parentheses in return statements.
Cosmetic: don't open-code TAILQ_FOREACH().
Cosmetic: change types of variables to avoid oodles of casts: in
in6_src.c, avoid casts by changing several route_in6 pointers
to struct route pointers. Remove unnecessary casts to caddr_t
elsewhere.
Pave the way for eliminating address family-specific route caches:
soon, struct route will not embed a sockaddr, but it will hold
a reference to an external sockaddr, instead. We will set the
destination sockaddr using rtcache_setdst(). (I created a stub
for it, but it isn't used anywhere, yet.) rtcache_free() will
free the sockaddr. I have extracted from rtcache_free() a helper
subroutine, rtcache_clear(). rtcache_clear() will "forget" a
cached route, but it will not forget the destination by releasing
the sockaddr. I use rtcache_clear() instead of rtcache_free()
in rtcache_update(), because rtcache_update() is not supposed
to forget the destination.
Constify:
1 Introduce const accessor for route->ro_dst, rtcache_getdst().
2 Constify the 'dst' argument to ifnet->if_output(). This
led me to constify a lot of code called by output routines.
3 Constify the sockaddr argument to protosw->pr_ctlinput. This
led me to constify a lot of code called by ctlinput routines.
4 Introduce const macros for converting from a generic sockaddr
to family-specific sockaddrs, e.g., sockaddr_in: satocsin6,
satocsin, et cetera.
allowed. It takes three int * arguments indicating domain, type, and
protocol. Replace previous KAUTH_REQ_NETWORK_SOCKET_RAWSOCK with it (but
keep it still).
Places that used to explicitly check for privileged context now don't
need it anymore, so I replaced these with XXX comment indiacting it for
future reference.
Documented and updated examples as well.
with spl used to protect other allocations and frees, or datastructure
element insertion and removal, in adjacent code.
It is almost unquestionably the case that some of the spl()/splx() calls
added here are superfluous, but it really seems wrong to see:
s=splfoo();
/* frob data structure */
splx(s);
pool_put(x);
and if we think we need to protect the first operation, then it is hard
to see why we should not think we need to protect the next. "Better
safe than sorry".
It is also almost unquestionably the case that I missed some pool
gets/puts from interrupt context with my strategy for finding these
calls; use of PR_NOWAIT is a strong hint that a pool may be used from
interrupt context but many callers in the kernel pass a "can wait/can't
wait" flag down such that my searches might not have found them. One
notable area that needs to be looked at is pf.
See also:
http://mail-index.netbsd.org/tech-kern/2006/07/19/0003.htmlhttp://mail-index.netbsd.org/tech-kern/2006/07/19/0009.html
- Add a few scopes to the kernel: system, network, and machdep.
- Add a few more actions/sub-actions (requests), and start using them as
opposed to the KAUTH_GENERIC_ISSUSER place-holders.
- Introduce a basic set of listeners that implement our "traditional"
security model, called "bsd44". This is the default (and only) model we
have at the moment.
- Update all relevant documentation.
- Add some code and docs to help folks who want to actually use this stuff:
* There's a sample overlay model, sitting on-top of "bsd44", for
fast experimenting with tweaking just a subset of an existing model.
This is pretty cool because it's *really* straightforward to do stuff
you had to use ugly hacks for until now...
* And of course, documentation describing how to do the above for quick
reference, including code samples.
All of these changes were tested for regressions using a Python-based
testsuite that will be (I hope) available soon via pkgsrc. Information
about the tests, and how to write new ones, can be found on:
http://kauth.linbsd.org/kauthwiki
NOTE FOR DEVELOPERS: *PLEASE* don't add any code that does any of the
following:
- Uses a KAUTH_GENERIC_ISSUSER kauth(9) request,
- Checks 'securelevel' directly,
- Checks a uid/gid directly.
(or if you feel you have to, contact me first)
This is still work in progress; It's far from being done, but now it'll
be a lot easier.
Relevant mailing list threads:
http://mail-index.netbsd.org/tech-security/2006/01/25/0011.htmlhttp://mail-index.netbsd.org/tech-security/2006/03/24/0001.htmlhttp://mail-index.netbsd.org/tech-security/2006/04/18/0000.htmlhttp://mail-index.netbsd.org/tech-security/2006/05/15/0000.htmlhttp://mail-index.netbsd.org/tech-security/2006/08/01/0000.htmlhttp://mail-index.netbsd.org/tech-security/2006/08/25/0000.html
Many thanks to YAMAMOTO Takashi, Matt Thomas, and Christos Zoulas for help
stablizing kauth(9).
Full credit for the regression tests, making sure these changes didn't break
anything, goes to Matt Fleming and Jaime Fournier.
Happy birthday Randi! :)
net.local.stream.pcblist
net.local.dgram.pcblist
net.inet.tcp.pcblist
net.inet.udp.pcblist
net.inet.raw.pcblist
net.inet6.tcp6.pcblist
net.inet6.udp6.pcblist
net.inet6.raw6.pcblist
which allow retrieval of the pcbs in use for those protocols. The
struct involved is 32/64 bit clean and incorporates parts of struct
inpcb, struct unpcb, a bit of struct tcpcb, and two socket addresses.
* Include "opt_inet.h" everywhere IP-ids are generated with ip_newid(),
so the RANDOM_IP_ID option is visible. Also in ip_id(), to ensure
the prototype for ip_randomid() is made visible.
* Add new sysctl to enable randomized IP-ids, provided the kernel was
configured with RANDOM_IP_ID. (The sysctl defaults to zero, and is
a read-only zero if RANDOM_IP_ID is not configured).
Note that the implementation of randomized IP ids is still defective,
and should not be enabled at all (even if configured) without
very careful deliberation. Caveat emptor.
due to demonstrated low-period repeated IDs from the randomized IP_id
code. Consensus is that the low-period repetition (much less than
2^15) is not suitable for general-purpose use.
Allocators of new IPv4 IDs should now call the function ip_newid().
Randomized IP_ids is now a config-time option, "options RANDOM_IP_ID".
ip_newid() can use ip_random-id()_IP_ID if and only if configured
with RANDOM_IP_ID. A sysctl knob should be provided.
This API may be reworked in the near future to support linear ip_id
counters per (src,dst) IP-address pair.
configured with ``options FAST_IPSEC''. Kernels with KAME IPsec or
with no IPsec should work as before.
All calls to ip_output() now always pass an additional compulsory
argument: the inpcb associated with the packet being sent,
or 0 if no inpcb is available.
Fast-ipsec tested with ICMP or UDP over ESP. TCP doesn't work, yet.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
Do a little mbuf rework while here. Change all uses of MGET*(*, M_WAIT, *)
to m_get*(M_WAIT, *). These are not performance critical and making them
call m_get saves considerable space. Add m_clget analogue of MCLGET and
make corresponding change for M_WAIT uses.
Modify netinet, gem, fxp, tulip, nfs to support MBUFTRACE.
Begin to change netstat to use sysctl.
optimization made last year. should solve PR 17867 and 10195.
IP_HDRINCL behavior of raw ip socket is kept unchanged. we may want to
provide IP_HDRINCL variant that does not swap endian.
- let ipfilter look at wire-format packet only (not the decapsulated ones),
so that VPN setting can work with NAT/ipfilter settings.
sync with kame.
TODO: use header history for stricter inbound validation
between protocol handlers.
ipsec socket pointers, ipsec decryption/auth information, tunnel
decapsulation information are in my mind - there can be several other usage.
at this moment, we use this for ipsec socket pointer passing. this will
avoid reuse of m->m_pkthdr.rcvif in ipsec code.
due to the change, MHLEN will be decreased by sizeof(void *) - for example,
for i386, MHLEN was 100 bytes, but is now 96 bytes.
we may want to increase MSIZE from 128 to 256 for some of our architectures.
take caution if you use it for keeping some data item for long period
of time - use extra caution on M_PREPEND() or m_adj(), as they may result
in loss of m->m_pkthdr.aux pointer (and mbuf leak).
this will bump kernel version.
(as discussed in tech-net, tested in kame tree)
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc. The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list. This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also. The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
although this version has been changed somewhat:
- reference counting on ifaddrs isn't as complete as Bill's original
work was. This is hard to get right, and we should attack one
protocol at a time.
- This doesn't do reference counting or dynamic allocation of ifnets yet.
- This version introduces a new PRU -- PRU_PURGEADDR, which is used to
purge an ifaddr from a protocol. The old method Bill used didn't work
on all protocols, and it only worked on some because it was Very Lucky.
This mostly works ... i.e. works for my USB Ethernet, except for a dangling
ifaddr reference left by the IPv6 code; have not yet tracked this down.
- interop issues in ipcomp is fixed
- padding type (after ESP) is configurable
- key database memory management (need more fixes)
- policy specification is revisited
XXX m->m_pkthdr.rcvif is still overloaded - hope to fix it soon
dyoung