lukem
38cd7942e5
- add no_parseopt(), no_setboot() and no_clearboot() methods for back-ends
...
to use when they don't support a particular method
- don't automatically generate machines.c anymore
- add entries for i386 (temporarily unsupported) and shark
(permanently unsupported)
2002-04-11 07:56:13 +00:00
martin
81bc5473a1
Fix a stupid bug when setting authentication for multiple PPP interfaces.
...
Add some magic to UP/DOWN interface using ISDN on startup/exit and a
configuration entry (autoupdown=yes/no) to prevent this.
2002-04-10 23:35:07 +00:00
enami
c7fb252eba
- Don't assume that /usr is available. Fixes (one of?) ``fgrep: not found''.
...
- Don't append ``dot'' when restoring resovl.conf.
2002-04-10 10:11:41 +00:00
bjh21
dd9c5ed338
Don't use __RCSID unless it's defined.
2002-04-09 19:17:11 +00:00
jdolecek
7ddad9fe53
ignore potential error return from rm -rf results
...
this fixes part of misc/16227 by Stoned Elipot
2002-04-09 17:17:24 +00:00
thorpej
a819d2296f
Use __RCSID() and __COPYRIGHT().
2002-04-09 02:56:17 +00:00
thorpej
2597d53f5a
Use __RCSID().
2002-04-09 02:35:31 +00:00
thorpej
2e5904a52c
Need <string.h> for memcmp().
2002-04-09 02:06:29 +00:00
ad
4cb07f9024
Sync the firmware version report with mlx.c. Addresses PR 14155.
2002-04-07 20:18:01 +00:00
ad
b55ddcdfc4
Fix -a: correctly verify which disks belong to the current controller, and
...
print a more informative message if we don't find any. Addresses part of
(already closed) PR 14086.
2002-04-07 20:02:18 +00:00
bjh21
8a4f44d684
Install the compat symlink into ${DESTDIR}.
2002-04-06 15:27:55 +00:00
bjh21
de69a8cbe5
Don't install the compat symlink if this is a HOSTPROG.
2002-04-06 13:59:12 +00:00
dsainty
6533347de2
Fix trivial typo
2002-04-06 03:17:47 +00:00
martin
1ec36d3e93
Allow configuration entries that don't hardcode a specific BRI.
...
Fixes PR 15919 by Matthias Scheler.
2002-04-05 15:26:59 +00:00
lukem
c81588447f
Add framework for adding compat symlink from /usr/mdec/installboot ->
...
/usr/sbin/installboot.
Enable pmax.
2002-04-04 23:01:38 +00:00
lukem
6f15862d50
enable installboot, since it's now useful for at least a couple of ports
2002-04-04 22:07:35 +00:00
bjh21
33ce139ee0
Pull in config.h as necessary to get byte-order macros etc.
2002-04-04 17:53:04 +00:00
mrg
4cf62149f5
be sure to pad the bootblock.
2002-04-04 15:36:44 +00:00
mrg
96adf034f8
clean up a bit, use fewer magic numbers.
2002-04-04 15:17:34 +00:00
mrg
5b7f1cce2d
LP64isms. also, be sure to use <string.h> if we use memset or memcpy.
2002-04-04 14:00:55 +00:00
lukem
67c2e40115
Add sparc64 back-end, contributed by Matthew Green.
2002-04-04 13:45:25 +00:00
wiz
3b288fe0ef
Mostly typo fixes, some formatting nits.
2002-04-04 11:06:47 +00:00
lukem
9c89a064fd
-n and -v are optional ...
2002-04-04 07:27:44 +00:00
lukem
c1455b1b9a
update description, history, authors, examples, bugs,
...
including pmax specific stuff
2002-04-04 07:24:55 +00:00
simonb
d024fa98e3
Include <limits.h> to explicitly get LONG_MAX.
2002-04-04 03:27:53 +00:00
lukem
9f1d1d933d
don't pull in <dev/sun/disklabel.h> just for SUN_DKMAGIC; instead,
...
provide local copy of that #define.
2002-04-04 00:32:06 +00:00
lukem
06d7c45c38
Add support for alpha, based on {vax,pmax}.c and
...
sys/arch/alpha/stand/installboot.
XXX: not fully tested yet.
2002-04-03 10:21:01 +00:00
lukem
c37fa0cedc
Migrate MD files to arch/ subdir. Suggested by Hubert Feyrer.
2002-04-03 09:09:01 +00:00
lukem
3d78281f15
Add pmax installboot back-end; from vax.c and arch/pmax/stand/installboot/*.
...
XXX: not tested yet.
2002-04-03 06:34:31 +00:00
lukem
36e058bfe4
whitespace foo
2002-04-03 06:29:11 +00:00
lukem
93c03c6edc
replace machines.c rebuild with "regenmachines", which needs to be run
...
manually
2002-04-03 05:58:44 +00:00
lukem
07e4618075
Machine independent "unified" installboot(8).
...
Currently only supports vax, with more MD back-ends to be added RSN.
2002-04-03 05:21:16 +00:00
christos
d3ffde02ce
don't add a search line if the domain name is empty. Pointed out by perry.
2002-04-02 19:16:59 +00:00
christos
93756e61ad
XXX: this code needs a lot more cleanup... There is no clear malloc/free
...
policy and the data dependent initialization is very fragile. I.e.
the code assumes because the data entry is of type foo, it has
initialized certain fields and others not.
- make sure list is not NULL before you use it.
- don't realloc on every loop iteration!
- don't increment i when there are short lines; leads to uninitialized
list[i] entries [fixes bills' core-dump, hi bill!]
2002-04-02 18:59:54 +00:00
christos
3afdbb7d94
XXX: this code has a lot of bugs and needs further cleanup.
...
- don't allocate:
char *p = malloc(len * sizeof(char *))
when you mean:
char *p = malloc(len)
- eliminate duplicated code by creating functions and try not to wrap
- use mvwinnstr instead of mvwinstr
2002-04-02 18:57:01 +00:00
christos
1f44bd39de
- don't trash the old resolv.conf.
...
- say that we generated it and when.
- unfortunately we cannot restore it back, since dhclient does not call us
when it exits.
2002-04-02 17:39:47 +00:00
ichiro
56d2b07be1
fix channel list to be 1-14.
...
txrate parameter value determines the rate at which the
Probe request frames will be sent.
bit0 1Mbps
bit1 2M
bit3 5.5M
bit4 11M
2002-04-02 16:59:14 +00:00
agc
5e5f49ecfa
Check the return code from the second invocation of installprereq(), to
...
make sure that a failed installation of a rpe-requisite package kills
the attempt to add the package. This reverts pkg_add(1) to traditional
behaviour.
Bump version number accordingly.
2002-04-02 15:08:33 +00:00
agc
3387a6a54e
Do the previous differently. Run through the possible ranges for uids in
...
the command line order, then check the default range after that, if none
has yet been found.
Prompted by Brian Poole <raj@cerias.purdue.edu>.
2002-03-31 21:31:10 +00:00
martin
ac4b5b6e98
Initialize the D-channel protocol for cards attaching new.
...
If the kernel passes number type/plan for incoming calls, log the type
(e.g. "national" or "international").
2002-03-30 07:12:41 +00:00
jmc
1347ab1b90
Remove check for sparc64 which adds -msoft-quad-float as that is now the
...
default for the compiler on sparc64.
2002-03-28 09:58:09 +00:00
martin
ae7fd2a68d
Make isdnd deal with attaching/detaching controllers and non-continous
...
BRI identifiers. Remove arbitrary, hardcoded limits.
2002-03-27 13:46:34 +00:00
wiz
e5b8ea6058
Fix typo in warning, reported by Tero Kivinen in bin/16055.
2002-03-25 19:55:41 +00:00
martin
6a2e4de618
Don't use hardcoded card type/driver type constants - those have been
...
removed.
2002-03-24 20:37:45 +00:00
heinz
07dc707915
typo
2002-03-23 22:31:36 +00:00
jdolecek
d437ea659d
child_process(): if the input_data didn't contain any '%', the pointer
...
ended up _after_ the final '\0', so the code past though there are some
data to be passed to the spawned command, causing child process
crash under some circumstances; adjust input_data in this case to avoid this
XXX this is already fixed in cron 4.0-b1 (though slighly differently)
2002-03-23 09:38:02 +00:00
thorpej
9c33b55e7c
Split the notion of building Hesiod, Kerberos, S/key, and YP
...
infrastructure and using that infrastructure in programs.
* MKHESIOD, MKKERBEROS, MKSKEY, and MKYP control building
of the infratsructure (libraries, support programs, etc.)
* USE_HESIOD, USE_KERBEROS, USE_SKEY, and USE_YP control
building of support for using the corresponding API
in various libraries/programs that can use it.
As discussed on tech-toolchain.
2002-03-22 18:10:19 +00:00
martti
db91979e36
Added etcupdate
2002-03-22 10:11:05 +00:00
martti
4f077f96a1
Added etcupdate (etcupdate-20020321 in pkgsrc)
2002-03-22 10:10:56 +00:00
wiz
574575c56c
Quote argument to .Nd because it has too many words (9 arguments max per
...
macro). Noted broken by uwe.
2002-03-20 16:18:47 +00:00
skrll
da540a7bd6
Fix typo that caused my ISDN setup to fail. Basically, the connection was
...
being dropped immediately as the ppp-send-auth setting in isdn.rc was
ignored.
2002-03-20 11:39:49 +00:00
martin
e8921b2f97
Fix typo in the local sockets permission mask.
...
Noted by Matthias Drochner.
2002-03-18 22:49:57 +00:00
martin
3c37541fd6
Remove hardcoded driver identifiers.
...
Query the kernel for supported application drivers instead.
2002-03-17 20:57:24 +00:00
martin
ccb433029a
Adapt to call-ID based accounting messages.
2002-03-17 11:09:16 +00:00
martin
093f5dbc55
Rename ISDN devices, per discussion on tech-kern. The network devices
...
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).
2002-03-16 17:03:28 +00:00
martti
30aa77c1c5
Added ip_log.c and few CPPFLAGS flags
2002-03-14 12:34:33 +00:00
hubertf
99e2919b43
Improved error reporting: when a pkg pattern is given, and
...
/var/db/pkg does not exist (e.g. on a new system), say do!
2002-03-12 22:36:26 +00:00
agc
2e8bd5562d
When adding packages via pkg_add(1), and a pre-requisite package needs
...
to be added, first try to use the exact version of the pre-requisite
with which the base package was built (from the @blddep directive in
the +CONTENTS file), and then use the traditional dependency from the
@pkgdep directive.
Also rename a variable from "code" to "errc" to make it obvious what
the variable counts.
Bump version number to 20020306.
2002-03-06 17:45:20 +00:00
martti
c28dc34f7b
Removed g711conv
2002-03-06 08:06:40 +00:00
martin
c212a52a1e
This tool is ~never used in reality.
...
There are far better alternatives in pkgsrc, for example audio/sox.
2002-03-05 22:36:58 +00:00
wiz
10d6eb080d
Drop duplicate .Pp.
2002-03-05 15:09:26 +00:00
pk
5f8328c032
Serialize gram.y -> gram.[ch] transformation.
2002-03-05 15:00:07 +00:00
agc
b66bb2992d
Output @blddep directives properly when displaying PLISTs.
2002-03-05 14:18:07 +00:00
agc
dae19d20ed
Output @blddep directives before @pkgdep directives.
2002-03-05 14:16:11 +00:00
agc
33ef3d651a
Add a new packing list directive, @blddep, which notes the exact
...
version of the pre-requisite package which was used to build the
package. This is derived automatically from the list of pre-requisite
packages which is provided to pkg_create(1) in the -P argument.
Bump the version number to 20020305.
Versions of the pkg_install tools prior to 20020305, when adding a
binary package with embedded @blddep directives, will warn that the
directive is not recognised, but will continue to add the binary
package.
2002-03-05 13:01:19 +00:00
itojun
69881cf6b8
bring in latest ALTQ from kjc.
2002-03-05 04:11:51 +00:00
wiz
33c4414e8b
Remove IPIP reference.
2002-03-04 14:45:48 +00:00
wiz
1b7f309f0a
Correct misspellings of "failed".
2002-03-04 01:38:31 +00:00
dbj
6e4b27cd49
when no access points are available, explicitly state so
...
rather then printing a list heading and nothing else.
2002-03-04 01:28:09 +00:00
dbj
7ec184ce2e
print out channel list as a list of decimal channels rather
...
than as a bitmask printed as a single decimal number
2002-03-04 01:26:58 +00:00
dbj
1d7d73ee19
s/Kusec/msec/
2002-03-04 01:24:53 +00:00
cjep
a8f6b3003d
Fix typo in a comment (from Onno van der Linden; PR#15792)
2002-03-03 18:17:05 +00:00
dbj
aee0e0eba3
use all 4 bytes of result length when scanning APs.
2002-03-03 05:00:03 +00:00
tv
eda273b959
When converting to use getprogname(), please don't forget the necessary
...
companion call to setprogname() for portability.
2002-03-02 03:45:07 +00:00
pooka
9da6188fe8
re-convert to use getprogname(). This was already once done in rev 1.28,
...
but silently killed in rev 1.29.
from John Franklin <franklin@elfie.org> in bin/15771
2002-02-28 22:43:42 +00:00
lukem
a4af05a5cc
provide "gateway" example "file"
2002-02-28 01:19:48 +00:00
mason
3b5b0345cc
Make wording and intent clearer. "Real-world" users have expressed confusion,
...
and the former wording didn't help.
2002-02-27 17:42:41 +00:00
itojun
8e96646992
do not age global address on loopback interface. sync with kame
2002-02-25 02:22:59 +00:00
enami
878dd0cd17
For pstat -f and -t, make header align with actual data on LP64 system.
2002-02-24 02:02:59 +00:00
wiz
56e0213dd1
Whitespace nits and a typo fix.
2002-02-23 17:03:18 +00:00
martin
a290138790
Add more examples.
2002-02-23 08:11:22 +00:00
enami
c4f3ebe67c
Make flag bit to character conversion table driven.
2002-02-23 01:06:41 +00:00
enami
ae68f729ab
Don't use same character for different flags.
2002-02-22 11:25:37 +00:00
agc
1c88ee495f
... and get the right month this time.
2002-02-22 10:13:41 +00:00
agc
a1cbed9f66
Bump version date to reflect this change to create/pl.c:
...
> revision 1.22
> date: 2002/02/18 00:57:54; author: hubertf; state: Exp; lines: +10 -3
> make @cwd work a bit more reliable:
>
> When -L is used (as it is by pkgsrc), don't override the directory
> set by @cwd unconditionally with what was given to -L (srcdir).
> Instead, use the @cwd directory.
2002-02-22 10:10:38 +00:00
enami
dd20cf834b
Use getprogname().
2002-02-22 05:43:20 +00:00
enami
53ada2a18e
Always free memroy allocated by loadvnodes().
2002-02-22 05:21:01 +00:00
enami
c31a571ef9
Forgot to fix header for union/layer vnode.
2002-02-22 05:04:43 +00:00
enami
025015575f
Borrow the macro PRWORD() from vmstat.c and use it. Also, calculate the
...
width of pointer using sizeof(void *) * 2 instead of using 8.
2002-02-22 04:58:39 +00:00
enami
6ac7c9d9d8
No need to use paren here. Actually, the usage was inconsistient through
...
this file.
2002-02-22 04:30:39 +00:00
enami
cbf417a013
- Fix indentation.
...
- Wrap long line.
- Kill unnecessary empty line.
2002-02-22 04:27:30 +00:00
wiz
b6ad50f62e
Restore some changes from before v1.11.
2002-02-21 18:57:44 +00:00
mason
be7a76e49f
document -i and -u in the man page
2002-02-21 17:10:14 +00:00
agc
d0f4ce78c4
Modify the English slightly, and slight format cleanup.
2002-02-21 14:21:49 +00:00
enami
e0e7c0fbcb
- Print number of pages in the vnode.
...
- Recognize VEXECMAP bit in vnode flags.
- Recognize IN_SPACECOUNTED in inode flags.
2002-02-21 10:58:00 +00:00
christos
3e5a9a9d41
Forgot to update this one for the structure prefix changes.
2002-02-21 00:34:31 +00:00
lukem
87899d0b72
inotype() only needs to understand S_ types, not the F_ types
2002-02-19 04:54:12 +00:00
itojun
c38970800e
sizeof pedant
2002-02-19 02:29:58 +00:00
thorpej
ba472566c5
Support Elf32 on VAX.
2002-02-19 02:16:08 +00:00
thorpej
e96b77f08f
Add support for converting Elf32 images on-the-fly into MOP images.
...
(This involved some infrastructure changes to the various mopd
support programs/libraries.)
2002-02-18 22:00:36 +00:00