strictly-aligned versions of memcmp(3), bcopy(3), memcpy(3), and
memmove(3).
This is used for 403 by ld.so.conf with machdep.no_unaligned variable.
With this library, unaligned memory accesses are significantly reduced
for 403 (from several hundreds to few tens per sec under heavy load);
only ld.elf_so (typically few times per fork) and statically-linked
binaries do such access.
It works --- except for:
- mvsata(4) problems (already reported repeatedly)
- NFS root with mvgbe(4) is weird; the system eventually locks up
Yes, we need to fix them...
Now that we have WSDISPLAYIO_LISTFONTS we want users to be able to use it.
NB: older kernels didn't check that WSDISPLAYIO_LDFONT was performed
on wsfont(4) device opened for writing and relied on its restrictive
root-only permissions to restrict who can load fonts.
created if it actualy did create keys (one should thing that a
function called sshd_keygen() only is called to create keys, but
the "precmd" magic makes it run every time sshd is started or stopped).
Patch from Tom Lane, with modifications suggested by kre and a minor
additional cosemtic change.
radeon has different case but same name firmware files. the lower case
ones are already installed into /libdata/firmware, and to avoid having
to provide some special method to build on systems with case-preserving
file systems (such as macOS), we install the lower case ones in /usr.
this means that anyone that requires the lower case files must either
have /usr as part of the / file system, or manually keep them updated.
last part of PR#54976, though i doubt we'll try to pull up these.
this is enabled on i386, amd64 and arm64.
first character in /etc/gpio.conf and have the rest evaluated in a
shell. It is useful to be able to do actions after setting up gpio
pins or attaching gpioiic(4).
These tests run two threads for five seconds each to try to trigger
races in the event of broken memory barriers. They run only on
machines with at least two CPUs; on uniprocessor systems there's no
point -- the membars can correctly just be (instruction barrier)
no-ops.
that "continue" is a command as intended, and not an invalid last arg to
the '[' command (the last arg is required to be ']').
Sometime the proverbial someone should go through this and remove all the
obsolete test -o and -a operators, and probably do something with test's
usage of ! as well. Not today, or not by me anyway.
in the kernel sets. Having the .gdb kernels in the EXTRA_KERNELS does not
work, since we only walk through the standard kernels in the Makefile. Also
doing DEBUG=-g in config twice does not hurt.
as the name implies, includes a netbsd.gdb inside each kernel set:
$ tar -tzvf kern-GENERIC.tgz
-rwxr-xr-x 0 root wheel 29398264 Dec 19 12:50 ./netbsd
-rwxr-xr-x 0 root wheel 208125880 Dec 19 12:50 ./netbsd.gdb
Symlinks inferred from linux-firmware/WHENCE and compared to a linux distro's
firmware.
Note: said linux distro appears to have some mistakes compared to the
linux-firmware repo in linking ucode_unload.bin to unload_bl.bin and vice
versa in some places.
I didn't replicate this aspect, and lack the hardware to test it.
Driver module as illustrated here:
https://www.sparkfun.com/products/13911
A SCMD module is a ARM SOC simular to a Arduino in front of a motor
driver chip. The single SCMD module can control two motors and up to
16 additional modules can be chained together using an internal I2C
bus. One can interface with the SCMD using tty uart commands, SPI or
I2C. The driver in this commit adds a kernel driver for the I2C and
SPI interfaces. The command line utility provides a set of
convenience commands that support most of the functions of the SCMD
and is able to use the tty uart mode, SPI user land or the included
kernel driver in a uniform manor.
The use of the SCMD module is mostly for small robots and the like,
but it can control anything that is controllable by voltage.
in /etc/rc.conf.d are loaded.
Usually this does not matter as rcvar and name are set to the same value.
For pf_boot and npf_boot, rcvar is set to pf and npf respectively.
Prior to the change, if:
rc.conf contains nfp=YES
rc.conf.d/npf does not exist
Then:
/etc/rc.d/npf_boot rcvar
outputs:
# npf_boot
$npf=YES
If:
rc.conf contains npf=NO (or is not set)
rc.conf.d/npf contains npf=YES
Then:
/etc/rc.d/npf_boot rcvar
outputs:
# npf_boot
$npf=NO
This means that in the latter case, at boot time the npfctl start command
is never run and the firewall is not operational.
sensor such as:
https://www.adafruit.com/product/2857
This is a higher priced sensor with a lot of features, including the
ability to do sub-second periodic updates. The driver supports
everything about the sensor except for the alert pin.
As well as offering a dynamic amount of iterations and memory usage,
which fits well with NetBSD's goal of running on a diverse range of
hardware devices, Argon2id offers improved resistance to GPU-based
password cracking and side channel attacks.
rin