* Include "opt_inet.h" everywhere IP-ids are generated with ip_newid(),
so the RANDOM_IP_ID option is visible. Also in ip_id(), to ensure
the prototype for ip_randomid() is made visible.
* Add new sysctl to enable randomized IP-ids, provided the kernel was
configured with RANDOM_IP_ID. (The sysctl defaults to zero, and is
a read-only zero if RANDOM_IP_ID is not configured).
Note that the implementation of randomized IP ids is still defective,
and should not be enabled at all (even if configured) without
very careful deliberation. Caveat emptor.
by the application, all NetBSD interfaces are made visible, even
if some other feature-test macro (like _POSIX_C_SOURCE) is defined.
<sys/featuretest.h> defined _NETBSD_SOURCE if none of _ANSI_SOURCE,
_POSIX_C_SOURCE and _XOPEN_SOURCE is defined, so as to preserve
existing behaviour.
This has two major advantages:
+ Programs that require non-POSIX facilities but define _POSIX_C_SOURCE
can trivially be overruled by putting -D_NETBSD_SOURCE in their CFLAGS.
+ It makes most of the #ifs simpler, in that they're all now ORs of the
various macros, rather than having checks for (!defined(_ANSI_SOURCE) ||
!defined(_POSIX_C_SOURCE) || !defined(_XOPEN_SOURCE)) all over the place.
I've tried not to change the semantics of the headers in any case where
_NETBSD_SOURCE wasn't defined, but there were some places where the
current semantics were clearly mad, and retaining them was harder than
correcting them. In particular, I've mostly normalised things so that
_ANSI_SOURCE gets you the smallest set of stuff, then _POSIX_C_SOURCE,
_XOPEN_SOURCE and _NETBSD_SOURCE in that order.
Tested by building for vax, encouraged by thorpej, and uncontested in
tech-userlevel for a week.
class, so in a C++ environment rename the ip_opts member to Ip_opts as
observed in several other implementations; from Jon Olsson in
PR toolchain/19880.
Don't copy ttl from the inner packet to the encapsulating packet. Make
the outer ttl sysctl'able. This should close PR 14269 from Jasper Wallace
(change partly from there) and it makes traceroute work over gre tunnels.
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc. The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list. This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also. The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
RFC2553/2292-compliant header file path, now the following headers are
forbidden:
netinet6/ip6.h
netinet6/icmp6.h
netinet6/in6.h
if you want netinet6/{ip6,icmp6}.h, use netinet/{ip6,icmp6}.h.
if you want netinet6/in6.h, you just need to include netinet/in.h.
it pulls it in.
(we may need to integrate them into netinet/in.h, but for cross-BSD code
sharing i'd like to keep it like this for now)
due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
address zero of each net/subnet is a broadcast address.
(The default value is nonzero, which preserves the current behavior).
This can be set using sysctl; the boot-time default can also be
configured using the HOSTZEROBROADCAST kernel config option.
While we're here, defopt HOSTZEROBROADCAST and SUBNETSARELOCAL
* IP_PORTRANGE socket option, which controls how the ephemeral ports
are allocated. it takes the following settings:
IP_PORTRANGE_DEFAULT use anonportmin (49152) -> anonportmax (65535)
IP_PORTRANGE_HIGH as IP_PORTRANGE_DEFAULT (retained for FreeBSD
compat reasons, where these are separate)
IP_PORTRANGE_LOW use 600 -> 1023. only works if uid==0.
* in_pcb flag INP_ANONPORT. set if port was allocated ephmerally
* support sysctl net.inet.ip.anonportmin (lowest ephemeral port)
and net.inet.ip.anonportmax (highest ephemeral port).
these can't be set to >65535, < IPPORT_RESERVED (unless IPNOPRIVPORTS
is defined), and anonportmin has to be < anonportmax.
* use a cleaner way of only cycling through the available set once;
this will be useful for when a random allocation scheme is used
* define IPPORT_ANON{MIN,MAX} instead of IPPORT_USER{LOW,HIGH}
routed packets. This currently defaults to `drop,' but once we
verify that all applications that rely on determining remote IP
addresses for authentication are dropping the connection when they
see a source route option (not just disabling the source route
option), we can turn this back on and conform with the host
requirements.
interface using a sockaddr_dl in a control mbuf.
Implement SO_TIMESTAMP for IP datagrams.
Move packet information option processing into a generic function
so that they work with multicast UDP and raw IP as well as unicast UDP.
Contributed by Bill Fenner <fenner@parc.xerox.com>.
Darren Reed <darrenr@vitruvius.arbld.unimelb.edu.au> in PR #1227.
This change is slightly different than the one submitted by Darren in
that the DIRECTED_BROADCAST compile-time option will behave like it used
to so that existing configurations utilizing it won't have to change.
jonathan