07c30f824f
Use device_private().
2006-03-30 16:09:28 +00:00
a6d74476ad
Added evbmips instkernel and sysinst.
2006-03-30 15:45:42 +00:00
f9aeb216b8
Added INSTALL_OMSAL400: Install kernel for OMS-AL400.
2006-03-30 15:30:59 +00:00
59e53df5fa
Silence device creation and destruction. That means there won't be
...
spurious messages when doing "vnconfig -l", but it also means there won't
be a message when an actual device is created. Oh, well.
PR#33116 by Izumi Tsutsui.
2006-03-30 15:19:45 +00:00
b3e724899c
Remove unused file. Pointed out by uwe.
2006-03-30 13:44:51 +00:00
ea7fb95927
We have both kinds of music here - bump /usr/lib/libc.so.12.* too.
2006-03-30 12:53:20 +00:00
c5fcdd1719
some cleanups after the introduction of GOP_SIZE_MEM flag.
...
- remove GOP_SIZE_READ/GOP_SIZE_WRITE flags.
they have not been used since the change.
- ufs_balloc_range: remove code which has been no-op since the change.
thanks Konrad Schroder for explaining the original intention of the code.
- ffs_gop_size: don't extend past eof, in the case of GOP_SIZE_MEM.
otherwise genfs_getpages end up to allocate pages past eof unnecessarily.
2006-03-30 12:40:06 +00:00
dbf1ff6457
Fix more proc/lwp conversions. From Gregory McGarry in private email.
2006-03-30 11:16:00 +00:00
972ca1ead8
Remove an unused, obsolete copy (pointed out by Valeriy E. Ushakov).
2006-03-30 08:07:47 +00:00
7b95c00460
Coverity CID 2784: Add more checks for value==NULL.
2006-03-30 08:02:40 +00:00
705abf8c8b
Following the example of sys/sys/proc.h rev. 1.164, pad the LWP flags to 8
...
chars. It is nicer and makes the comparison of proc and lwp flags much
easier.
2006-03-30 07:08:40 +00:00
689f73d8a7
Don't pmap_remove_pv mappings for unmanaged pages.
...
Closes PR mips/33166. Reviewed by chuq@
2006-03-30 05:57:01 +00:00
e61c7de467
Coverity CID 2452: possible negative array index; CID 1518 and CID 1517: possible overrun of static array
2006-03-30 05:04:22 +00:00
1c3223f073
Coverity CID 1288: possible negative array index
2006-03-30 04:41:15 +00:00
67f465476e
Coverity CID 993: dereference of NULL pointer
2006-03-30 04:27:24 +00:00
cc2349eefc
Coverity CID 1293: not checking for an error return
2006-03-30 04:19:38 +00:00
fa4599a211
Coverity CID 1287: not checking for error return
2006-03-30 04:10:04 +00:00
788c9819d4
vmapbuf() does not tolerate failure to get virtual space, use UVM_KMF_WAITVA.
2006-03-30 04:07:13 +00:00
60b21d1590
use uvm_km_alloc() instead of uvm_map().
2006-03-30 04:05:05 +00:00
4dff387338
G/c this stale copy of SYS.h. It has not been updated since 1999. It
...
has not been used since an unused copy of setjmp.S has been removed
from here in 2002 (i386 removed its own in 1999).
2006-03-30 02:13:10 +00:00
995d4b331f
Coverity CID 1327: check for error return
2006-03-30 01:32:27 +00:00
a3fb5aa745
Bah! Compare, don't assign!
2006-03-30 01:31:13 +00:00
dce307414d
Coverity CID 1328: check for error return
2006-03-30 01:28:46 +00:00
500bc95c18
bump libc
2006-03-30 01:25:56 +00:00
f413c2ba58
Coverity CID 1326: check for error return
2006-03-30 01:25:52 +00:00
8d5214b18a
PR/33163: Auster Vl.: fts: cant allocate memory | filename too long
...
Change the ftp_pathlen and fts_namelen to u_int from u_short so that
pathnames > 32K work.
2006-03-30 01:23:50 +00:00
a559f08510
do not build or install libcdk as a part of base anymore
...
cdk source still lives in dist however
approved by core@
2006-03-30 00:00:23 +00:00
473e9e89bf
Add the netbsd32 MD bits for sparc64 and amd64 to support SA.
...
Many thanks to all who helped for that little project, notably Martin
Husemann for teaching me a bit about the very special sparc64 world.
2006-03-29 23:07:49 +00:00
69a77971a8
Regen (_lwp*, sa_*).
2006-03-29 23:04:48 +00:00
99a30ba980
Implement the _lwp* and sa_* families of syscalls, using the newly
...
introduced hooks in the native code.
2006-03-29 23:04:12 +00:00
699fe710fb
Rework the _lwp* and sa_* families of syscalls so some details can be
...
handled differently depending on the emulation. This paves the way for
COMPAT_NETBSD32 support of our pthread system.
2006-03-29 23:02:31 +00:00
562d0d89a2
Instead of using hard-coded values for various registers, get them from the
...
current context. Valid values can change depending on how the kernel is
setup. i386 and amd64 happen to be setup differently.
2006-03-29 22:55:15 +00:00
b02d297c2d
Make more (and better) use of feature test macros; suggested by Matthias
...
Drochner.
2006-03-29 21:57:07 +00:00
3f6e548563
Don't add CPUFLAGS to CFLAGS twice.
2006-03-29 21:35:32 +00:00
505b26e976
Add predicate IN6_IS_SCOPE_EMBEDDABLE(__a), which is true if and
...
only if the address __a is the type in which the IPv6 stack embeds
scope information.
2006-03-29 21:29:59 +00:00
4db39a7dbf
When reflecting an ICMP Echo, do not scribble over read-only/shared
...
mbuf storage.
2006-03-29 21:13:55 +00:00
603c15a57f
Provide TOOL_GMAKE defintiion
2006-03-29 21:12:20 +00:00
67840cd950
Turn on gmake builds if GCC4 is enabled (and force it's install before continuing
2006-03-29 21:10:52 +00:00
c9e6fd9591
Add support for installing gmake as tools/bin/nbgmake
2006-03-29 21:10:26 +00:00
36787e1273
Import of gnu make 3.80 for use with gcc4 cross builds.
...
Downloaded from ftp://ftp.gnu.org/pub/gnu/make/make-3.80.tar.gz
2006-03-29 21:09:18 +00:00
ba3b1be79f
Provide a default for USE_GCC4 (no currently) so it can be tested against
2006-03-29 21:03:39 +00:00
aac6b8bd1f
Mention IPv6 support in tun(4).
2006-03-29 19:40:53 +00:00
4353e6ba07
* We no support IPv6, so remove BUGS section.
...
* Add HISTORY section and blame me for adding IPv6 support.
2006-03-29 19:39:51 +00:00
9cb092c876
Fix up the description of m_copyback_cow(), which was at best
...
ambiguous, and at worst, wrong.
2006-03-29 19:36:55 +00:00
782e550804
Add missing break tunwrite() which was causing EAFNOSUPPORT to be
...
returned, thus making IPv6 support broken.
!@#$%^...
2006-03-29 19:29:00 +00:00
ceb94256d6
Use device_private().
2006-03-29 18:17:36 +00:00
2f48a02e05
Do not disable access to tseng private registers
2006-03-29 18:05:57 +00:00
f9232cd159
Move pci_intr_map and pci_conf_interrupt functions to MD codes.
...
Change Max PCI devices from 5 to 31.
2006-03-29 17:50:33 +00:00
8c2612383a
Added CardBus, USB, and IEEE1394 devices.
2006-03-29 17:46:42 +00:00
ec03de0c39
Use device_pprivate().
2006-03-29 17:23:56 +00:00
thorpej