Also, remove a call to path_create() that causes the `prepend' path held by
pkg_perform() to be deleted, causing a core dump later when pkg_perform()
tries to remove it itself.
make sure that a failed installation of a rpe-requisite package kills
the attempt to add the package. This reverts pkg_add(1) to traditional
behaviour.
Bump version number accordingly.
to be added, first try to use the exact version of the pre-requisite
with which the base package was built (from the @blddep directive in
the +CONTENTS file), and then use the traditional dependency from the
@pkgdep directive.
Also rename a variable from "code" to "errc" to make it obvious what
the variable counts.
Bump version number to 20020306.
version of the pre-requisite package which was used to build the
package. This is derived automatically from the list of pre-requisite
packages which is provided to pkg_create(1) in the -P argument.
Bump the version number to 20020305.
Versions of the pkg_install tools prior to 20020305, when adding a
binary package with embedded @blddep directives, will warn that the
directive is not recognised, but will continue to add the binary
package.
> revision 1.22
> date: 2002/02/18 00:57:54; author: hubertf; state: Exp; lines: +10 -3
> make @cwd work a bit more reliable:
>
> When -L is used (as it is by pkgsrc), don't override the directory
> set by @cwd unconditionally with what was given to -L (srcdir).
> Instead, use the @cwd directory.
functionality adds recognition of '_' and "pl" as pseudonyms for '.',
so that 1.2p2 == 1.2.2, and adds recognition of "pl" and "rc" strings,
which stand for "patchlevel" and "release candidate" respectively.
In addition, this version should handle alphabetic characters properly
(so that 1.2e == 1.2.5)
Normal NetBSD revision number processing has been retained (and is always
compared after all other tests have been performed).
64-bit integers are used internally for each component of the version
number.
Make sure that each va_start has one and only one matching va_end,
especially in error cases.
If the va_list is used multiple times, do multiple va_starts/va_ends.
If a function gets va_list as argument, don't let it use va_end (since
it's the callers responsibility).
Improved by comments from enami and christos -- thanks!
Heimdal/krb4/KAME changes already fed back, rest to follow.
Inspired by, but not not based on, OpenBSD.
given filename.
* Use strip_txz() inside the FTP-wildcard-depends handling code to
prevent it handing a combination of glob and dewey pattern to pmatch(),
which our pattern matching code currently does not handle. Bugfix!
XXX The other places that could be changed to use strip_txz() are not
touched in this commit to keep the impact of this change small in the
light of the approaching 1.5.1 release. I'll revisit them.
When invoked with 'pkg_add -u ...', and the package to be installed is
found already being installed, the old (installed) package is removed
with pkg_delete, and the new one is installed.
A very crude handling of dependencies is done (by moving the +REQUIRED_BY
file aside before pkg_delete, and back into place after the new pkg is
installed).
This needs a lot more work to TRT, but it's a first start.
When the bzip-pkg handling was introduced, a dewey pattern (foo>1) may get
a character-class-pattern attached (.t[bg]z), and the code was not prepared
to match that. I've special-cased handling of character-class pkg suffixes
for ".t[bg]z", and when scanning a dir in findmatchingname() now both the
'first' part of the pattern (e.g. "foo>1") and the suffix (e.g. ".t[bg]z")
must match the file, hence the two pmatch() calls.
* findbestmatchingname_fn():
Caught a case where ".t[bg]z" was not properly handled. Must do the same
suffix-processing again here!
Fixes PR 11856 by Dan McMahill <mcmahill@mit.edu>
pkg_info
* In pkg_create, compress with bzip2 if a .tbz suffix is given
* Fix pkg_info to work via ftp, either via URL specified on command line
or via one made up from PKG_PATH (if set)
XXX ALWAYS tacks on ".t[bg]z", NOT ".t[gb]z" !!!
The FTP coprocess formerly wrote the output of the "get | tar vxf -" pipe
to stderr, which resulted in no output to the feedback pipe (stdout), and
thus the timeout was not updated for any line printed by the "tar" process.
This was now changed to also feed back the chars to the expect() routine,
updating the timeout handler. The "also" part is implemented by passing
the output through "tee /dev/stderr".
At least NetBSD and Solaris have this, so no problem there.
Thanks to Frank van der Linden for helping me to debug this.
Found during a post-install of a fresh machine:
1. setenv PKG_PATH ftp://smaug.fh-regensburg.de/pub/NetBSD/arch/i386ELF/All
2. pkg_add tcsh ssh XF86Config
3. Run XF86Config
4. pkg_add kde
5. Be done.
We should do this from /etc/rc.local on first boot... :-)
'get pkg.tgz "| cd /var/tmp/inst ; gunzip | tar -x -f -"'), handle
two cases better:
1. Timing out ftp connections: Make sure the hanging pipeline gets a ^C
(SIGINT), and wait until the ftp prompt is available again. Else we
may nuke away tar's working dir, and it may be displeased.
2. One of the commands from the pipeline exiting: caught via SIGCHLD;
for this signal to be delivered, a empty handler is needed)
Adresses PR 10925 by Greg A. Woods <woods@planix.com>
a bit, to make them more descriptive
* in findbestmatchingname_fn, fix a bug where a null pointer wasn't
caught (I wonder why we didn't actually hit that case...)
* Bugfix in findbestmatchingname_fn: when comparing, strip off any
trailing ".tgz", as this will give wrong results. "1.9.8.tgz" was
found to be greater than "1.9.8.1".
Modulo some code cleanup, this gives NetBSD full wildcard support not
only in pkgsrc, but esp. for binary packages installed from local disk
and via FTP. For more information, see:
http://www.feyrer.de/NetBSD/wildcards.html
- Minor re-indenting
- Fix printing of @ignore in pkg_info (did this ever work?)
- Fix installing of local wildcard dependencies (unused in main system)
- Fix deleting of packages that depend on wildcard dependencies
(fexist() is not enough there :-)
installed version and binary packages. The size can be queried then
via pkg_info:
xfeyrer @ noon% pkg_info -s xv
Information for xv-3.10apl1:
Size of this package in bytes: 4670692
xfeyrer @ noon% pkg_info -S xv
Information for xv-3.10apl1:
Size in bytes including required pkgs: 14610165
While doing work on the size code, support for the @src directive was
removed (formerly enabled with the pkg_create -s switch, but unused in
our pkg system). The new pkg_info -s and -S switches were tested on
installed, local (file) and remote (ftp) packages.
In bsd.pkg.mk, take special care for pkg_* versions that do not have
the pkg_create -s and -S switches and do not record size information
there.
URLs, and an access function (URLlength) - saves having various
hardcoded strings all over the place. Delete isURL, and use URLlength
in its place. Also use URLlength when parsing a filename for host
and filename part.
invoked for (FTP) URLs, this was just a matter of recognizing HTTP URLs
in the places where FTP URLs were recognized (and updating a comment and
the manual page).
list, using chopss' list functions (moved to lib/lpkg.c and
lib/lib.h).
Properly handle wildcards in arguments to "pkg_info", "pkg_delete" and
"pkg_admin check".
Some other minor cleanups.
hardcoded strings "tar" and "/usr/bin/tar". This allows the package
tools to use GNU tar with a different name (it's often installed as
gtar), and from a directory other than /usr/bin.
PR bin/6284, slightly munged about for platforms which aren't LP64.
Also, don't use hardcoded strings (or their lengths) when we've
already defined them in a common header file.
+ Fix a bug introduced when the package name comparison routines were moved -
alternate matching now completes and works properly.
+ Add -R argument to pkg_create, which re-orders any directories in the
generated PLIST into reverse alphabetic order.
+ Add -l argument to pkg_create, which checks that any symbolic links in
the package are relative-to-$PREFIX pathnames, rather than full pathnames.
+ General cleanup elsewhere.
a stack of directories, we'll do with a save/restore_dirs cludge for
now. => Fixes the bug I mentioned yesterday that shows when one pkg
installs another (depending) pkg via FTP.
Fixed another bug with extract-in-place when the destination dir is
already there.
will show error messages before aborting.
Patch supplied by Jim Bernard <jbernard@ox.mines.edu> in PR 6010, cleanup()
in delete/perform.c prepared to be used as signal handler by me.
- ensure hostname from gethostname() is nul-terminated in all cases
- minor KNF
- use MAXHOSTNAMELEN over various other values/defines
- be safe will buffers that hold hostnames
- use -v on pkg_add for dependent packages (forgot on last commit)
- most important: do string-magic on the right variable when trying
to find dependent packages on the local disk (i.e. package given as
filename, not URL)
Un-munge pkg_install/lib/Makefile which I'd overwritten on libftpio commit.
Make it compile on NetBSD.
Install pkg_* programs in /usr/sbin
XXX agc - Still to do XXX
Cleanup call to mktemp (for a tmp dir) in pkg_install/lib/pen.c
Create ftperr.c in the correct directory.
mycroft