
...
a crash.
2012-12-31 23:21:27 +00:00
7c8b13934d
better messages, more quoting.
2012-12-29 22:15:07 +00:00
93a9300055
add entries built for MKDEBUG and MKDEBUGLIB to the set lists
...
Thanks to Hisashi T Fujinaka <htodd@twofifty.com> for pointing out the gap.
2012-12-18 22:45:12 +00:00
448aa50d4c
Reinstate the dirname invocations that were recently removed from
...
rc.d/random_seed. The new dirname shell function provided by rc.subr
will be used, so it should work before the /usr file system is mounted.
This should fix a problem in which the fs_safe shell function failed when
passed the name of a file that did not exist.
2012-12-17 18:20:50 +00:00
532fa0d9ae
Add shell implementations of basename and dirname to rc.subr. They
...
are supposed to mimic basename(1) and dirname(1), except that they
are usable before /usr/bin is mounted.
2012-12-17 18:17:27 +00:00
c755e023f2
Avoid using programs from /usr/bin. This should fix PR 47326.
...
- no need for "dirname", because "df -G" can take a file name directly.
- replace use of "awk" with a shell while read loop.
- replace use of "stat -s" with "ls -ldn".
- no need for "tail" now that the use of "stat" has changed.
While here, also add some shell quotes and improve the grammar in a comment.
2012-12-14 18:42:25 +00:00
0450412e67
Revert previous.
...
At the least, it was committed with the wrong commit message.
2012-12-13 21:51:52 +00:00
8c91938135
Add a pidfile and the reload command.
2012-12-13 15:51:17 +00:00
0d6a8650f8
Make the compat libs of npf extension shared libraries go to the
...
compat directories instead of overwriting the arch native libs.
Also, make sure the compat directories get created. Tested on amd64.
2012-12-09 22:06:21 +00:00
4d6ed13889
Make sure that ntpd creates a pid file for the rc machinery to work.
...
http://mail-index.netbsd.org/current-users/2012/11/19/msg021518.html
2012-12-04 16:38:40 +00:00
3e31590ff0
Add src/etc/Makefile.params, containing the definition of the
...
RELEASEVARS variable, and commands related to printing the values of
the variables whose names are in RELEASEVARS.
Add an awk script to remove noise printed by "make -j" or high levels
of MAKEVERBOSE, so we get only the variables names and values. The
values are escaped so that variables containing embedded newlines,
quotation marks, and backslashes, are passed through safely.
Adapt src/etc/Makefile and src/Makefile to use the new ${PRINT_PARAMS}
command defined in src/etc/Makefile.params.
Now ${DESTDIR}/etc/release and the params file in the top-level
.OBJDIR should never contain unwanted noise, even after a build with
MAKEVERBOSE=4.
2012-12-03 13:53:28 +00:00
a23dfbdc09
Adjust for usr/tests/lib/libc/c063 debug entries.
2012-11-23 08:36:47 +00:00
7feb2e8135
Also give install a place to put the atf tests for netpgpverify
2012-11-20 15:41:43 +00:00
7e4aef559e
Fix the build - give install a place to put verify.h !
2012-11-20 15:02:44 +00:00
a76c1cc17f
Add most system calls for POSIX extended API set, part 2, with test cases:
...
faccessat(2), fchmodat(2), fchownat(2), fstatat(2), mkdirat(2), mkfifoat(2),
mknodat(2), linkat(2), readlinkat(2), symlinkat(2), renameat(2), unlinkat(2),
utimensat(2), openat(2).
Also implement O_SEARCH for openat(2)
Still missing:
- some flags for openat(2)
- fexecve(2) implementation
2012-11-18 17:41:51 +00:00
00ed5c3931
We don't need to include <bsd.prog.mk> to install a few config files
...
just <bsd.files.mk> and <bsd.links.mk> is enough.
Noticed because <bsd.prog.mk> sets LINKSMODE to BINMODE and that does
the wrong thing at least for unprivileged builds.
2012-11-17 23:08:38 +00:00
a02a44ee48
Adjust for tests/lib/{libbpfjit,libsljit} debug entries.
2012-11-12 09:03:52 +00:00
062bf78a84
Build libbpfjit test to the build.
2012-11-11 17:41:31 +00:00
5f5f1a05cc
Cause /etc/rc.d/random_seed to be the first script to run
...
after mountcritlocal. Everything else that runs after
mountcritlocal depends directly or indirectly on bootconf, so
making random_seed run before bootconf has the desired result.
2012-11-10 15:10:22 +00:00
e36b9f4a97
Make /etc/rc.d/ttys run after /etc/rc.d/bootconf.sh,
...
because bootconf could conceivably change /etc/ttys.
2012-11-10 15:08:36 +00:00
ffd8736098
Build sljit test when MKSLJIT != no and set MKSLJIT to yes on amd64 and i386.
2012-11-05 00:57:39 +00:00
acfd2b168d
motd needs to be re-generated when DISTRIBVER changes, so change he
...
Makefile to use the new ${_NETBSD_VERSION_DEPENDS} mechanism defined in
bsd.own.mk.
Rename the default motd file in the source tree from "motd" to
"motd.default", because otherwise it would conflict with the motd file
that is now created in the .OBJDIR.
2012-11-04 11:09:14 +00:00
040e0f875d
Add DISTRIBVER to the list of variables under RELEASEVARS.
2012-11-04 11:04:10 +00:00
a015b2b8c4
print something before sleeping so that a user like me can see
...
what the mysterious pause is.
2012-11-02 08:36:13 +00:00
578c31536d
catch up with npfctl moving to /sbin.
...
untested, but i guess so was the move itself ;)
2012-11-01 06:06:14 +00:00
410421ee21
Avoid using glob patterns that might match enough files to give
...
"Arg list too long" errors. Change the "find" command to use
"-exec ... +" instead of "-exec ... \;" to make it more efficient.
2012-10-24 21:23:55 +00:00
d5c3f2d0b1
Add the next three /dev/pci nodes.
...
Marvell Orion already exposes two.
2012-10-13 01:13:59 +00:00
b1203a9851
Make mandb path configurable. makemandb (and related tools) use
...
the path from the _mandb variable from man.conf now.
Set _mandb in man.conf to same value as was used before.
From Abhinav Upadhyay <er.abhinav.upadhyay@gmail.com>.
2012-10-06 15:33:59 +00:00
d60db5e056
PR/47024: Taylor R Campbell: handle "keys" directory and directory
...
permissions in general
2012-10-01 18:46:43 +00:00
35b7579ba4
add more sd and pci devices.
...
remove duplicate ch0.
2012-09-23 01:15:17 +00:00
f2b31f39d0
Add a pass-through ioctl for mfi(4), allowing userland to send raw commands
...
to the controller. This is compatible with the linux and FreeBSD
implementations.
Add the needed conversion for mfi ioctls in COMPAT_LINUX
Allocate a character major number, and create /dev/mfi0 by default
on amd64 and i386.
This allows (along with a hand-created /emul/linux/proc/devices file)
to run the MegaCLI linux binary provided by LSI.
2012-09-19 21:24:28 +00:00
2d427fcfd7
Add ./usr/libdata/debug/usr/lib/npf for rmind
2012-09-18 15:12:31 +00:00
9ee81fc63b
- Add OPENRD.
...
- Compile BEAGLEBOARD_INSTALL.
2012-09-17 15:37:33 +00:00
94cf4e2062
Add /usr/lib/npf.
2012-09-16 16:15:29 +00:00
e8e9f65b79
New test directory for npf
2012-09-12 14:07:10 +00:00
647d3a97c1
Make the "init" target create optys as well - those were removed from "all",
...
but we still need them in emergency setups and some install media.
Should fix PR install/46902.
2012-09-05 08:25:53 +00:00
982f691177
Add BCM5301X
2012-09-01 02:03:35 +00:00
47aef1fbf4
Add lots more ldN dkN
...
Add drvctl to md
2012-09-01 01:45:17 +00:00
c9ea1856a7
Use new makemandb -Q flag to be really quiet.
2012-08-29 20:34:18 +00:00
0ac85cc05d
- fix manet alias to MANET; giving an alias with the same name is a no/op
...
- protocol 84 is defined for as ttp and iptm, merge the two entries since
libc getprotoent() does not read the whole file and merge in the "files"
implementation.
2012-08-28 07:53:45 +00:00
9f498223f2
Handle any reports of state changes for INDICATORs
2012-08-27 21:50:19 +00:00
80b30d8cdf
Add placeholder test programs for share/mk files.
...
The main goal of this change is to simplify the further addition of test
cases for the share/mk infrastructure by adding a few placeholder test
programs to the tests tree.
To not leave these test programs empty, I have added a bunch of extremely
simple test cases to them.
2012-08-26 23:03:20 +00:00
1ebd502870
Fresh from IANA
2012-08-25 11:14:33 +00:00
c60c5ec2d8
actually install the new npf examples
...
add examples for a hash table file and a tree table file
add an ID string to host-npf.conf
2012-08-22 06:45:15 +00:00
6b4ba5789b
Seems like all the trendy ramdisks are using "makedev ipty" rather than
...
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue
2012-08-18 00:50:37 +00:00
a727e4697d
Install live images and install images into ${RELEASEDIR}/images by
...
default, to keep all the large files (such as ISOs) together.
2012-08-17 16:59:26 +00:00
7e916bb8a9
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
...
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.
2012-08-16 13:31:24 +00:00
e7e64dcaa1
Build and install t_bpfilter.
2012-08-14 19:13:54 +00:00
79aa9f3662
add fdpass directories
2012-08-13 11:17:43 +00:00
a0fa559338
Don't create BSD style pty nodes by default anymore since ptyfs is mounted
...
by default. Mention that this is a security issue, since it allows pty access
through the old style node.
2012-08-13 08:30:51 +00:00
ba9bed30be
No need to specify nfsd flags anymore. The defaults DTRT.
2012-08-13 08:20:44 +00:00
127e888ae2
Add earm/earmeb changes
2012-08-06 07:51:13 +00:00
3351729a81
only announce fetching vulnerabilities file if we do.
2012-08-03 10:52:46 +00:00
ba9c08beed
Add ub to KERNEL_SUFFIXES.
2012-08-03 09:11:31 +00:00
93654fca4a
Add TWRP1025 and INSTALL_TWRP1025
2012-08-01 05:46:13 +00:00
45c7c05a4b
Call `makemandb -f -q` instead of `makemandb -f`, as Edgar Fuß proposed for daily.
2012-07-31 12:11:50 +00:00
778f4384b4
PR/46757: Check for fetch_pkg_vulnerabilities unset first.
2012-07-31 09:23:09 +00:00
890333e6c9
Call `makemandb -q` instead of `makemandb`, as proposed by Edgar Fuss on
...
tech-userlevel on 20th of July 2012, 12:38.
2012-07-30 22:13:38 +00:00
da43ca12af
PR/46757: Edgar Fuß: Change default to pkg_vulnerabilities from NO to unset,
...
and make unset insted of NO to produce warnings, so that setting it to NO does
produce warnings (if it is inappropriate for the machine to warn about this).
2012-07-30 17:09:33 +00:00
e763a079db
PR/46756: Edgar Fuß: Enable ignoring subdirectories in daily's find_core
2012-07-30 17:06:51 +00:00
734339d201
Add testcase for PR/46743
2012-07-28 16:08:39 +00:00
b6cf8ec026
Add RPI to KERNEL_SETS
2012-07-26 20:50:44 +00:00
c91c5846f7
+ /usr/tests/usr.bin/nbperf
2012-07-22 21:04:44 +00:00
bdb2cc007b
MKCRYPTO_{IDEA,MDC2} is no more
2012-07-14 04:01:11 +00:00
fd0228cf47
Also build WSCONS kernel.
2012-07-09 18:12:11 +00:00
f9669c1ea4
It's msdos, not msdosfs.
2012-07-08 14:25:49 +00:00
40d2eec2c6
Disable GENERIC_USERMODE kernel auto-build to avoid problems with the current
...
autobuild-system.
2012-07-04 13:54:20 +00:00
da54453f2c
Ensure the ramdisk has bpf for dhcpcd
2012-07-04 08:03:08 +00:00
bd1c4855ff
All apply to vax only:
...
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)
2012-07-03 21:49:55 +00:00
e631798833
Move i386 and amd64 usermode configurations to their respective directories
...
and make the usermode kernels buildalbe under build.sh.
The resulting kernels are build and packaged correctly as are the associated
modules.
2012-06-30 15:03:56 +00:00
690d3837f6
add ldpd rc.d script here too
2012-06-28 16:34:06 +00:00
cb9b109d3a
do as sparc64 does and switch the default terminal type to wsvt25
2012-06-26 02:05:43 +00:00
55657a2741
PR/46601 - Jim Bernard -- add support for rc_directories
2012-06-25 07:22:45 +00:00
351c7b5d8f
- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
...
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number
2012-06-22 20:42:22 +00:00
a1f0720d45
Add raid0 to init), in case we have /tmp on mfs.
2012-06-21 19:22:07 +00:00
ef11cb81d1
Add directory for usr/include/dev/filemon/
2012-06-21 04:30:04 +00:00
b1d94e60d6
Remove unnecessary checkyesno which I commited before.
...
${rcvar}_start is skipped if rcvar is not set to YES.
Pointed out by joerg@ and tsutsui@.
Should be pulled up to netbsd-6.
2012-06-17 02:13:13 +00:00
c9196b81ce
Update LLVM/Clang snapshot to r158533. This brings in support for
...
stack-realignment in functions using alloca on x86. Move to
/usr/include/clang-3.2 to reflect the version.
2012-06-16 17:01:02 +00:00
25290a5966
Set commented out maxproc-cur and openfiles-cur default values to the actual
...
defaults from sys/sys/syslimits.h. Bump maxproc-max too to a typical value.
2012-06-14 09:28:02 +00:00
49449523c7
Add firmware for the RealTek RTL8192CU family of wireless chipsets, and
...
adapt the urtwn(4) driver to use the new files. The firmware files were
extracted from the Linux driver at www.realtek.com, version 0005.1230.2011
and the license permits redistribution without modification.
While I'm here, install the files in /libdata/firmware/if_urtwn, like
most of the other network adapter firmware.
urtwn(4) can now operate without needing external files installed. Tested
on my Edimax adapter.
2012-06-14 04:14:35 +00:00
c2e51849fc
Per discussion on tech-userlevel, finally fix PR 10127:
...
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
2012-06-13 20:49:11 +00:00
f28248caf4
Allows you to disable it if makemandb=NO in rc.conf.
...
Thanks tsutsui@ and Yasushi Oshima.
2012-06-12 02:25:29 +00:00
c1004a7836
Add a basic test for infocmp - this would have cought todays terminfo
...
lossage (PR lib/46553).
2012-06-06 21:23:10 +00:00
ac2c5cf13a
Invoke MAKEDEV.local via $HOST_SH (default ${HOST_SH:=sh}) instead of
...
hardcoded "sh" to avoid unexpected errors on cross build hosts in
src/distrib/common/Makefile.makedev etc.
Should fix PR toolchain/46537, ok apb@
2012-06-05 13:20:01 +00:00
1907ec3a61
Switch device database to cdb(5). Rework ttyname(3) and ttyname_r(3) to
...
depend on new devname_r(3) as heart. Add /dev/pts magic directly to
devname(3). While it can lead to returning non-existing paths, the
behavior is more consistent that way. Drop caching layer in devname(3),
it doesn't buy anything for the common case of having access to the
database. Teach devname(3) proper fallback behavior of scanning /dev.
Create both old-style and new-style database for now in /etc/rc.d/sysdb.
2012-06-03 21:42:44 +00:00
44184cf8bf
PR/46521: Jim Bernard: remove duplicate -o
2012-06-02 15:52:24 +00:00
c9051a9fd6
Use /libdata/firmware/run instead of /libdata/firmware/rum for run(4) firmwares.
2012-06-01 13:19:38 +00:00
f1b12ec580
Add new test directory
2012-05-27 23:03:24 +00:00
3debe0af82
Create /dev/iscsi0 as part of 'all'.
2012-05-26 00:36:15 +00:00
bc77bb37cd
Add a GENERIC.MP kernel config and add it to the build list so that it
...
gets build tested.
2012-05-23 08:19:40 +00:00
af62c3b4d8
Add a test case for PR kern/46463. From Richard Hansen.
2012-05-18 15:25:25 +00:00
7591311640
Add the ability for staticroute to evaluate lines from /etc/route.conf
...
as shell script fragments, add example to the route.conf man page of
evaluating variables.
Remove route.conf man page statement that staticroute is enabled in
rc.conf since that's incorrect.
Wrap the staticroute while in parens, per <apb> & <christos>, and
quote all the arguments for the evals.
2012-05-02 15:57:15 +00:00
0ffe024507
Update entries for proper PSX16550 com port device names.
2012-04-29 07:21:10 +00:00
058310c688
Create ttyC0 and ttyC1 for PSX16550 com ports.
2012-04-29 07:19:08 +00:00
a1da65bdfb
Change root's default shell to /bin/sh, to provide a default which
...
has command line editing, tab completion, and other features users
have come to expect from a modern OS.
Discussed on current-users approximately two weeks ago. Should be
pulled up for NetBSD 6.0.
2012-04-25 16:11:26 +00:00
c7358053ef
Add a test case for PR bin/39546.
2012-04-19 18:51:35 +00:00
0953dc8744
Add a test case for PR kern/46328 (tested naively with tcpdump(8)).
2012-04-14 12:21:45 +00:00
df3c343ded
Revert previous - k_helper3 does not get installed in a subdirectory.
...
Doing it this way will prevent us from creating the subdirectory on
non-MODULAR systems. That would have caused a build break due to the
unexpected empty directory.
2012-04-14 02:48:44 +00:00
04ec1fc554
Create the directory for the helper program; hopefully fixes the build
...
break.
XXX It's odd that k_helper3 needs to have its directory pre-created, when
XXX k_helper, k_helper2, and k_uvm don't need it...
2012-04-14 00:14:22 +00:00
5ba1ea26d4
fix use of setenv in a comment, noted by "stu314" on freenode.
2012-04-10 19:02:30 +00:00
23fb23b458
Gracefully shutdown upon reaching critical temperature levels. Prevents few
...
laptops (ThinkPad T61 and x61s, among others) from hitting the in-CPU reset.
2012-04-10 13:58:52 +00:00
850b856e4a
back out change that makes onestart work, to be committed at some other time.
2012-04-07 17:28:44 +00:00
05e9a23818
give wedges to everyone
2012-04-07 17:22:10 +00:00
f932526a86
The error message when /var is not a file system chhanged from
...
mount: unknown special file or file system `/var'
to
mount: Unknown special file or file system `/var'
so match them both.
2012-04-07 16:39:32 +00:00
c6302b7410
change security so that there is a configuration value for the list of
...
users who will not be considered for duplicate uid check.
Seed it with 'toor' in defaults/security.conf.
2012-04-05 09:09:27 +00:00
47dea51ec6
Add regression tests for PR bin/3914 and PR bin/27140.
2012-03-30 09:27:10 +00:00
651e2c6948
Add regression tests for the 1990s bugs PR bin/3538 and PR bin/4841.
2012-03-27 08:16:33 +00:00
db4c04c984
Added urtwn(4), a driver for Realtek RTL8188CU/RTL8192CU USB IEEE 802.11b/g/n wireless network devices.
2012-03-25 00:11:16 +00:00
327776ba0b
Add regression tests for PR bin/12424, PR bin/12316, and PR bin/14253,
...
all fixed long time ago.
2012-03-20 06:18:33 +00:00
d0df4f4862
Adjust to unbreak mkdebug build.
2012-03-19 11:16:36 +00:00
3a662fafc9
Add regression tests for PR bin/2642 and PR bin/23836, both fixed long ago.
2012-03-19 07:05:18 +00:00
1ff69b68e3
Add a case for PR bin/44973.
2012-03-18 12:40:42 +00:00
0498995f9f
Add a test case for PR bin/28126. Does not fail with GNU sed.
2012-03-18 10:12:30 +00:00
840bc631fa
Adjust set lists and mtree.
2012-03-17 17:16:41 +00:00
2fb9c76e0d
Adjust set lists and mtree.
2012-03-17 16:35:02 +00:00
87ec685886
Disable generation of boot floppy images for sparc, which do not fit on
...
floppy disks anymore, to unbreak the build (for now).
If someone feels like adding and testing ustarfs support in the floppy
/boot, please reenable again.
2012-03-14 13:26:43 +00:00
869580eb48
Adjust set lists and mtree.
2012-03-11 18:45:19 +00:00
7a324bfe36
Point first to 6.0 packages, then to packages for 5.1 or 5.0.
...
The latter have reduced usefullness in -current or netbsd-6 until
we have a compat50 package.
2012-03-11 17:28:47 +00:00
50de5b0f94
Can't use Bourne shell syntax here... (Even in comments, for PKG_PATH.)
2012-03-11 17:23:55 +00:00
c513c5c06e
add awk test directory
2012-03-10 19:11:36 +00:00
4e4e8d92ec
Quoting sys/dev/vme/files.vme commit log: "vmegeneric never saw the
...
light of the source tree. After 7 years, I guess nobody missed it."
OK by wiz@
2012-02-25 10:55:27 +00:00
yamt