Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
69,066 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

8410 Commits

Author SHA1 Message Date
augustss 807228a4d8 Make attach message correct for non-umass devices. 
Handle RBC (a SCSI subset).
 2000-08-12 14:52:44 +00:00
augustss 3fff1255ea Add some more vendors and devices. 2000-08-12 14:51:01 +00:00
augustss 124bec855a Minor whitespace change. 2000-08-12 14:35:20 +00:00
tsutsui 23830f1e6c - Check CR_RST rather than ISR_TXRCMP and ISR_RXRCMP in sip_reset() 
- Add more delay after reset
- "Big endian mode" on SiS 900 seems broken so don't enable it;
  use htole32()/le32toh() instead
- Don't cast u_int16_t array to u_int8_t pointer
- Add some delay() to FILTER_EMIT macro in sip_set_filter()

Now SiS 900 works on my macppc.
 2000-08-12 07:38:40 +00:00
tls c9dc8413bb Make our policy WRT tagged queueing consistent and sane: ordered tags for sync writes, simple tags for all else. Should make ahc and adv a bit more reliable (metadata writes won't get reordered incorrectly...) and isp a bit more performant (it was using ordered tags all the time). 2000-08-11 21:31:19 +00:00
thorpej 8cb7deb85b Add support for the DEC DE422 Ethernet, which is a DEPCA 
attached to the EISA bus.  This board is commonly found
on Alpha Jensen systems.
 2000-08-11 02:27:07 +00:00
thorpej d561771013 Add missing copyright noticed (it ended up in eisareg.h by mistake). 2000-08-11 00:46:17 +00:00
thorpej 5310aa68b8 Oops, back out previous. It wasn't intended. 2000-08-11 00:44:37 +00:00
thorpej e207174eb0 Add functions to read EISA configuration data for MEM, IRQ, DMA, and IO. 
XXX Just error stubs on the i386 right now -- someone needs to write
XXX EISA BIOS code for i386.
 2000-08-11 00:43:18 +00:00
thorpej 30f7d691a0 Declare the ECU data in an MI location, so that drivers can 
use it.
 2000-08-10 23:30:08 +00:00
ad 19fd9da968 Define SIOC[SG]IFGENERIC in <sys/sockio.h>, as FreeBSD and OpenBSD do. 2000-08-10 11:48:41 +00:00
soren 363910c22b s/Toshiba America Info Systems/Toshiba/ since they are the main PCI issuer. 
Add new version of the Oboe FIR device.
 2000-08-10 01:55:57 +00:00
drochner a1b037bc3a recognize the i440MX mobile chipset's IDE interface 2000-08-09 13:23:07 +00:00
tv 389bf995b5 %b -> bitmask_snprintf() 2000-08-09 01:56:33 +00:00
mjacob 0dc8c1fb35 Remove ispcmd_slow routine- SCBUSACCEL routine will set/clear tag/wide/sync. 
Make some changes about where some things sit in the softc.
 2000-08-08 22:58:30 +00:00
mjacob 9766fcf2be Don't attempt to actually read SAF-TE temperature objects- nobody seems 
to be obeying the original spec as to what the numeric value means.

Temperature flags are unaffected- these are still the 'pseudo-thermometers'
and overtemp/undertemp warnings will be caught and translated to SES objects
here.
 2000-08-08 22:55:30 +00:00
mjacob 295864adef During probe, use SCBUSACCEL ioctl to adapters that support it to 
enable fast/wide/tagged.
 2000-08-08 22:46:03 +00:00
bjh21 4f33d5a8ab Register definitions for the C&T 82C710, 82C711 and 82C721, as used in 
the Acorn A5000, A4, A4000, A3010 and A3020.
 2000-08-08 22:14:53 +00:00
tv 91537bce4a sizeof(fmtstring) + 8 wasn't enough for the string; that won't cope with the 
printed version.  Make a little more room for the bitmask_snprintf() call.
 2000-08-08 19:59:41 +00:00
tv 2b3a50d3de %b -> bitmask_snprintf() 
Because this code is shared, add a macro for bitmask_snprintf() that
should expand to the equivalent snprintf() on non-NetBSD systems.  This is
only used in ?HCI_DEBUG cases anyway.
 2000-08-08 19:51:46 +00:00
tv 87ab5c42c5 %b -> bitmask_snprintf() 2000-08-08 19:42:40 +00:00
jeffs aaa5c58d70 Update arc map routine prototype to compile again. 2000-08-08 02:11:05 +00:00
drochner 78fa2d7e41 fix interrupt priority botch 2000-08-07 17:34:41 +00:00
billc aac52686f0 Manually edit the headers to show which version of pcidevs this was 
generated from.

XXX - this really should be automated
 2000-08-07 08:27:11 +00:00
billc 7ba2890ab8 Added PCI IDs for 3Com's Home Connect (3c450) and Office Connect (3cSOHO100). 
They both are register compat with later versions of the 3c905 (tornado/
vortex) series.
 2000-08-07 04:08:35 +00:00
briggs b103a8ca48 Label the buffer size as such on probe. 128 KB makes sense, but 4608 does not. 2000-08-06 00:19:04 +00:00
ad 8d37a29277 Regen. 2000-08-04 14:32:05 +00:00
ad fc2908cf8a Vortex Computer Systems changes, from OpenBSD: 
- Add product ID for GDT6518RS.
- Fix bogus product IDs.
 2000-08-04 14:31:40 +00:00
augustss daff45a51a Regen. 2000-08-04 11:57:59 +00:00
augustss c54b0fde7a Add ATEN serial adapter. 2000-08-04 11:57:34 +00:00
tsutsui ef86d29308 Add one more delay() to sip_read_eeprom(). 2000-08-04 09:30:56 +00:00
bouyer 8464bde7e8 If the SET_FEATURE for piomode is rejected, fallback to mode 0 instead of 
reporting an error.
This fixes the "piomode error (0x4)" problem with some ATAPI ZIP drives
reported on port-i386.
 2000-08-03 23:14:31 +00:00
nathanw fb20241fda When performing pci_config_dump: 
- Display the full value of 64-bit BARs.
 - Avoid displaying the upper 32 bits of 64-bit BARs as a separate 32-bit BAR.
 2000-08-03 19:58:55 +00:00
bouyer 1b00421876 Add quirk entry for NEDICOM CRD-BP2, from kern/10738. 2000-08-03 12:36:08 +00:00
bouyer a8421d4787 Some W83781 have ID 0x11 instead of 0x10; handle these too. 
Restore printing sdata for each sensors if DEBUG.
 2000-08-03 09:27:01 +00:00
castor b6dd28b4ce Support some differences in the Macronix 98715AEC-C and E chips from the other 
98715* series.

The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.

Also, start integrating fixes where media changes on an adapter
under load may fail.  There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
 2000-08-03 03:07:30 +00:00
mjacob cb4d63d57c More compilation breakage in the non-DEBUG case 
(from Castor Fu <castor@geocast.com>)
 2000-08-03 03:00:04 +00:00
jeffs e97c2066ab Add options DDB_BREAK_CHAR. This overrides break on the serial console 
break character with the supplied one.  This is useful for cases where
break is hard to generate, or you are connected to a PC that "sends"
breaks when power cycled.  For this mode in com, interpret break char
in the polling section, which allows entry into the debugger before
the tty is opened.  Only supported in the com driver currently.
 2000-08-03 00:30:47 +00:00
bouyer de378db998 W83781D: Explicitely reselect bank0 before using "value RAM" registers. 
Hopefully this will make the W83781D works.
Also use common functions to set up fan & temp info[] & sensors[] for
the W83781D.
 2000-08-02 22:20:41 +00:00
bouyer e445e43ddc Add support for the W83697HF - basically a W83627HF with only 2 temp sensors. 2000-08-02 21:50:37 +00:00
bouyer 46c3f0204d PCIIDE_CMD0646U_UDMA->PCIIDE_CMD0646U_ENABLEUDMA for consistency with 
PCIIDE_AMD756_ENABLEDMA
defopt PCIIDE_CMD0646U_ENABLEUDMA, PCIIDE_AMD756_ENABLEDMA,
    PCIIDE_CMD064x_DISABLE
Fix a typo pointed out by John Hawkinson
 2000-08-02 21:49:09 +00:00
bouyer bd0766459c Add support for the CMD PCI646U. Linux claims that this driver is brocken 
with UDMA, so enable Ultra-DMA only if "options PCIIDE_CMD0646U_UDMA" is set.
 2000-08-02 20:23:45 +00:00
mjacob 1ae072f471 Fix bonehead bug for compiles w/o DEBUG set 
(thanks to KANETA Shin'ichi <kaneta@cr.chiba-u.ac.jp>)
 2000-08-02 17:39:50 +00:00
mjacob 068c76fc80 Core version 2.0 (platform version 1.0) rewrite of ISP driver. Some 
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
 2000-08-01 23:55:09 +00:00
bouyer 76c77aca38 Add support for the CMD PCI0646U2, an Ultra/33 version of the 0646. 
Note: there's also a PCI0646U, for which I don't have docs for now.
 2000-08-01 21:02:55 +00:00
briggs 02e3c1ef40 Use bus_space_read/write_multi_stream_2 for FIFO instead of bsr/w_multi_2. 2000-07-31 22:48:49 +00:00
gmcgarry f21a75dee3 XIDEBUG_CONFIG -> XID_CONFIG. From R.Massar@Fh-Worms.DE 2000-07-31 21:49:47 +00:00
ad 067f5e9814 Previous would have misbehaved if polled commands overlapped. 2000-07-31 13:16:34 +00:00
enami 35913a898c Sync internal state and ifmedia state. Addresses PR#10424. 2000-07-31 03:25:11 +00:00
briggs 3628f3e00c Make sure that we do not call bus_space_*_multi_* with zero count. 2000-07-31 02:14:47 +00:00
bouyer 100a4a6b22 Add support for the W83781D and W83782D hardware monitors. 2000-07-30 22:23:53 +00:00
briggs e6dde2bd42 Add MII support to smc91cxx driver. This is supported for the 91c100 
and 91c100FD (FEAST) controllers.  Existing controllers should continue
to work as they have.  Added the card's memory to the probe message.
 2000-07-30 21:34:47 +00:00
bouyer 538126d75a swap lm_match() and wb_match(), as wb_match() is more restrictive. 
Otherwise a winbond can be mis-probed as a lm if it has the rigth device ID.
Problem reported by Bernd Ernesti.
 2000-07-30 17:22:26 +00:00
takemura b5e3ec56a8 Remove src/sys/dev/apm/*. (They've gone to arch/hpcmips/dev/apm.) 2000-07-30 04:41:15 +00:00
jhawk d569dc2fb5 Whitespace fix (space rather than tab after #ifdef) 2000-07-29 17:49:08 +00:00
jlam cbd3022e31 Make this compile without PUCCN defined. 2000-07-29 17:43:38 +00:00
castor b2bf026f39 Guard the console code in puc.c with the defopt PUCCN so we can 
use the puc driver without having the com drivers.
 2000-07-28 20:43:45 +00:00
drochner 457d8d7c7e print parent device name too, so we know which socket a card was probed at 
and whether pcmcia or cardbus
 2000-07-28 19:17:02 +00:00
thorpej 081f57c846 Handle booting without a serial expander box connected. 2000-07-28 06:10:54 +00:00
martin 10debdeb9c Fix to autonegotiation problem with some fxp cards. Fix found and reported 
by Erich T. Enke et al. on current-users. This fixes PR 10550.
 2000-07-27 22:14:48 +00:00
bouyer e955a714ba Add support for the W83627HF: lm7x like, but with more sensors, and more 
registers.
 2000-07-27 21:49:22 +00:00
bouyer ca5b9b0c22 Force 64bit arithmetic for timeout computation; a 32bit int opverflows for 
large timeouts. Should fix PR kern/10575.
 2000-07-27 21:28:17 +00:00
bouyer a7d2293ea4 My 16 port boca seems to fail to update the interrupt bit in it's interrupt 
register for a port under high load. The effect is that the port is wedged
waiting for an interrupt that will never come.
Add a callout-based watchdog which periodically (hz/10) scan trough the ports
for missed interrupts.
Problem also noted by Chris Jones, and this fix also helped him.
 2000-07-27 20:08:47 +00:00
bouyer 0154cbce36 Ops, forgot this one: Add interrupt disable bit #define for HPT370 2000-07-27 15:26:16 +00:00
bouyer aa0d4a41d5 HPT370: clear disable interrupt bit; make it works in Ultra/66 mode. 2000-07-27 14:28:45 +00:00
ragge acb96154d0 More intelligent BI vector assignment. 2000-07-26 12:41:40 +00:00
pk 34604a9f79 No point in forcing SECDAY to be a long int. 2000-07-26 11:07:45 +00:00
onoe 188122248a I've confirmed that Samsung MagicLAN SWL-2000N (PRISM-II) works 
with WEP enabled.
 2000-07-26 07:28:56 +00:00
onoe cc8e6675e2 add Samsung MagicLAN SWL-2000N 2000-07-26 07:24:15 +00:00
jeffs fa8ff381d8 Add code to allow the PCI com serial ports to be used as the system 
console.  This is not enabled by default, and is turned on with
options PUCCN.  Done by castor@netbsd.org.
 2000-07-25 23:18:42 +00:00
pk 969b4bc568 Define the todr(9) interface. 2000-07-25 22:38:14 +00:00
pk 4ba0c6b55c New time-of-day clock chip drivers. These implement the todr(9) interface. 2000-07-25 22:33:02 +00:00
onoe 27d41a1de3 Map txrate for prism2, where each bit is apparently assigned to the 
corresponding rate; 1Mbps, 2Mbps, 5.5Mbps, 11Mbps.
 2000-07-25 12:04:29 +00:00
gmcgarry 5463f7b316 Improve the model identification and match. Addresses PR-10485. 2000-07-24 21:50:10 +00:00
gmcgarry b023fdd2b7 Regen. 2000-07-24 21:47:40 +00:00
gmcgarry 0f37cacaf1 Add entries for all Xircom ethernet models. 2000-07-24 21:45:00 +00:00
bouyer 10afc4e0a8 create a funcion, siop_busreset(), to reset the scsibus. 
Reset the scsi bus at attach time, to be sure all devices start in narrow/async
mode.
Defer sync/wide negotiation until after whe have a valid
xs->sc_link->device_softc, so that we can honnor the NOSYNC/NOWIDE quirks.
 2000-07-24 15:15:00 +00:00
scw 197f977187 Pass the level and vector to vme_intr_map() in the correct order. 2000-07-24 15:00:41 +00:00
ad 74cf7af4a9 Increase polled command timeout to 2s. 2000-07-24 12:28:31 +00:00
mycroft f9f72ecf9a Purge C++-style comments. 2000-07-24 04:28:51 +00:00
augustss a119131555 Be a little more explicit and careful about setting links in TDs and QHs. 2000-07-23 19:43:37 +00:00
jonathan 5f7778cd1e * Add entries for older Yamaha YMF chips (724, 740) plus the 
newer steppings (740C, 724F) which use the same microcode as the
  DS-1S/DS-1E.
Regen.
 2000-07-23 00:18:24 +00:00
jonathan 2169753fc5 * Add entries for older Yamaha YMF chips (724, 740) plus the 
newer steppings (740C, 724F) which use the same microcode as the
  DS-1S/DS-1E
 2000-07-23 00:14:15 +00:00
pk 19bd1749ad Add short device descriptions in comment lines. 2000-07-22 21:25:52 +00:00
is 8be010f00d - Big endianness cleanup: 
a) use stream methods when transferring data via the MEMPORT into/out of
the chips buffer memory
b) use htole16/le16toh when interpreting 16bit values in the chips memory

Both where NOPs on i386 machines, which is why this worked before on the
test machine(s), but would break when on a big-endian machine.
 2000-07-21 13:54:38 +00:00
onoe afa5b645c2 add support for SIOCS80211NWKEY and SIOCG80211NWKEY. 2000-07-21 04:48:55 +00:00
abs c9355a957c Add the pccard controller for a Toshiba Portege drive. No vendor ID, no 
product ID, and in this temporary loan, no bleeding power supply so it
can only probe the controller and not the drive. Still, its something.
 2000-07-20 23:20:01 +00:00
scw a1b8e79bb1 Take advantage of generic soft interrupts, if available. 2000-07-20 20:44:50 +00:00
ad b60bcd873d Regen. 2000-07-20 14:47:35 +00:00
ad d3b42c18e4 Add what is apparently ESS's old vendor ID and corresponding product ID for 
the Maestro 1.
 2000-07-20 14:46:51 +00:00
bouyer 6e88d58524 Make it compile when PCIIDE_AMD756_ENABLEDMA is defined. From kern/10555 
by MURATA Shuuichirou.
 2000-07-20 12:19:41 +00:00
tsutsui 83f94dc417 Regen. 2000-07-20 07:11:28 +00:00
tsutsui 4af0fbdb1a Add PMAG-JA framebuffer. 2000-07-20 06:38:39 +00:00
deberg 0d5d0bd93a don't define LIST_FOREACH, it's in sys/queue.h now. 2000-07-20 03:47:56 +00:00
mjacob c47c527343 add some more CTIO flags 2000-07-19 22:19:23 +00:00
mjacob 0615788781 zero result queue entry when done if debugging. 
don't do an isp_notify_ack if we're not at run state.
 2000-07-19 22:19:00 +00:00
mjacob 93379fb341 fix mislabelled error case 2000-07-19 22:18:02 +00:00
pk f9e6c9cf42 Fixx off-by-one error in handlereset(). 2000-07-19 16:07:00 +00:00
nathanw 554019cd4b More printf format munging for off_t: when printing as %lld, cast to long long. 2000-07-19 13:44:24 +00:00
augustss 00cafd0569 Add MIDI support. From Tatoku Ogaito. 2000-07-19 09:58:45 +00:00