3f0c6192ac
Also register rquota version 2.
2003-02-14 14:56:45 +00:00
78964c9832
rexecd is IPv6 capable (not sure who will be using it though)
2002-06-05 23:06:51 +00:00
e66c6ebb83
committed by mistake
2002-06-05 21:47:15 +00:00
1890825b44
uid/gid for sendmail 8.12.x.
...
disallow chroot priv accounts from being used for ftp.
2002-06-05 21:32:25 +00:00
53805e1cd5
uucpd supports IPv6
2001-11-21 10:27:53 +00:00
d768fd88a7
Enable logging options for (commented out) uucpd and fingerd by default.
...
Addresses misc/10219 by Jim Bernard.
2001-05-06 12:08:57 +00:00
a19c4c9523
Cleanup formatting of the rpc services.
2001-04-06 00:33:33 +00:00
ceb66a1751
Add a tcp6 entry for hpropd.
2001-04-06 00:29:58 +00:00
dff641d8e0
kpasswd is a "wait" type service.
2001-03-25 22:33:15 +00:00
c1d9ab7c34
comsat is ipv6 ready
2001-03-08 01:27:24 +00:00
b60001d78d
move tcp6/udp6 entries upwards so that they do not get out of sync with
...
IPv4 services. add kerberos-adm and internal services (like echo) on tcp/udp6.
2000-12-31 06:06:50 +00:00
31d5237f30
Now that kpasswdd works from inetd, also correct the entry: kpasswdd is an
...
udp service, not tcp.
2000-09-13 11:34:57 +00:00
6636b19ffd
Add (commented out) hprop service, along with a short explanation
...
of when to enable it and why.
2000-08-06 20:35:13 +00:00
ac1bd4275a
Remove the (not supported) krbupdate service, and add (commented out)
...
kerberos-adm.
2000-08-05 00:48:15 +00:00
1840f1fa18
Allow a higher count of started services for broadcast RPC services. Since
...
rpcbind version 3 and 4 clients will try broadcasts using both the old
and new protocol for IPv4, the double amount of packets may come in,
causing bogus "service looping" events in inetd.
2000-06-22 11:35:13 +00:00
b88d86b1b6
Comment out telnet, ftp since they use cleartext passwords (discussed
...
recently on tech-net, no objection raised except that it doesn't go
far enough..)
Fix misc/10219 as suggested in PR: add -L to rlogind and -l to tftpd
command lines to enable logging.
2000-06-06 12:04:02 +00:00
02cd59a751
* Portmap is now called rpcbind.
...
* Add IPv6 RPC entries to inetd.conf (commented out by default, as the others)
* Add netconfig file, needed for TI-RPC code.
2000-06-02 22:54:08 +00:00
ff0601b77a
remove commented-out entry for mountd, since whilst support for inetd
...
was added to mountd in mountd.c::1.6, it was removed as part of the
4.4-lite merge in mountd.c::1.12. if the entry was uncommented your
machine might clag up after a showmount as inetd spawned lots of
mountd processes...
2000-05-13 07:28:09 +00:00
f539e10ff8
enable IPv6 ftp and telnet by default.
...
it makes more sense to me as we have INET6 in kernel, and we have ftp4/telnet4
enabled by default. maybe I'm biased:-)
2000-02-28 17:25:42 +00:00
b32545eabf
add tcp6 lines for rshd/rlogind.
2000-02-09 11:05:04 +00:00
6badb9eb2b
add comment about IPv4/v6 dual stack support (enable both tcp and tcp6).
1999-12-20 12:43:17 +00:00
fbbc23fa6a
Disable everything except ftpd and telnetd by default.
1999-11-05 11:16:20 +00:00
6933332596
Use a colon to seprate user and group name pairs.
1999-10-06 21:55:54 +00:00
d61e19af02
GENERIC kernel does not ship with IPv6, so comment out tcp6/udp6 entries.
1999-10-05 10:44:28 +00:00
47b0e5ff1d
IPv6 support.
1999-07-12 20:17:09 +00:00
90db061921
add telnet on tcp6.
1999-07-02 06:32:32 +00:00
5202885909
provide sample lines for IPv6 services (at this moment ftpd and fingerd)
1999-07-02 06:05:21 +00:00
2fe3ffc188
Modify (commented out, pre-existing) identd line to start identd `nowait'
...
for those who want to use tcpwrappers appropriately.
Resist temptation to add -L"something appropriate"
1999-05-18 22:20:07 +00:00
49a7341d45
make these changes to the default user.group:
...
- internal services run as `nobody'
- rpc.rusersd and rpc.sprayd run as `nobody'
- rpc.rstatd run as `nobody.kmem'
- rpc.rwalld run as `nobody.tty'
1997-10-07 12:45:32 +00:00
cf443f3572
add hunt(6) entry (commented by default)
1997-10-04 09:16:00 +00:00
ea18ad7974
Run ntalkd as nobody.tty
1997-06-29 19:20:20 +00:00
47f9ae0ae6
mountd was moved to /usr/sbin ; pointed out by Thorsten Frueauf.
1997-04-03 11:00:16 +00:00
ef538c3176
cleanup Lite-1 merge
1997-02-15 10:02:07 +00:00
84250ffb70
Turn off echo, discard, and chargen by default.
1997-01-20 06:10:24 +00:00
ca69bed024
turn off internal udp services, and log rshd connections; ideas from openbsd.
1996-12-29 03:32:44 +00:00
ecfa4355a6
RCS id police.
1996-05-08 17:19:17 +00:00
9f19d8f938
bootpd can run from the shell, too, and thus lives in /usr/sbin, not
...
/usr/libexec.
1995-09-13 17:47:55 +00:00
69aaa6cd28
Turn off idented by default.
1995-06-10 20:33:05 +00:00
170153e198
The tftpd daemon has been changed to use setgid() & setuid() to
...
explicitly set the user and group IDs to non-priveleged values. This
was done because the chroot() call used when the secure (-s) option is
used can only be done by the superuser.
This change now requires tftpd to be executed by root. So the
inetd.conf entry has been changed to start it that way. I also
added -s /tftpboot arguments, so people who uncomment the tftpd
entry without realizing it's security ramifications won't open
thier whole systems to unauthorized access.
1995-06-04 20:55:39 +00:00
4fcfb13e18
disable kerberos version of rsh/rlogin, because things don't work properly
...
if they're enabled and the programs don't support kerberos (by default,
the NetBSD programs don't.)
1994-12-23 15:12:39 +00:00
06e90a168a
sprayd & rquotad: disabled by default
1994-06-24 07:46:19 +00:00
6cc6cf15ee
move bootpd from othersrc to libexec. add bootptab file
1994-04-18 05:15:36 +00:00
b5a980c0d9
fix that last inetd.conf
1994-02-23 00:03:20 +00:00
422a122004
remove reference to old talk protocol. will result in better failure
1994-01-24 18:56:17 +00:00
26af90abc6
listen for rusers/2-3; no more version 1
1993-11-21 19:02:03 +00:00
42fd09c8e9
it is clear that mountd started from inetd does not work
1993-09-01 09:43:09 +00:00
6ce6685814
mountd is now started by inetd.
1993-08-25 02:44:11 +00:00
2f3bcc6ff6
Add entries to start rpc services.
1993-06-11 00:38:48 +00:00
867ef8b92e
rexecd was on in the default installation. rexecd is not your a secure friend.
...
those who want it should have to turn it on explicitly
1993-04-10 11:30:05 +00:00
61f282557f
initial import of 386bsd-0.1 sources
1993-03-21 09:45:37 +00:00
bouyer