Commit Graph

127 Commits

Author SHA1 Message Date
nat 03783bb56a Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.
2016-12-08 11:31:08 +00:00
isaki 261f2631c7 Add powerd=YES in default. It's recommended for a power switch on x68k. 2013-04-21 08:47:28 +00:00
abs 7e916bb8a9 Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
  which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.
2012-08-16 13:31:24 +00:00
tsutsui 0ffe024507 Update entries for proper PSX16550 com port device names. 2012-04-29 07:21:10 +00:00
tsutsui 058310c688 Create ttyC0 and ttyC1 for PSX16550 com ports. 2012-04-29 07:19:08 +00:00
isaki 43fa5f922b Clean up pow(4) (which I had removed in Nov 2011). 2012-01-21 02:52:50 +00:00
tsutsui f6bedb7e36 Create sysmon(4) devices. Noticed by Y.Sugahara. 2011-10-11 12:08:20 +00:00
apb f11ca724cb Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl.  There are
also a few instances of slightly different changes in the
case patterns.
2011-09-06 14:40:10 +00:00
tsutsui 063351d547 Device nodes for zs serial have been renamed from tty0[0-3] to ttyZ[0-3].
There are still compat symlinks but it looks ttys(5) doesn't like it.

XXX: no /dev/com[01] nodes for in MAKEDEV.
2011-05-21 11:56:00 +00:00
isaki cf59801230 x68k pow(4) now uses MI sysmon_pswitch framework. suggested by tsutsui@.
- Make MD poffd(8) retire, and use MI powerd(8) instead of it.
- Make /dev/pow1 retire, because nobody holds /dev/pow0 any longer.
  Use /dev/pow0 for pow(4) ioctl.
- POWIOCSSIGNAL ioctl which is for poffd(8) is also obsoleted.
2008-12-20 13:20:58 +00:00
abs 3388ad407f Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
2008-10-07 10:00:00 +00:00
lukem 2c1c2b60b2 Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.
2008-03-18 04:20:36 +00:00
pavel de89ac5321 Add a comment reminding to update the release notes if the list of
kernels change.
2007-07-24 10:49:23 +00:00
hubertf 6a5bb11672 Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@
2007-01-15 23:35:11 +00:00
christos 0553899e97 remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.
2004-06-20 21:30:26 +00:00
minoura d9cff0a9f6 /dev/grf? on x68k must not be accessed without the root priviledge. 2004-01-10 07:17:08 +00:00
lukem fcdfdbba5c Rework MAKEDEV:
*	Use "mknod -F netbsd -r" to create nodes, instead of
	"rm ; mknod; chmod; chown".
	This means permissions & ownership of existing nodes will
	not be changed.
	This is up to 30% faster when populating an empty /dev,
	and nearly 2x faster when re-running on an existing /dev.

    *	New options:
    	-f		force change of permission & ownership of existing
			devices
    	-m mknod	override name/path of mknod program
			(which defaults to $TOOL_MKNOD, then "mknod").
	-s		generate mtree(8) specfile instead of creating devices

    *	Remove /usr/etc from $PATH; not needed anymore.

    *	Provide functions to create devices & directories:
	    mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
		create device node `name' with the appropriate permissions
	    lndev src target
		create a symlink from src to target
	    makedir dir mode
		create directory with appropriate mode

    *	UIDs and GIDs are hardcoded in at MAKEDEV generation time.
	(Unfortunately there's not a simple way of determining a GID
	a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"
2003-12-21 17:37:26 +00:00
jdolecek 1b00681156 switch over to unified MAKEDEV 2003-10-24 20:12:04 +00:00
jdolecek 930959c6c0 fix floppy & ramdisk targets 2003-10-24 11:05:23 +00:00
jdolecek 1eeb241e42 sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV
2003-10-24 08:20:26 +00:00
jdolecek 520acde2ae com0/com1 is exactly tty00/tty01, so g/c them from the list 2003-10-20 16:41:39 +00:00
jdolecek 7a46124ea4 determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
2003-10-19 19:07:26 +00:00
jdolecek 7126da0813 MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
2003-10-15 19:13:32 +00:00
jdolecek 2d42eb283b reassing majors for crypto and pf to use the newly defined MI major range 2003-10-10 22:47:10 +00:00
dsl 5c2824bce4 Revert 'console' back to /dev/console (from /dev/constty) 2003-10-04 07:41:11 +00:00
dsl e5217087d8 Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.
2003-10-03 14:54:20 +00:00
dsl fca3294820 Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
2003-10-03 14:35:36 +00:00
pooka 12cd483962 add isdn telephony dialout devices 2003-09-19 11:11:37 +00:00
dsl 35bb292640 Put back port specific majors for ptys 2003-09-05 17:02:52 +00:00
lukem 1279eb3872 fix typo in previous, where "pty*" had been changed to "ty*". (hi dsl@ !) 2003-09-01 08:19:57 +00:00
dsl 818622e67a Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
2003-08-30 11:00:20 +00:00
itojun 4440262659 create /dev/crypto 2003-08-22 05:06:22 +00:00
itojun 3f14c71f75 reserve cdev major # for PF. ok'ed by technical-exec 2003-07-27 14:17:57 +00:00
christos e98429f32c fix ugen issue from latest shell changes that treat numeric constants
differently depending on their prefix.
2003-05-07 13:41:34 +00:00
ragge ce0bf5c28d Add ksyms to "std" devices. 2003-04-27 13:15:28 +00:00
fvdl 750b5b8327 Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
2003-04-17 18:03:10 +00:00
wiz a20ec90fe2 Uppercase ITE. Addresses PRs 21138 to 21141 by Igor Sobrado. 2003-04-14 05:45:40 +00:00
perry 2f1f870fa8 make ipl consistently "IP Filter" 2003-03-31 03:58:55 +00:00
perry 7109d49cfa builtin->built-in 2003-03-30 20:18:47 +00:00
lukem a250e57c96 Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.
2003-01-03 15:34:30 +00:00
jdolecek 67705b22ff use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
2002-12-19 20:03:46 +00:00
lukem fe5f6ce974 - add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate
2002-12-02 13:18:03 +00:00
isaki 0875e475a6 add bmd, memory disk driver for Nereid bank memory. 2002-12-01 09:01:07 +00:00
lukem bc22c3f4d9 whitespace consistency cleanup 2002-10-21 04:14:47 +00:00
elric f31269d0d9 Include cgd on the list of things to be mknod(8)ed on all arches. 2002-10-04 18:53:22 +00:00
isaki ea16a0bcb3 fix mode and group of /dev/reload 2002-08-17 05:28:54 +00:00
isaki 6746f40ce5 Add usb*, ugen* 2002-08-11 13:21:07 +00:00
lukem fa4442cae4 - in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all)  (for consistency)
2002-08-09 02:39:15 +00:00
wiz b097765198 Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.
2002-06-18 13:40:14 +00:00
christos 4bef4356c3 Add device creation support for systrace. 2002-06-17 16:21:03 +00:00