961880b501
ANSIfy, KNF.
2001-09-16 05:32:18 +00:00
64b6b76a21
You must set 'HPCFB_SWAP_*' if bytes are stored in reverse order, i.e.
...
little endian like order, however, usage of 'HPCFB_SWAP_*' was widely
misunderstood because it reminded you of 'RI_BSWAP' in raster operation.
Please note that 'RI_BSWAP' indicate that frame buffer byte order is different
from natural order of system while 'HPCFB_REVORDER_*' is independent of
system byte order.
2001-07-22 09:56:39 +00:00
e267c67b60
"infomation" -> "information"
2001-07-17 01:37:43 +00:00
a2c4938b03
not set HPCFB_SWAP_BYTE
2001-06-11 09:36:44 +00:00
6c5da9bd76
o Change initialization for config_hook() base lcd control.
...
o Fix backlight control in case that light is controlable but not be
able to get status.
o change some verbose prints.
2001-03-26 09:40:45 +00:00
ee1d25e7bd
* assume backlight is on if backlight value cannot get.
...
* move the lcd control codes used config_hook_call()
in *_hardpower() to *_power().
2001-03-12 08:54:25 +00:00
80214041c7
support WSDISPLAYIO_SVIDEO/WSDISPLAYIO_GVIDEO.
...
lcd on/off
2001-03-09 08:54:18 +00:00
b8e5bc569c
* add WSDISPLAYIO_PARAM_BACKLIGHT, WSDISPLAYIO_PARAM_CONTRAST,
...
WSDISPLAYIO_PARAM_BRIGHTNESS supports.
2001-02-27 08:54:17 +00:00
659f65e0ee
hpc common files are moved to dev/hpc.
2001-02-22 18:37:54 +00:00
6602ad15b5
* show framebuffer address in boot time.
2001-02-15 09:17:18 +00:00
0e59b8d2ec
add 4bpp support (sync with mq200 rev1.6 -> 1.7)
2001-01-23 08:51:48 +00:00
1021bf4bf1
Change hf_baseaddr usage. Now it potins frame buffer start address instead
...
of hf_baseadd + hf_offset. You should use hf_baseaddr only in kernel and
you should use hf_offset only with mmap system call from userland.
2000-12-03 13:43:40 +00:00
a15e59c0eb
enlarge ITE8181_LCD_ON_SELF_DELAY.
2000-10-27 08:09:15 +00:00
b394074d8c
- change constant to static variable for
...
ite8181 access delay parameter after lcd power on.
- ITE8181_WINCE_CMAP.
use presetting cmap by pbsdboot.exe(temporally)
2000-10-23 09:03:31 +00:00
938b01e688
experimental ite8181 video driver for hpcfb.
...
- just copy from bivideo.
- erase WindowsCE hardware cursor initialy.
- LCD power management codes exist, but currently disabled.
Because some devices(include ite8181) confuse after LCD power turn on.
WorkPad z50 power unit seem to be very weak,
2000-10-02 03:57:53 +00:00
uch