83953e5d92
Pull up following revision(s) (requested by tsutsui in ticket #1514 ):
...
distrib/atari/floppies/common/dot.profile: revision 1.9
distrib/vax/inst-common/dot.commonutils: revision 1.6
distrib/amiga/miniroot/dot.profile: revision 1.11
distrib/utils/script-installer/dot.commonutils: revision 1.8
distrib/amiga/floppies/inst-common/dot.commonutils: revision 1.9
Fix yet another "[: SMALL test, no fallback usage" error on installation.
The same problem as PR/54835 of the miniroot scripts, i.e.
avoid and replace use of -o binary primary marked obsolescent
by POSIX.1-2017:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html#tag_20_12
8_16
Noticed on installation of NetBSD 9.3 on TT030, and
maybe should be pulled up to netbsd-9.
Avoid more obsolescent binary primaries not supported by crunched test(1).
See PR/54835 and PR/56983 for details.
2022-08-30 18:35:18 +00:00
c22cc5acdc
Pull up following revision(s) (requested by jmcneill in ticket #511 ):
...
distrib/utils/embedded/conf/evbarm.conf: revision 1.34
Remove the pretty much useless 128MB swap partition from the arm images.
2019-12-08 14:35:10 +00:00
51b681bfe9
Pull up following revision(s) (requested by jmcneill in ticket #491 ):
...
sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
sys/arch/arm/ti/ti_sysc.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.2
sys/dev/i2c/tps65950.c: file removal
sys/arch/evbarm/conf/std.ti: file removal
sys/dev/i2c/files.i2c: revision 1.101
sys/dev/i2c/files.i2c: revision 1.102
sys/dev/i2c/at24cxx.c: revision 1.32
sys/dev/i2c/files.i2c: revision 1.103
sys/dev/i2c/twl4030.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.104
sys/dev/i2c/twl4030.c: revision 1.2
sys/dev/i2c/twl4030.c: revision 1.3
sys/arch/arm/ti/ti_com.c: revision 1.6
sys/arch/arm/ti/ti_com.c: revision 1.7
sys/arch/arm/ti/ti_com.c: revision 1.8
sys/dev/fdt/cpufreq_dt.c: revision 1.11
sys/arch/arm/ti/ti_iic.c: revision 1.1
sys/dev/fdt/cpufreq_dt.c: revision 1.12
sys/arch/arm/ti/ti_usb.c: revision 1.1
sys/arch/arm/ti/ti_iic.c: revision 1.2
sys/dev/fdt/cpufreq_dt.c: revision 1.13
sys/arch/arm/ti/ti_iic.c: revision 1.3
sys/arch/arm/ti/ti_iic.c: revision 1.4
sys/arch/evbarm/conf/files.ti: file removal
sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
sys/arch/arm/dts/omap3-n900.dts: revision 1.1
sys/arch/arm/ti/ti_edma.h: revision 1.1
sys/arch/evbarm/conf/OVERO_INSTALL: file removal
sys/arch/arm/ti/ti_usbtll.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.5
etc/etc.evbarm/Makefile.inc: revision 1.108
sys/arch/arm/ti/files.ti: revision 1.6
sys/dev/i2c/tps65217pmic.c: revision 1.13
etc/etc.evbarm/Makefile.inc: revision 1.109
sys/arch/arm/ti/files.ti: revision 1.7
sys/dev/i2c/tps65217pmic.c: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.8
sys/arch/arm/ti/files.ti: revision 1.9
sys/dev/fdt/usbnopphy.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.55
sys/arch/evbarm/conf/GENERIC: revision 1.56
sys/arch/evbarm/conf/GENERIC: revision 1.57
sys/arch/evbarm/conf/GENERIC: revision 1.58
sys/arch/evbarm/conf/GENERIC: revision 1.59
sys/arch/evbarm/conf/BEAGLEBONE: file removal
sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
sys/arch/arm/ti/ti_otgreg.h: revision 1.1
sys/arch/arm/ti/ti_tptc.c: revision 1.1
sys/arch/evbarm/conf/IGEPV2: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.10
sys/dev/i2c/tda19988.c: revision 1.1
sys/arch/evbarm/conf/OVERO: file removal
sys/dev/i2c/tda19988.c: revision 1.2
sys/dev/i2c/tda19988.c: revision 1.3
sys/arch/arm/ti/omap3_dss.c: revision 1.1
sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
sys/arch/arm/ti/ti_omapintc.c: revision 1.2
etc/etc.evbarm/Makefile.inc: revision 1.112
etc/etc.evbarm/Makefile.inc: revision 1.113
sys/arch/arm/ti/ti_div_clock.c: revision 1.1
etc/etc.evbarm/Makefile.inc: revision 1.114
sys/arch/evbarm/conf/N900: revision 1.32
sys/arch/evbarm/conf/N900: revision 1.33
distrib/utils/embedded/conf/armv7.conf: revision 1.36
sys/arch/evbarm/conf/GENERIC: revision 1.60
distrib/utils/embedded/conf/armv7.conf: revision 1.37
sys/arch/arm/ti/omap2_nand.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.61
sys/arch/arm/ti/omap2_nand.c: revision 1.2
sys/arch/evbarm/conf/GENERIC: revision 1.62
distrib/utils/embedded/conf/armv7.conf: revision 1.39
sys/arch/evbarm/conf/GENERIC: revision 1.63
sys/arch/arm/ti/ti_fb.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.64
sys/arch/evbarm/conf/GENERIC: revision 1.65
sys/arch/evbarm/conf/GENERIC: revision 1.66
sys/arch/evbarm/conf/GENERIC: revision 1.67
sys/arch/arm/ti/ti_platform.c: revision 1.7
sys/arch/arm/ti/ti_platform.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.2
sys/arch/arm/ti/ti_platform.c: revision 1.9
sys/arch/arm/ti/am3_prcm.c: revision 1.3
sys/arch/arm/ti/am3_prcm.c: revision 1.4
sys/arch/arm/ti/am3_prcm.c: revision 1.5
sys/arch/arm/ti/am3_prcm.c: revision 1.6
sys/arch/arm/ti/am3_prcm.c: revision 1.7
sys/arch/evbarm/conf/DEVKIT8000: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.9
sys/dev/fdt/syscon.c: revision 1.4
sys/arch/arm/ti/files.ti: revision 1.10
sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.11
sys/arch/arm/ti/if_cpswreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.12
sys/arch/arm/ti/ti_sdhc.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.13
sys/arch/arm/ti/files.ti: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.15
sys/arch/arm/ti/files.ti: revision 1.16
sys/arch/arm/ti/omap3_cm.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.17
sys/arch/arm/ti/omap3_cm.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.18
sys/arch/arm/ti/omap3_cm.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.19
sys/arch/arm/ti/omap3_cm.c: revision 1.4
sys/arch/arm/ti/ti_motg.c: revision 1.1
sys/arch/arm/ti/ti_rngreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
sys/arch/arm/ti/am3_platform.c: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.22
sys/arch/evbarm/conf/README.evbarm: revision 1.23
sys/arch/arm/ti/ti_platform.c: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.24
sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
sys/arch/arm/ti/ti_prcm.c: revision 1.2
sys/arch/evbarm/conf/README.evbarm: revision 1.25
sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
sys/arch/arm/ti/ti_prcm.c: revision 1.3
sys/arch/evbarm/conf/README.evbarm: revision 1.26
sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
sys/arch/evbarm/conf/README.evbarm: revision 1.27
sys/arch/arm/ti/ti_ehci.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.20
sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
sys/arch/evbarm/conf/OVERO: revision 1.56
sys/arch/evbarm/conf/TI: file removal
sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.55
sys/dev/fdt/fdtvar.h: revision 1.56
distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
sys/dev/fdt/fdt_phy.c: revision 1.6
sys/arch/arm/ti/ti_iicreg.h: revision 1.1
sys/arch/arm/ti/ti_lcdc.c: revision 1.1
sys/arch/arm/ti/ti_gpio.c: revision 1.1
sys/arch/arm/ti/ti_iicreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.c: revision 1.2
sys/dev/fdt/files.fdt: revision 1.46
sys/arch/arm/ti/ti_gpio.c: revision 1.2
sys/arch/arm/ti/ti_iicreg.h: revision 1.3
sys/arch/arm/ti/ti_lcdc.c: revision 1.3
sys/dev/fdt/files.fdt: revision 1.47
sys/arch/arm/ti/ti_gpio.c: revision 1.3
sys/dev/fdt/pinctrl_single.c: revision 1.1
sys/arch/evbarm/conf/files.generic: revision 1.9
sys/arch/arm/ti/ti_gpmc.c: revision 1.1
sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARD: file removal
sys/arch/arm/ti/omap3_prm.c: revision 1.1
sys/arch/arm/ti/ti_platform.h: file removal
sys/arch/arm/ti/omap3_platform.c: revision 1.1
sys/arch/arm/ti/ti_prcm.h: revision 1.2
sys/arch/arm/ti/omap3_platform.c: revision 1.2
sys/arch/arm/ti/ti_prcm.h: revision 1.3
sys/arch/arm/ti/ti_prcm.h: revision 1.4
sys/dev/fdt/fdt_clock.c: revision 1.9
sys/arch/arm/ti/ti_edma.c: revision 1.1
sys/arch/arm/ti/ti_otg.c: revision 1.1
distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
sys/arch/arm/ti/if_cpsw.c: revision 1.7
sys/arch/evbarm/conf/std.igepv2: file removal
sys/arch/arm/ti/if_cpsw.c: revision 1.8
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1
Adapt ti fdt glue to support GENERIC kernel.
Do not search 64-bit directories for dts files
Fix am33xx_platform_early_putchar for pre-MMU output
Add bus driver for TI sysc interconncet.
Make com work again
Add EDMA TPCC and TPTC drivers.
Add driver for one-register-per-pin type pinctrl devices.
Add MMCHS support.
Add USB support.
Disable autoidle
Place devmap above KERNEL_IO_VBASE
Use Timer2 for timecounter, and enable hw module.
Add support for TI AM335x
Add atmel,24c256 compat data
Add I2C support.
Add tiiic, tps65217pmic
Add FDT support
Fix early putchar, add reset func
No support for tegra210 in armv7 kernel
Switch to GENERIC kernels only.
Get mac address from DT
Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.
enumerate devices under child "clocks" node
Add support for platform specific opp table filters.
Add fdtbus_clock_count to count the number of clock references on a given node
enumerate devices under child "clocks" node
Add AM335x DVFS support.
Enable TI AM335x DVFS support
Add support for GPIO controller.
Add tigpio
Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).
Add support for hardware RNG.
Add tirng
Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty
Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c
Set stdout-path on TI OMAP3 BeagleBoard
Add support for TI OMAP3.
Add OMAP3 support.
Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.
Skip xref if it is 0
Add generic USB PHY driver
Add driver for TI TWL4030 Power Management IC
Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.
Add OMAP3 USB support.
Add twl, usbnopphy, tiusb, tiusbtll
Move omap3 dtb files to /boot/dtb
Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)
Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.
Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required
Set the stdout-path on xM like Ti OMAP3 BeagleBoard
Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)
Handle different register layout on OMAP3
Add omapfb to FDT-ized TI port.
Use dss as console on Nokia N900.
Enable IRQ status bits for omap3 type and set speed properly
Add RTC support
Remove tps65950pm (hardware now supported by twl4030.c)
Add NAND flash support.
Add tigpmc, omapnand
Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)
Fix non-FDT build
Cleanup and remove dependency on arch/arm/omap
Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties
Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.
Remove commented out IGEPV2 entry
OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.
No longer used.
Also match ti,omap2-onenand
Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context
Add driver for NXP TDA19988 HDMI encoder
Add support for AM335x display controller (LCDC).
Add tdahdmi, tilcdc, tifb
Test DRM_MODE_* flags, not VID_*
Comment out mode fixup (not needed it seems)
Use 297MHz for display clock
Select closest rate to desired pixel clock
Speed up mode setting a bit and turn off the display while changing modes
2019-11-27 13:46:44 +00:00
dbd0f90d78
Pull up following revision(s) (requested by maya in ticket #435 ):
...
distrib/sets/maketars: revision 1.90
usr.sbin/sysinst/arch/playstation2/md.h: revision 1.2
usr.sbin/sysinst/arch/sandpoint/md.h: revision 1.3
usr.sbin/sysinst/arch/evbppc/md.h: revision 1.3
usr.sbin/sysinst/arch/hpcarm/md.h: revision 1.3
usr.sbin/sysinst/arch/mvme68k/md.h: revision 1.3
distrib/sun3/MakeInstTape: revision 1.3
usr.sbin/sysinst/util.c: revision 1.33
distrib/sets/lists/rescue/mi: revision 1.1
distrib/sets/lists/base/rescue.sun2: file removal
usr.sbin/sysinst/arch/zaurus/md.h: revision 1.3
distrib/sets/lists/base/rescue.ad.m68k.shl: file removal
distrib/sets/regpkgset: revision 1.13
usr.sbin/sysinst/arch/i386/md.h: revision 1.7
distrib/sets/lists/base/rescue.sparc: file removal
distrib/notes/mvme68k/xfer: revision 1.19
distrib/sets/sets.subr: revision 1.187
distrib/common/bootimage/Makefile.bootimage: revision 1.22
usr.sbin/sysinst/msg.mi.de: revision 1.16
usr.sbin/sysinst/arch/atari/md.h: revision 1.3
rescue/Makefile: revision 1.38
distrib/sets/lists/base/rescue.macppc: file removal
usr.sbin/sysinst/arch/arc/md.h: revision 1.4
distrib/miniroot/install.sub: revision 1.49
usr.sbin/sysinst/arch/acorn32/md.h: revision 1.3
usr.sbin/sysinst/arch/x68k/md.h: revision 1.3
usr.sbin/sysinst/arch/hpcmips/md.h: revision 1.3
usr.sbin/sysinst/arch/bebox/md.h: revision 1.3
usr.sbin/sysinst/arch/hpcsh/md.h: revision 1.2
distrib/sets/lists/base/rescue.shark: file removal
usr.sbin/sysinst/arch/emips/md.h: revision 1.5
distrib/utils/embedded/mkimage: revision 1.70
usr.sbin/sysinst/arch/shark/md.h: revision 1.3
usr.sbin/sysinst/arch/pmax/md.h: revision 1.4
usr.sbin/sysinst/arch/amiga/md.h: revision 1.4
usr.sbin/sysinst/arch/hp300/md.h: revision 1.5
rescue/list.ldconfig: file removal
distrib/sets/lists/base/rescue.ad.m68k: file removal
usr.sbin/sysinst/arch/prep/md.h: revision 1.4
usr.sbin/sysinst/arch/cats/md.h: revision 1.4
usr.sbin/sysinst/arch/amd64/md.h: revision 1.7
usr.sbin/sysinst/msg.mi.es: revision 1.17
usr.sbin/sysinst/msg.mi.fr: revision 1.20
usr.sbin/sysinst/msg.mi.pl: revision 1.23
distrib/sets/lists/base/rescue.i386: file removal
usr.sbin/sysinst/arch/evbarm/md.h: revision 1.3
distrib/sets/lists/base/rescue.vax: file removal
distrib/amd64/uefi-installimage/Makefile.bootimage: revision 1.12
usr.sbin/sysinst/arch/evbmips/md.h: revision 1.3
distrib/sets/lists/base/rescue.mi: file removal
distrib/sets/README: revision 1.14
usr.sbin/sysinst/arch/sgimips/md.h: revision 1.4
distrib/sets/lists/base/rescue.sparc64: file removal
distrib/sets/lists/base/rescue.mi: revision 1.45
distrib/sets/lists/base/rescue.mi: revision 1.46
usr.sbin/sysinst/arch/ofppc/md.h: revision 1.4
usr.sbin/sysinst/arch/cobalt/md.h: revision 1.4
distrib/sets/lists/base/rescue.ad.arm: file removal
distrib/sets/lists/base/rescue.mac68k: file removal
usr.sbin/sysinst/defs.h: revision 1.45
usr.sbin/sysinst/arch/landisk/md.h: revision 1.2
distrib/notes/atari/xfer: revision 1.17
etc/Makefile: revision 1.441
usr.sbin/sysinst/msg.mi.en: revision 1.22
distrib/sun2/MakeInstTape: revision 1.2
Remove ldconfig from /rescue, and mark it MI obsolete.
- ldconfig in netbsd refers to a.out binaries only. We've been ELF-only
since NetBSD 2.0 or so, and having it in /rescue served little purpose
even before that, as /rescue is standalone.
- Using MI obsolete to avoid the need for MD set lists where ldconfig
is the sole entry
Mark /rescue/edlabel as MI-obsolete, so we can remove all remaining MD
rescue set list files.
Split out /rescue to its own set and adapt installers/images to add it.
This is meant to make updates safer: if something goes wrong with updating
base, we still have the old, standalone /rescue to recover from.
2019-11-17 07:04:33 +00:00
b51ae09720
Pull up following revision(s) (requested by martin in ticket #74 ):
...
distrib/utils/libhack/strcasecmp.c: revision 1.2
distrib/utils/libhack/strcasecmp.c: revision 1.3
Make this at least work for ASCII strings (there are way more users
than libcurses in various crunched environments, so the original assumption
of a very limited set of inputs was wrong).
use unsigned char to prevent sign extension.
2019-08-18 13:12:27 +00:00
d13e2430b4
Pull up following revision(s) (requested by martin in ticket #2 ):
...
distrib/utils/libhack/multibyte.c: revision 1.9
Avoid using an unitialized variable
2019-08-02 05:39:28 +00:00
5c19a89c12
Provide a way for crunched programs to use a non-WIDE_CHAR version of
...
libcurses by setting HACK_CURSES=yes before including this makefile.
2019-07-28 10:27:57 +00:00
f3b7b31ee0
We (especially libcurses and nvi) use more multibyte character locale
...
related symbols nowadays. Update libhack to avoid pulling in full grown
multibyte locale support on small install media.
2019-07-28 10:21:18 +00:00
272639de87
Fallback to non-EFI boot script if EFI bootloader is absent.
...
Note that we do not currently build EFI bootloader for earmv7hf-eb,
as it requires little-endian version of toolchain.
2019-07-21 16:05:24 +00:00
d33bb7af26
Add an empty fmtcheck
2019-06-22 22:50:39 +00:00
1e5b60d053
move creds_msdos.8 into the normal place and install it.
2019-06-12 09:03:31 +00:00
f409dc043f
various cleanups inspired by reviews:
...
- clean up variable usage
- be explicit that $ssh_userkeys is global
- don't assig id output to a variable not used
2019-06-12 03:06:48 +00:00
9cc213eff5
explicitly strip carriage return so that non-unix text files work.
2019-06-12 00:28:56 +00:00
8a8727e49a
Use more markup, fix some typos.
2019-06-11 11:57:14 +00:00
3e5e960fa5
add a method to add user accounts or ssh keys to the embedded
...
(installable) images which may be run entirely headless and
have no current method to edit the installation without another
netbsd host to modify the root (FFS) partition.
creds_msdos reads the creds.txt file from the msdos boot
partition and provides 4 basic methods:
sshkeyfile <user> <path on msdos>
sshkey <user> <entry>
useraddhash <user> <passwd hash>
useradd <user> <passwd>
the first two create a user with ssh key(s), and the second
two create a user with a password. if the last method is used
and raw passwords are given, the creds.txt file will be
shredded and deleted by rm -P.
inspired by a request from a pine64 user. ok jmcneill@.
2019-06-11 10:50:57 +00:00
2c9023a65e
Switch the kernel7.img RaspberryPi kernel in the armv7 image to GENERIC
...
and thus reducing the number of kernels built in an evbarmv7 release.
2019-05-18 07:33:10 +00:00
a876fb76fb
Fix build with MKYP=no
2019-05-09 08:20:35 +00:00
337dcfaf52
Remove sun50i support from 32-bit GENERIC.
2019-04-13 10:58:11 +00:00
edce60238f
Re-enable efiboot for armv7 (thanks skrll@)
2019-04-04 14:26:39 +00:00
d7a2d29c18
Turn off efiboot until we figure out why it fails on some boards.
2019-04-02 10:00:32 +00:00
ba4377082a
Install GENERIC ELF kernel as /netbsd for EFI booting
2019-03-30 13:43:52 +00:00
753fbe4bcd
Switch to efiboot
2019-03-30 13:37:45 +00:00
7bee52e9e0
Install bootarm.efi to boot partition
2019-03-30 13:07:57 +00:00
67177861a2
Dedup and add the small jemalloc implementation so our install media has
...
a chance to fit again.
2019-03-28 15:04:41 +00:00
64fbb2204e
Add Amlogic dtb files to arm64.img
2019-03-03 11:44:18 +00:00
07c9782f50
pply zlib hack for gcc 7 here too (4th occurance!)
2019-02-06 09:17:18 +00:00
918e5fb8e9
No need to specify root and console bootargs on amlogic
2019-01-21 16:28:39 +00:00
1521ad8a22
Another kernel bites te dust.
...
Remove ODROID-C1 as it is now replaced by GENERIC. Thanks jmcneill.
2019-01-20 10:18:03 +00:00
a3ff5f3bc4
Rename the DE0 Nano SoC dts file to its new linux/uboot name
2019-01-05 13:55:46 +00:00
08587e7728
Fix mmcpart for exynos SD card
2019-01-03 18:21:55 +00:00
23aab5ad96
Fix variable escaping in dev_exists()
2018-12-02 15:43:04 +00:00
af8f486465
Add support for configuring Amazon.com EC2 SSH keys and hostnames. While
...
here, only set wscons=YES if a wsdisplay0 device is present.
2018-11-30 20:53:02 +00:00
19a287f3ad
Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.
2018-11-22 21:11:37 +00:00
76478902d7
Use the GENERIC kernel where possible in armv7.img and remove the old
...
kernels from the bulid for SUNXI and TEGRA.
While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img
2018-11-01 11:05:24 +00:00
05a9a2fa5c
fixed.
2018-10-26 22:28:59 +00:00
af02aed8ed
Sort
2018-10-20 08:29:11 +00:00
72e140f563
Whitespace
2018-10-20 08:26:10 +00:00
105b90ee57
a bit of sorting
2018-10-20 08:24:11 +00:00
781429f55f
Use special ROOT. prefix in fstab entries instead of assuming ld0
2018-10-06 13:11:22 +00:00
dde6e2aeab
resize_disklabel: if disk and partition is not specified, use kern.root_device/kern.root_partition sysctls
2018-10-06 09:58:55 +00:00
8311c2da83
Make gzip on some crunched install media support xz decompression
...
(just like our base version does).
2018-10-01 17:50:08 +00:00
e965811037
Install ELF kernel to the FFS partition and boot it with bootaa64.efi
...
instead of loading kernel.img from the MSDOS partition with extlinux.conf
2018-08-27 22:36:49 +00:00
f00446168a
Move rk3399 dtb files to the correct location
2018-08-12 17:15:56 +00:00
fb1b6b4d24
Enable booting of netbsd-EXYNOS kernel
2018-07-04 23:10:06 +00:00
7a2303fd1d
Install RK3328 .dtb files to the correct location
2018-06-19 15:13:51 +00:00
81171f787d
Increase reserved space at start of image from 4MB to 16MB to make room
...
for Rockchip bootloaders.
2018-06-19 15:12:05 +00:00
fe33aa2786
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
...
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
2018-04-01 04:35:01 +00:00
ac34435581
Remove port-acorn26
...
OK core@
2018-01-24 09:04:40 +00:00
d5f1b2266e
Enable automatic booting on tegra210
2018-01-06 20:27:31 +00:00
fc29671b41
No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console
2017-12-18 19:08:16 +00:00
martin