Commit Graph

3023 Commits

Author SHA1 Message Date
hannken 244266226c Fix typo. 1998-04-07 13:59:38 +00:00
hannken 47e698143a Oops. Forgot RCS ident and copyright. 1998-04-07 13:57:56 +00:00
hannken 64f1bb73d6 Initial import of MI keyboard translation for dev/wscons. 1998-04-07 13:43:16 +00:00
matt b80f703f77 Fix problem with promicuously received packets. (ie. give them to bpf
but not fddi_input).
1998-04-07 13:32:06 +00:00
enami 848e8406bc The fe driver is spilt into ate, fmv and mbe, and this file is no longer
necessary.
1998-04-03 04:46:46 +00:00
enami 910e6420e0 Delete entry for fe*. 1998-04-03 04:44:39 +00:00
mycroft eb466ba47f Make sure to unload and recycle the DMA map for a bad received packet.
This was (indirectly) the reason for machines `hanging' (actually, looping in
tulip_rx_intr()) with de cards.
1998-04-02 13:49:32 +00:00
thorpej 5c85ae8778 Don't establish the interrupt handler just to read the MAC address. 1998-03-31 08:13:34 +00:00
pk be4108fec1 Replace direct `sparc_bus_map()' calls with bus space map method. 1998-03-30 14:21:38 +00:00
hannken b70a7e1752 Didn't compile: add variable `bit' removed by mycroft. 1998-03-30 10:35:03 +00:00
mycroft d4da63c6c3 Eliminate cs_heldchar. It is not necessary in my version of the driver. 1998-03-30 02:41:21 +00:00
mycroft 5d8b98c7b1 Use a 4-bit table to speed up the CRC even further, without increasing the
code size too much.
1998-03-29 23:02:27 +00:00
mycroft 8f597a8744 Oops; make the table const. 1998-03-29 22:36:42 +00:00
mycroft a6b8b01d96 Use a 4-bit table to speed up the CRC even further, without increasing the
code size too much.
1998-03-29 22:34:27 +00:00
mycroft a3b1c4c87a Optimize the address CRC routines a bit. 1998-03-29 22:21:12 +00:00
mycroft fe7f32954b Optimize the address CRC routines a bit. 1998-03-29 22:08:03 +00:00
enami 5c8a9ac444 Attach aic at isapnp. 1998-03-29 08:13:43 +00:00
enami 5124116592 ISAPnP attachment for aic6360 (tested with AHA-1520B). 1998-03-29 08:11:50 +00:00
christos e0436952f0 Split out the verbose printing of scsi messages, so that user programs
can use the printing routines.
1998-03-28 21:57:08 +00:00
thorpej 686a1a1177 Regen. 1998-03-28 06:39:13 +00:00
thorpej 515d7f04bf Add the Contaq/Cypress 82C693 PCI-ISA bridge. 1998-03-28 06:38:46 +00:00
cgd 2f8f14b311 check vendor against PCI_VENDOR_INVALID instead of 0xffff.
Suggested by Soren S. Jorvang.
1998-03-28 02:24:04 +00:00
cgd 6108f60999 regen 1998-03-28 02:10:40 +00:00
cgd 3371d8f00f fix bogus produce name tags for 82371FB_ISA and 82371FB_IDE (were 82471FB_*).
Pointed out by Soren S. Jorvang.  Rename "BAD" vendor id to "INVALID".
1998-03-28 02:09:29 +00:00
cgd 9264961c87 add a short delay (5ms) after ATAPI software reset is done, suggested by
Soren S. Jorvang <soren@t.dk>.  Apparently some devices Really Want this.
1998-03-27 19:32:15 +00:00
drochner 46f85eeab2 let all 8 bits go through 1998-03-27 18:26:22 +00:00
drochner cbff98f7ff fix max() vs min() confusion at 2 places 1998-03-27 18:22:36 +00:00
thorpej b9db388b0f don't use variables declared _inside_ DEBUG in code _outside_ DEBUG 1998-03-26 00:49:03 +00:00
leo 0e4dce88d4 Conditionalize badblock handling on 'HAS_BAD144_HANDLING'. Some ports
(like atari) do not support it.
1998-03-25 09:58:24 +00:00
mjacob 57ca254137 some minor debug printout changes 1998-03-24 23:37:53 +00:00
mhitch 8adf8abfea Enable another error message before the driver reboots the machine. It was
not being printed if not compiled with DEBUG.  Now all situtiations where
the driver gives up should display a message before the reboot.
1998-03-24 20:49:22 +00:00
msaitoh 47d94e4676 fix typo 1998-03-23 16:57:21 +00:00
augustss dbef68a11b Update for __BROKEN_INDIRECT_CONFIG. Still untested since it is so hard
to find testers for these old cards.
1998-03-23 01:00:21 +00:00
mjacob fc27ffd92c update some debugging stuff- also turn off possible ULTRA mode for 1020s 1998-03-22 22:02:29 +00:00
mycroft ff0635ab25 Fix error in previous change. 1998-03-22 19:36:52 +00:00
drochner 3c346a45ca The keyboard controller's address range is 5 bytes long - reflect this
here.
1998-03-22 15:44:02 +00:00
drochner 2390332103 Devices attached to the PC keyboard controller (or its aux port),
for use with the new wscons code.
(keyboard map management will change)
1998-03-22 15:41:27 +00:00
drochner b5ec34f082 MI driver for the infamous PC keyboard controller, primarily for use with
the new wscons code (but may be interfaced with other drivers as well).
needs testing
1998-03-22 15:25:15 +00:00
drochner 013507e321 PCI frontend for sys/dev/ic/vga.c 1998-03-22 15:16:18 +00:00
drochner 065733619a ISA frontend for sys/dev/ic/vga.c 1998-03-22 15:14:35 +00:00
drochner 3a43fe7109 initial import of VGA driver backend for use with the new wscons code 1998-03-22 15:11:49 +00:00
drochner b31e63865f Initial import of cgd's new wscons code. 1998-03-22 14:24:02 +00:00
drochner 52c701add6 Make this file compile without BROKRN_INDIRECT_CONFIG.
(Brute force - device probe always returns 0. Should be fixed soon.)
1998-03-22 12:50:20 +00:00
drochner 5aaf839bc3 Make this file compile without BROKRN_INDIRECT_CONFIG.
(Brute force - device probe always returns 0. The driver is replaced
by if_ate, if_fmc and if_mbe and is here for reference only.)
1998-03-22 12:48:41 +00:00
jonathan 9a8dbd75df Clone lk20.h (keycode definitions) to /sys/dev/dec.
Update source pmax files accordingly.
cvs remove old pmax/dev/lk201.h.
1998-03-22 09:27:07 +00:00
enami a59689c939 Attach device `mbe' at bus `pcmcia'. 1998-03-22 04:39:56 +00:00
enami e26f2ce65b Define new device `ate' and `fmv'. 1998-03-22 04:38:42 +00:00
enami c02747ba06 PCMCIA bus attachment for MB8696x based Ethernet card. 1998-03-22 04:32:27 +00:00
enami 2b5f7351d2 Split Fujitsu MB9696x based ethernet card driver into bus
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
enami 1164bf0fb5 Define TPLFE_TYPE, which is sub code for CISTPL_FUNCE, for LAN card. 1998-03-22 04:07:43 +00:00