by the isa.c bus driver and the "address/whatever not specified"
argument passed to leaf device drivers.
The former is "ISACF_XXX_DEFAULT" as generaterd by config(8), the latter
"ISA_UNKNOWN_XXX", defined in isavar.h.
This way we save a dependency of every ISA device driver on "locators.h".
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
instead have a call down from the PCMCIA mid-layer to set it. Use this from
pcmcia_function_enable(). (Currently the policy is the same, but this would
allow for more flexibility in deciding which mode to use.)
Now it is safe to hold the socket enabled during attach, so do that. Only
one enable/disable cycle to attach a card now!
Allow to enable the game port on an ES1888, in case the firmware didn't
this. (Otherwise we still rely on the firmware having mapped the sound
related registers.)
Limit this to the "isa" attachment for now because this is the only
one I'm able to test.
Attach the "joy" device directly at "ess" to make sure the port is
enabled before the "joy" probe/attach.
This makes the joystick port usable on a "PWS" alpha (Miata).
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
drivers that attach to it. This allows for other host interface chips
that use the same keyboards and mice, such as the ones in the ARM
IOMD20, ARM7500, and SA-1111. The PC-compatible driver is still
called pckbc(4), and the new abstraction layer is "pckbport", so the
child devices have moved from sys/dev/pckbc to sys/dev/pckbport, which
also contains some code shared between all host controllers. To avoid
incompatibility, pckbdreg.h is still installed in
/usr/include/dev/pckbc.
In theory, this shouldn't cause any behavioural changes in the drivers
concerned. Thy just use rather more function pointers than before. Tested
on i386 and (with a new host driver) acorn32. Compiled on several other
affected architectures.
with ACPI and PNPBIOS attachments; move it to new atppc_isadma.[ch]
and g/c previous atppc_isa_subr.[ch]
move attppc_isa_softc struct definition to atppc_isa.c, and reorganize
the attachment somewhat for better readability; also g/c detach support code
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
in a different fashion. Individually, they have the same functionality,
but their layout is different. An example of such a chipset is
the Promise 203xx.
To be able to deal with this, transform the cmd and dma bus_space handles
into an array of handles, each seperately created with bus_space_subregion.
The code generated by using the extra indirection shouldn't change much,
since the extra indirection is negated by having the offset calculation
already done in bus_space_subregion. E.g.
bus_space_write_4(tag, handle, offset, value)
becomes
bus_space_write_4(tag, handles[offset], 0, value)
Reviewed by Manuel Bouyer. Tested on wdc_isa, wdc_pcmcia, viaide, piixide (i386)
and on cmdide (sparc64).
