Commit Graph

42 Commits

Author SHA1 Message Date
itojun f8346292af move ipsec sysctl index to IPPROTO_AH (instead of IPPROTO_ESP),
so that you can perform sysctl operation when ESP is not compiled in.
1999-07-02 08:46:47 +00:00
itojun 118d2b1d4f IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.

- sys/kern: do not assume single mbuf, accept chained mbuf on passing
  data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
  package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
  file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen

In my understanding no code here is subject to export control so it
should be safe.
1999-07-01 08:12:45 +00:00
sommerfeld b7c70d2b2f If the new global variable hostzerobroadcast is zero, no longer assume
address zero of each net/subnet is a broadcast address.
(The default value is nonzero, which preserves the current behavior).

This can be set using sysctl; the boot-time default can also be
configured using the HOSTZEROBROADCAST kernel config option.

While we're here, defopt HOSTZEROBROADCAST and SUBNETSARELOCAL
1999-06-26 06:16:47 +00:00
hwr cf70cc28c7 Typo. :( 1998-09-14 21:15:56 +00:00
hwr 517139017e Some additions.
And IDPR-CMTP is 38 not 39 according to IANA.
1998-09-14 21:09:51 +00:00
hwr 366b9c4515 Add a gre tunnel pseudo network device. Gre = generic route encapsulation.
This device shows up like any other network interface and can be used to
tunnel L3 protocols as e.g. IP over IP.
1998-09-13 20:27:47 +00:00
kleink bb4f7768e4 Protect _XOPEN_SOURCE against sysctl MIB identifiers. 1998-09-05 19:03:25 +00:00
matt 36eac04cc0 Default IP flow to being enabled. Add a sysctl to control the maximum
number of flows (net.inet.ip.maxflows).  If set to 0, will disable fast
path forwarding.
1998-05-04 19:24:53 +00:00
kml 1579dcec47 Add support for deletion of routes added by path MTU discovery;
uses new generic route timeout code.  Add sysctl for timeout period.
1998-04-29 03:44:11 +00:00
perry f73530ba55 add/cleanup multiple inclusion protection. 1998-02-10 01:26:19 +00:00
lukem c80b4400e5 add the following, derived from FreeBSD:
* IP_PORTRANGE socket option, which controls how the ephemeral ports
  are allocated. it takes the following settings:
	IP_PORTRANGE_DEFAULT	use anonportmin (49152) -> anonportmax (65535)
	IP_PORTRANGE_HIGH	as IP_PORTRANGE_DEFAULT (retained for FreeBSD
				compat reasons, where these are separate)
	IP_PORTRANGE_LOW	use 600 -> 1023. only works if uid==0.
* in_pcb flag INP_ANONPORT. set if port was allocated ephmerally
1998-01-07 22:51:22 +00:00
lukem 1f8f74b669 enhance ephemeral port allocation code:
* support sysctl net.inet.ip.anonportmin (lowest ephemeral port)
  and net.inet.ip.anonportmax (highest ephemeral port).
  these can't be set to >65535, < IPPORT_RESERVED (unless IPNOPRIVPORTS
  is defined), and anonportmin has to be < anonportmax.
* use a cleaner way of only cycling through the available set once;
  this will be useful for when a random allocation scheme is used
* define IPPORT_ANON{MIN,MAX} instead of IPPORT_USER{LOW,HIGH}
1998-01-05 09:52:02 +00:00
lukem 0b57ba7265 as per the IANA assigned ports numbers document, use ports
49152..65535 for ephemeral ports (instead of 1024..5000).
closes my [kern/4440], but with correct code :)
1997-12-30 02:54:08 +00:00
thorpej 154fe5a522 Add INADDR_ALLRTRS_GROUP and INADDR_MAX_LOCAL_GROUP. 1997-12-16 00:02:05 +00:00
kml 6b86b260cb change sysctl net.inet.icmp.mtudisc to net.inet.ip.mtudisc 1997-10-18 21:18:28 +00:00
thorpej 10f29f9bcb Allow `subnetsarelocal' to be changed via sysctl. 1997-10-17 21:20:49 +00:00
matt 8c42ff649b Add support for returning maximum supported MTU when ip_output fails with
EMSGSIZE.
1997-10-14 00:52:39 +00:00
matt b2b8155618 Add IPPROTO_ESP and IPPROTO_AH defines. 1997-08-27 17:05:34 +00:00
cjs 8a449a258b Add net.inet.ip.allowsrcrt option which allows/drops all source
routed packets. This currently defaults to `drop,' but once we
verify  that all applications that rely on determining remote IP
addresses for authentication are dropping the connection when they
see a source route option (not just disabling the source route
option), we can turn this back on and conform with the host
requirements.
1997-02-25 08:35:41 +00:00
thorpej 9df1988ac8 Implement the IP_RECVIF socket option: supply a datagram packet's incoming
interface using a sockaddr_dl in a control mbuf.

Implement SO_TIMESTAMP for IP datagrams.

Move packet information option processing into a generic function
so that they work with multicast UDP and raw IP as well as unicast UDP.

Contributed by Bill Fenner <fenner@parc.xerox.com>.
1997-01-11 05:21:07 +00:00
mycroft 62a6cce9ca Add in_nullhost() and in_hosteq() macros, to hide some protocol
details.  Also, fix a bug in TCP wrt SYN+URG packets.
1996-09-09 14:51:07 +00:00
mycroft a8ba1d063c A few style changes to match netiso and netns. 1996-05-22 14:42:27 +00:00
christos 14d9cd33af netinet prototypes 1996-02-13 23:40:59 +00:00
thorpej 535abd80a2 Add a net.inet.ip.directed-broadcast sysctl as suggested by
Darren Reed <darrenr@vitruvius.arbld.unimelb.edu.au> in PR #1227.
This change is slightly different than the one submitted by Darren in
that the DIRECTED_BROADCAST compile-time option will behave like it used
to so that existing configurations utilizing it won't have to change.
1996-01-16 04:17:30 +00:00
thorpej 4b359df8c4 Add net.inet.ip.forwsrcrt: if zero, the system will not forward
source-routed packets.  Note this value is protected by kernel security
level; it can only be changed if securelevel < 1.
1996-01-15 21:11:46 +00:00
mycroft 0a99592372 Clean up many more casts. 1995-06-04 05:06:49 +00:00
mycroft eb216fd6c2 Avoid byte-swapping IP addresses at run time. 1995-06-01 21:35:34 +00:00
mycroft a54e2ffa20 Add IPPROTO_IP. Fix comment for IP_MULTICAST_IF. 1995-05-31 07:39:33 +00:00
cgd b5b72d26ea be a bit more careful and explicit with types. (basically a large no-op.) 1995-04-13 06:25:36 +00:00
jtc 7c04233887 KERNEL -> _KERNEL 1995-03-26 20:23:52 +00:00
cgd cf92afd66e New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD' 1994-06-29 06:29:24 +00:00
cgd 21c67feb12 i forgot a four letter word... 1994-05-14 06:25:32 +00:00
cgd fa080c8fad multiple inclusion protection, for the rpc headers 1994-05-14 05:46:35 +00:00
mycroft 07b4f2ab54 Update to 4.4-Lite networking code, with a few local changes. 1994-05-13 06:02:48 +00:00
deraadt ad4dc0ab15 need a stub 'struct socket;' for a prototype 1994-01-28 13:46:02 +00:00
cgd 78e6a7e18d renumber the IP setsockopt options back to the Reno/Net2 versions,
moving the multicast options after them
From: Mike Karels <karels@BSDI.COM>
(grr.)
1994-01-26 01:26:37 +00:00
mycroft 222ebaf50e Prototype the rest. 1994-01-09 01:06:02 +00:00
mycroft 4fe12e6e88 Fix some inconsistent spacing; spaces at the end of lines, etc. 1994-01-08 21:21:28 +00:00
hpeyerl 4bfc470a3c multicast patches
>From Chris Maeda, cmaeda@cs.washington.edu
These patches are derived from the IP Multicast patches for BSDI.
1993-12-06 05:46:37 +00:00
cgd 45a57e79ea more rcsid additions and file header cleanups 1993-05-20 03:49:51 +00:00
mycroft 235bd1db44 Add consistent multiple-inclusion protection. 1993-04-19 03:45:34 +00:00
cgd 61f282557f initial import of 386bsd-0.1 sources 1993-03-21 09:45:37 +00:00