89fc8be761
Change the default settings for sendmail.
...
(1) The stock sendmail.cf will only listen on the loopback interface.
(2) The stock submit.cf specifally connects to "localhost." which
should be less susceptible to being confused or looking confused.
(3) The smtp listener starts by default, if needed. The setting in
/etc/default/rc.conf is still "no", but rc.d/sendmail detects the
default setting and will change it to yes if need is determined.
Need is defined as "nothing else seems to have been changed about the
mail configuration but we'd like locally originated and locally
destined mail to be delivered". If you change, eg, mailer.conf to
point to postfix or some other MTA, sendmail will not start.
2004-07-15 03:47:18 +00:00
5f89bdd921
Make the directory into which crash dumps are saved into something
...
that can be controlled via rc.conf. The default is, of course,
/var/crash.
2004-07-15 03:29:55 +00:00
20fd132b8d
* Add BEFORE: SERVERS, so state is restored much earlier in the boot sequence.
...
* REQUIRE: isdnd, so this will be shutdown before that, to prevent
future problem if isdnd eve gets an explicit "shutdown" keyword.
Per discussion with Martin Husemann.
2004-07-05 08:21:15 +00:00
ebdc55a49e
Make sure "downinterfaces" comes first - this means on shutdown this
...
script will run before downinterfaces destroys all state we try to
save here.
2004-07-05 07:53:03 +00:00
313b9c84ab
Install "pf" and "pflogd".
2004-06-30 09:22:41 +00:00
de1993c88e
rc.d fragment for PF. Peter Postma
2004-06-29 04:48:28 +00:00
eb24f87047
add rcvar
2004-06-03 16:29:15 +00:00
d5fc55fa51
Add rcvar="quota"
2004-06-03 16:27:44 +00:00
367e1200da
create /dev/random when chrooted.
2004-05-21 15:40:22 +00:00
b997a4053a
Update the paths to the required_files configuration files for the
...
move from /usr/X11R6/lib/X11/<app> -> /etc/X11/<app>.
Resolves PR [misc/25613] from Jukka Salmi.
2004-05-17 23:41:27 +00:00
ee04d88971
Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
...
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.
XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.
2004-05-16 09:53:09 +00:00
c8dd377ead
Add RCS Id.
2004-04-25 16:52:19 +00:00
f672be074d
s/netbsd.org/NetBSD.org/
2004-04-23 10:59:47 +00:00
1d0fe2e424
Whitespace fixes, some code re-factoring, and a bit more verbose messages.
2004-04-21 19:35:13 +00:00
48019a3a47
simply logic and flow of check_part function
2004-04-21 18:27:26 +00:00
1b003e4b0c
abstract superblock field reading into shell function
2004-04-21 18:06:06 +00:00
115f147f20
add function for reporting verbose messages
2004-04-21 17:26:42 +00:00
496faa9025
tweak return value of check_part function
2004-04-21 17:07:47 +00:00
324ebbbef7
some minor shell programming tweaks recommended by christos
...
use [ -n ] instead of [ ! -z ]
use $() instead of ``
use just "$@" instead ${1+"$@"}
2004-04-21 17:02:41 +00:00
bbf17112c5
use shell constructs and cat instead of sed since
...
sed may not be available early in the rc.d sequence
2004-04-21 16:12:31 +00:00
4fe7bbb7da
enable rc.d fixsb script
...
initial testing suggests that it is working and I am confident it
will not cause irrevocable damage
2004-04-18 04:02:27 +00:00
1195d38f2f
add support for turning off fixsb in rc.conf
...
default is fixsb=YES
2004-04-18 03:49:43 +00:00
d328d71583
This rc.d script attempts to correct problems
...
which may have been introduced by booting a netbsd-current kernel
from between April of 2003 and January 2004. For more information
see <http://mail-index.NetBSD.org/current-users/2004/01/11/0022.html >
This script was developed as a response to NetBSD pr install/25138
This should not be added to the Makefile or the default install until
it has been further tested
2004-04-16 14:52:52 +00:00
68909c287b
Store the full path to the /usr/sbin/postfix in $postfix_command
...
and use the latter postfix_op() to implement start/stop/reload.
(We generally use full paths in rc.d scripts.) Problem noted by Bill Squier.
2004-04-08 06:15:27 +00:00
f79db8d04e
move ipmon's "-D" argument from "command_args" to "ipmon_flags" so that
...
passing an (optional) filename argument (that must come last) works fine
from $ipmon_flags. from PR#25006.
2004-04-04 13:59:36 +00:00
f6e9f3cb15
Backout last change. I failed to note that the problem described in
...
PR bin/24653 had already been fixed with revision 1.9 of this file.
2004-03-31 18:01:07 +00:00
ee6be08283
Take account of the fact that "ntpd" writes it's pidfile after chroot().
...
Closes PR bin/24653.
2004-03-31 17:52:06 +00:00
c384cda06a
Add ssh_keygen_flags variable to rc.conf to allow users to set the
...
size of auto-generated keys if desired.
2004-02-18 17:36:34 +00:00
0120b80220
add identd
2004-02-01 02:32:58 +00:00
1359f873c4
new identd script
2004-01-31 21:50:45 +00:00
0b297c927b
Missing rcvar. From Nicolas Joly in PR 24106.
2004-01-15 11:20:19 +00:00
ec3213dda0
Add the veriexec rc.d script.
2004-01-14 10:51:54 +00:00
67b5617823
Add startup script for verified exec.
2004-01-14 06:53:50 +00:00
79ca61d5d8
Define an rcvar "virecover" so that this can be configurable. The default
...
is YES.
2004-01-11 14:21:43 +00:00
6892f132b9
Set an rcvar so that this can really be configurable by the rcvar. (This
...
means that it has long been not be able to do so!)
2004-01-11 13:57:56 +00:00
91d3025816
Add rtclocaltime.
2003-12-27 00:29:21 +00:00
448491ee86
Add a new /etc/rc.conf option: rtclocaltime=YES adapts the RTC offset
...
at boot automatically, so a machine dual booting another OS that uses
the RTC at localtime and NetBSD agree on the current time even if daylight
saving started/ended (without recompiling a kernel twice per year).
Awk code by Matt Thomas.
2003-12-27 00:23:22 +00:00
1b373d7a5e
Revert part of previous; etc/rc.d/kdc must be installed even if Kerberos
...
isn't enabled.
This is how the rc.d system works in conjunction with our current build
and install system; all the rc.d scripts are installed even if the
subsystems they control are not.
2003-12-26 12:04:35 +00:00
501d4710c0
prepare for bind 9.
2003-12-18 18:30:18 +00:00
4758291178
Fix the checkflist for builds without Kerberos 4 (MKKERBEROS4=no)
...
and without Kerberos 4 & 5 (MKKERBEROS=no). Previously checkflist
complained of missing files.
* move kerberos- and kerberos 4-only files into new flists,
distrib/sets/lists/*/krb.*
* make the flist generators grok MKKERBEROS{,4} variables
* fix Makefiles which treat MKKERBEROS=no as MKKERBEROS5=no.
9 out of 10 experts agree that it is ludicrous to build w/
KERBEROS4 and w/o KERBEROS5.
* fix header files, also, which treat MKKERBEROS=no as MKKERBEROS5=no.
* omit some Kerberos-only subdirectories from the build as
MKKERBEROS{,4} indicate
(I acknowledge the sentiment that flists are the wrong way to go,
and that the makefiles should produce the metalog directly. That
sounds to me like the right way to go, but I am not prepared to do
revamp all the makefiles. While my approach is expedient, it fits
painlessly within the current build architecture until we are
delivered from flist purgatory, and it does not postpone our
delivery. Fair enough?)
2003-12-11 09:46:26 +00:00
505ed045c0
ntpdate to a multicastclient address doesn't work
2003-12-04 18:28:54 +00:00
8098923219
Make the ntp.conf parsing more specific, and therefore more robust. Closes
...
PR bin/23305.
2003-10-29 19:00:14 +00:00
836389dfbc
Supply the usual default setting of $commmand. Omission pointed out by
...
Launey Thomas in private mail.
2003-10-20 16:09:15 +00:00
b5aee30a01
set fsck_flags=-p in /etc/defaults/rc.conf instead of checking if it is
...
empty in /etc/rc.d/fsck. From Bernd Ernesti.
2003-10-20 15:02:15 +00:00
663be81e89
Allow for a syntax extension for "ntp.conf" with ntp 4.2.0.
2003-10-19 13:31:28 +00:00
b703c0fa68
Use "$command", instead of hard-coded "ntpdate", so that the user can
...
override the path using the usual mechanisms.
2003-10-19 13:23:57 +00:00
e2ba1d7082
Allow overrides via fsck_flags
2003-10-15 17:38:04 +00:00
d8eef4e074
Allow an IPv6 default route to be set from /etc/mygate6 or $defaultroute6.
...
Approved by itojun@.
2003-10-12 09:50:05 +00:00
ea949da1c7
Add a knob to turn off automatic configuration (via rc.d) of
...
non-auto-configured (via kernel) raid devices. oster says ok.
2003-09-10 14:50:19 +00:00
777a312e0f
ipnat needs to be before SERVERS - one may need NAT for servers to work
...
(eg, ntpdate).
2003-08-22 08:43:26 +00:00
f48b602669
Don't use depricated "-f" option to mixerctl(1). Patch supplied by
...
Bruce J.A. Nourish in PR misc/22524.
2003-08-18 13:04:10 +00:00
b0f080676b
Support "multicastclient" directives in ntp.conf.
...
Based on [bin/17930] from Stoned Elipot.
2003-06-27 07:22:36 +00:00
78e800a41c
Ifwatchd now uses syslog, so require syslogd.
2003-06-24 09:32:46 +00:00
91b1808f8e
Remove kvm_mkdb, it's not used anymore.
2003-05-11 18:17:30 +00:00
f0150db8f2
Add an rc script for powerd(8).
2003-04-18 05:19:35 +00:00
f334171ccc
Variable substitution happens at trap installation time, not at trap
...
execution time - so it used to print "Using default configuration of
/etc/passwd".
2003-04-03 11:25:10 +00:00
a7627e5f06
Reorganize/clarify the configuration checks (and subsequent messages)
...
that might block startup, and be more permissive in general about
allowing the daemons to start.
Add some descriptive comments to the top of the smmsp script that
describe the purpose of the process.
2003-04-02 18:00:13 +00:00
9dc7b7c964
Tweak postinstall to check for (and help out on) the upgrade to
...
sendmail 8.12.8. Some of the same machinery (in shorter form) is in
the additions to rc.d/sendmail. Also, add a smmsp startup script for
the sendmail client queue runner.
2003-03-24 15:19:27 +00:00
4f30393de2
Allow ccd autoconfiguration to be turned off (by setting ccd=NO in
...
/etc/rc.conf; default is YES.)
Suggested by elric, ok'ed by lukem.
2003-03-19 08:54:00 +00:00
4c74ff3fdd
Allow cgd configuration to be skipped (by setting cgd=NO, defaults to YES).
...
Closes my PR/20766. Based on a suggestion by lukem.
2003-03-19 06:06:47 +00:00
047a69a2e5
Make it start before "SERVERS" and remove redundant dependency on
...
"network". This brings it in line with the altqd script, which has
very similar requirements.
2003-03-14 09:18:50 +00:00
f70738da04
move altqd slightly later in the boot sequence; as it's in /usr/sbin,
...
it needs to depend upon mountcritremote, not run before NETWORKING ...
2003-03-10 18:17:06 +00:00
db97c4116c
Use the pidfile created by wsmoused.
2003-03-04 22:32:11 +00:00
3065ba7178
Execute the actual command as it's set instead of calling the sh
...
routine directly. This allows one to to override a specific command
via the use of /etc/rc.conf.d/sysdb.
2003-02-24 01:04:45 +00:00
117844eb75
change behaviour of 'reload' to only reload the NAT rules and NOT flush
...
the state table, making it much more useful.
The behaviour of 'restart' is unchanged (flush state table and reload
rules), but is now done slightly more elegantly.
ok'd by lukem.
2003-02-16 22:18:46 +00:00
2c589141ff
Implement start_cmd as:
...
start_cmd="${name} "'${rc_arg}'
and stop_cmd & reload_cmd as:
stop_cmd=$start_cmd
reload_cmd=$start_cmd
(Just to be tricky)
2003-01-31 06:47:16 +00:00
405c73366e
Back out previous (as discussed with releng). The correct way to set this is:
...
# echo "myserver" > /var/yp/binding/`domainname`.ypservers
2003-01-16 11:55:28 +00:00
1e0411d0d5
Script to bind a NIS client to a known server.
...
$ grep yp /etc/rc.conf
ypbind=YES
ypbind_flags="-ypset"
ypset=YES
ypset_flags="myserver"
2003-01-16 07:37:33 +00:00
567c0a7e50
in comment, metion about src/distrib/sets/lists/etc/mi as well.
2003-01-10 05:07:45 +00:00
99f6c8054f
add staticroute
2003-01-09 15:58:23 +00:00
e4cf375b81
Script to add and remove static routes:
...
eg:
$ cat /etc/route.conf
# Turn on/off IP forwarding.
+sysctl -w net.inet.ip.forwarding=1
-sysctl -w net.inet.ip.forwarding=0
net 192.168.2.0 -netmask 255.255.255.0 192.168.150.2
2003-01-09 15:57:02 +00:00
8d1054dc70
revert previous; luke and matt want this as a separate script.
2003-01-09 15:52:58 +00:00
22aa10c0a0
Add /etc/route.conf processing to add static routes. Removes one more
...
reason for netstart.local.
2003-01-09 15:12:47 +00:00
2c3ae584e1
Run ldconfig with ${rc_flags} so you can set ldconfig_flags in rc.conf
...
to specify additional a.out directories to merge into the runtime link
cache.
2003-01-08 04:17:19 +00:00
2005231632
Revert last change for now. It causes hangs during system shutdown when
...
NFS filesystems are mounted.
2003-01-07 08:41:55 +00:00
74efbb051c
Add keyword "shutdown" so that this script is really executed on system
...
shutdown to delete clone interfaces.
2003-01-06 10:11:14 +00:00
247d6694f7
Handle links to absolute paths too. Closes my PR 19125.
2002-12-05 16:52:58 +00:00
2cc646d2d1
ipmon -D writes a pidfile; use it
2002-10-21 05:20:00 +00:00
ba5fd9b3f8
/etc/rc.d/mixerctl: Add capability to save and restore mixer settings.
...
Thanks to Julio Merino.
2002-10-12 11:29:28 +00:00
98839fb386
Added cgd rc.d script and put it in the appropriate postinstall and
...
mtree files.
2002-10-09 14:55:53 +00:00
a67080c774
Reorganize the sysdb script so that lkm{1,2,3} can request that the
...
dev database be rebuilt after loading modules. Loading modules might
create new nodes in /dev, but the dev database is being initialized
too soon for lkm2 and lkm3. This means that, eg, /dev/xf86 (typically
marked AFTERMOUNT and loaded by lkm2) will show up properly. Reviewed
by lukem.
2002-10-08 16:21:52 +00:00
6e40068171
Automatically create and destroy cloning interfaces and sync IP Filter
...
immediately afterwards before bringing the interface up. This avoids
a small security gap existing in the previous scheme where IP Filter
was synced after all cloning interfaces were created and brought up.
2002-10-05 05:24:40 +00:00
3e11ad9d79
Print a warning message if IP forwarding is not activated (PR#10295).
2002-09-24 11:03:53 +00:00
8a20c1019d
create a utmpx with the same permissions as utmp
...
Solves pr 18282, although very differently.
2002-09-16 02:23:31 +00:00
df86ef5a9f
Split raidframe parity checking/rebuild out into raidframeparity, which is
...
called after quota so we don't end up with fsck and raidframe parity rebuild
taking forever after a crash/reboot.
While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not
raid[0-9].conf & raid[0-9][0-9].conf
2002-09-03 15:35:51 +00:00
b8ce6e8201
Added touch panel calibration utility.
2002-08-27 14:12:09 +00:00
39acbf03ed
Avoid exit(0) to play more nicely with rc_fast_and_loose.
...
Noted by Greywolf on tech-userlevel.
2002-08-16 18:05:19 +00:00
afbf483286
Add a wdogctl startup/shutdown script.
2002-07-30 05:58:42 +00:00
e9a1e24f95
Ignore "peer" statements for local clocks too when selecting hosts from
...
ntp.conf.
2002-07-19 03:22:09 +00:00
4b77d56d71
Skip blank lines in the input file (mixerctl.conf).
2002-07-16 03:24:24 +00:00
4b45ab0ce1
add comment:
...
"if you're adding new scripts, don't forget to update
src/etc/postinstall and src/etc/mtree/special."
2002-07-03 23:31:25 +00:00
908bf86adc
Check for /dev/clockctl availability and print appropriate diagnosis if not.
2002-07-02 14:47:22 +00:00
490569127e
add wsmoused.
2002-06-29 04:07:08 +00:00
7f89b13752
Add wsmoused
2002-06-27 15:08:55 +00:00
da820a3387
Build the list of names to check for $XXX_chrootdir support from
...
`rcorder -k chrootdir` rather than hardcoding "named ntpd".
Based on [misc/16884] from Jarle Greipsland <jarle@uninett.no>
2002-06-18 14:35:38 +00:00
56dc20a9f6
ntpd_chrootdir needs /dev/clockctl as well
2002-06-17 06:47:58 +00:00
3da8227a70
$ntpd_chroot requires "pseudo-device clockctl" in the kernel
2002-06-15 01:55:44 +00:00
4f32d6fce8
- at least require mountcritremote (mixerctl is in /usr)
...
- read from < mixerctl.conf instead of piping output of cat...
2002-06-11 16:31:41 +00:00
8ebbe63269
Fix typo.
2002-06-02 19:04:10 +00:00
56d95e6efe
Add mixerctl script.
2002-06-02 18:37:45 +00:00
atatat