be326c54fe
Add pcmcom driver and com slaves.
1998-10-10 21:58:22 +00:00
d208510692
Add support for AdvanSys Ultra Wide boards
1998-09-26 16:38:43 +00:00
29a84ea0ac
UVM+PMAP_NEW is standard now; don't need it in individual config files.
1998-08-31 17:58:44 +00:00
df94d3f4f5
Add AdvanSys SCSI controller
1998-08-26 14:27:44 +00:00
cf231bf251
Adapt to MII changes.
1998-08-11 00:28:53 +00:00
f150e8645e
NORVEGIAN -> NORWEGIAN
1998-07-27 23:55:23 +00:00
7c050065fd
Correct indent.
1998-07-27 18:42:27 +00:00
11245c76f7
Ops, forgot FINNISH_KBD.
1998-07-27 18:38:07 +00:00
82370f62b3
Document FRENCH_KBD,GERMAN_KBD,NORVEGIAN_KBD options.
1998-07-27 13:39:51 +00:00
fca2dc28ac
Add cs0 at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:51:29 +00:00
75da3d4eaa
add device declarations for 'puc'-related devices. Add lpt attaching
...
to puc to the files file, because it can't go in files.pci (see comments
here or there).
1998-06-26 18:58:38 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
e33ef0027d
Remove TAB after `options I686_CPU'.
1998-06-07 02:34:41 +00:00
7022024d4a
Add epic* at pci?
1998-06-02 01:43:33 +00:00
4519b25f6c
Add options COMPAT_386BSD_MBRPART.
1998-05-31 13:53:42 +00:00
92b545d880
There are NE2100 compatible cards which cannot IRQ 10.
...
Use IRQ 9 in the default configuration.
(Thanks to Rick Byers <rickb@iaw.on.ca>.)
1998-04-20 10:58:01 +00:00
6af8040a5c
-"spkr" now attaches to "pcppi"
...
-"le at isa" is split into "depca", "nele" and "bicc"
1998-04-16 22:01:41 +00:00
6821ff25c2
Add entry for aic* at isapnp.
1998-04-03 04:35:05 +00:00
c95ab20c4a
Add entry for mbe* at pcmcia.
1998-04-03 04:29:13 +00:00
b1b3597d5e
Add entries for ate0 and fmv0 (former is tested but latter is not).
...
Remove fe0.
1998-04-03 04:23:50 +00:00
db80fc3242
The "pckbd" attribute of pc/vt is now "pckbcport".
...
Use the real console driver name here to make more obvious where
pms and spkr attach to.
1998-03-22 18:18:45 +00:00
1918ca1e5b
Change ie[01] to ef, ai, and ix so that these kernels can be used again.
1998-03-01 20:45:26 +00:00
30a584067f
remove paging options from kernel files.
1998-02-06 11:20:27 +00:00
b16f0280e3
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 07:53:26 +00:00
29e93b8bea
add the i386 MD portions for UVM.
1998-02-06 07:21:42 +00:00
d6e5187749
add 'sd* at atapibus? drive ?' to all kernel configs already containing
...
an analogous line for 'cd'.
1998-01-15 02:26:26 +00:00
09354842c5
from Dave Burgess per PR4620:
...
-base address 0x308 is supported by more Wangtek QIC tapes than 0x300
-Ultrastor ISA SCSI adapters can't be set to base address 0x334
(changed to 0x340)
1998-01-14 15:27:43 +00:00
4ee07a6d65
Revert I486_PCI_MEM_ENABLED change, it caused too many problems.
1997-11-27 09:58:26 +00:00
e85ad99e57
Add COMPAT_13.
1997-11-25 20:29:24 +00:00
2524b071e8
Add commented-out "I486_PCI_MEM_ENABLED" option, and describe it.
1997-11-24 00:21:48 +00:00
f56e6f631f
Add an i/o address for iy0 (from GENERIC)
1997-11-17 03:42:52 +00:00
9246032610
Put lc0 at i/o 0x320.
1997-11-17 03:39:42 +00:00
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
6fcc8cd8b1
Add locators for "eg0" device, and enable it.
1997-11-11 05:53:06 +00:00
51460546c8
Add sm0 at isa? port 0x300 irq 10
1997-11-05 18:13:10 +00:00
4436625795
Delete "ed" driver, add "we".
1997-11-03 21:33:33 +00:00
540caf5a8f
Add "ec" driver.
1997-11-02 01:02:23 +00:00
135737c189
fix some typos and other misfeatures in comments; no functional change
...
note that bha driver supports BT44x cards as well
1997-10-23 05:49:42 +00:00
d29eab51f1
Correct spelling of 'ThunderLAN'
1997-10-21 06:01:16 +00:00
75473a6379
we don't need FDESC
1997-10-20 20:03:04 +00:00
32b7029647
Mark options RND_COM as broken on i386 port
1997-10-20 18:45:09 +00:00
9d0579d2fb
Comment out pseudo-device rnd, mention options RND_COM, and mark experiemntal
1997-10-20 15:19:51 +00:00
83a4427110
Sync with GENERIC; comment out a few more unneeded things.
1997-10-20 03:42:43 +00:00
b07dc2077e
typo: that -> than
1997-10-19 00:00:18 +00:00
1adb3a7a9d
Sync with GENERIC.
1997-10-18 02:01:36 +00:00
10e68aaed1
Add tl and mii devices.
1997-10-17 19:25:36 +00:00
113f376554
Use TAB to separate `cd*' and `at'.
1997-10-17 07:07:26 +00:00
005a9c192c
Add ISA and PCI "ne" instances as appropriate.
1997-10-14 23:30:55 +00:00
4d36fbdfa1
Clump USER_LDT with other CPU-related options.
1997-10-08 10:09:36 +00:00
a9f50348ae
Update comments regarding BIOSEXTMEM (now REALEXTMEM), and add REALBASEMEM.
1997-10-08 09:32:36 +00:00
thorpej