fc374b9d4f
add Boca Research 4- and 8-port cards. from openbsd.
2002-10-29 08:59:36 +00:00
d9c216c219
Add Siig 20x 8 ports and and Oxford x952 cards. From Paul Shupak in kern/17790.
2002-08-02 10:40:30 +00:00
c7d782764a
Add an entry for Avlab Technology, Inc. Low Profile PCI 4 Serial (in Japan,
...
sold by Kuroutoshikou as SERIAL4P-LPPCI.)
2002-07-05 14:10:32 +00:00
2c69553625
Support Titan PCI-800L, a 8 serial puc card, from PR 17140.
...
Reviewed/approved by veego@ and martin@.
2002-06-02 18:43:27 +00:00
36bbd51aa2
Support NetMos NM9845 Quad UART and 1284 Printer port.
...
All 4 serial ports and parallel port seem to work.
2002-05-24 12:07:46 +00:00
616dac6232
Add support for NetMos NM9805 1284 Printer port.
...
Tested by David Kwok <dkwok@iware.com.au>.
2002-05-13 09:19:57 +00:00
6991df9968
Add config for the SUNIX line of pci serial/parallel cards.
...
Approved by: Jason R. Thorpe <thorpej@wasabisystems.com>
2002-04-11 13:53:56 +00:00
cb2d65aaf9
Fix a minor typo.
2001-12-16 22:23:01 +00:00
23dfa29697
Add the serial port on the Middle Digital, Inc. PCI Weasel.
2001-12-16 22:22:04 +00:00
879d358535
* Add entry for Dolphin Peripherals 4036 dual-serial card.
...
(Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may
attach two serial units, but I cannot find one to test).
2001-11-26 00:41:24 +00:00
56cffa29dc
Add Titan 200H (from Wojciech Puchar)
2001-11-18 20:20:25 +00:00
9048aaae21
add RCSID
2001-11-13 07:48:40 +00:00
3c508a8790
Add support for the PCI-400 card and correct the clock rate for all the
...
VScom/Titan cards.
2001-08-06 22:25:36 +00:00
d79f9adc90
Add another Lava serial board.
2001-07-04 22:39:11 +00:00
c7871f80bf
Looks like "VSCom PCI-800H" should be in fact "Titan PCI-800H".
2001-03-13 17:23:52 +00:00
749e1bccc9
add support for NetMos NM9835 Dual UART and 1284 Printer port.
2001-03-04 21:30:24 +00:00
6e65af2882
make this compile again.
2001-02-14 21:10:20 +00:00
e0ddf88b0a
PR/12204: Andreas Wrede: Add support for Lava 8-port serial card.
2001-02-14 15:07:28 +00:00
4dc117d433
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed.
...
Thanks to Bernd Ernesti for pointing this out.
2001-01-04 11:34:27 +00:00
3e63d458f0
Use COM_FREQ for COM part of the last commited entry.
...
Why are there other drivers here which have PUC_PORT_TYPE_COM but don't
use COM_FREQ or even don't have the extra field?
2001-01-04 08:49:31 +00:00
17718db1b9
Add support for boards with an Oxford Semiconductor chip.
...
This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and
1 parallel ports.
XXX We need to move the PCI IDs to pcidevs.
2001-01-04 08:43:21 +00:00
286f4f934f
Add a 'flag' member to struct puc_attach_args and struct port. For
...
PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits
to 0, used for real flags if needed).
Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM.
Add support for the VScom PCI-800H 8 port serial adapter (which uses
a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :)
XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800
entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 15:13:15 +00:00
2a11ec9347
Add definition for "Actiontec 56K PCI Master", from Bill Hudspeth.
2000-09-06 15:27:37 +00:00
f522d6f1ee
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 16:26:23 +00:00
b8a6774e36
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 05:43:44 +00:00
a525b9a12a
Commit patch kern/8778
...
Subject: NEC PCI modem support
1999-11-16 03:15:17 +00:00
636e8f4688
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 05:55:23 +00:00
111e8a47c4
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
...
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
6b77f11d67
put in better name/description for Simon G's board
1999-02-06 06:55:15 +00:00
04046c6dd7
add code to cope with multiple ports per BAR, as are found, for instance,
...
on the 8 port card Simon Gerraty has. In general, cards which have
this lots of ports also have a separate interrupt status register, but
this change is just to talk to the various ports independently. It works,
but it's not optimal. (XXX still need a good name for the card in the
comments, and to update the manual page.)
1999-02-06 06:29:54 +00:00
8f94f1a709
I went to Fry's and noticed a few more cards that probably will be
...
supportable with this driver, but currently aren't supported. Add them.
1998-07-12 02:21:56 +00:00
d77d6869b1
add a driver for "PCI 'universal' communications" cards, that is, PCI cards
...
which contain 'standard' com- and lpt-type ports. Some of these present
as PCI simple-communications/serial or simple-communications/parallel
devices, but many do not. (Additionally, there is no document that I can
find that describes the "specific well-konwn register-level" description
of how the 'standard' devices' config space headers shold work.) Eventually,
some of the devices driven by this code should become simple pci attachments
for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 18:52:41 +00:00
chs