Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
58,278 Commits 606 Branches 0 Tags 3.1 GiB
25c48ec858
Commit Graph

68 Commits

Author SHA1 Message Date
hubertf
92bd305e4a Add note that "fdisk -i" is the same as "fdisk /mbr" on MSDOS. 1999-10-11 01:04:57 +00:00
enami
d758f82f45 Oops, needs an operator. 1999-09-25 04:27:55 +00:00
enami
cd2531c01e Build fdisk also on hpcmips. 1999-09-25 04:26:28 +00:00
enami
62d623bfc4 Don't decend into the subdirectory mbr_bootsel except i386, 
since it currently doesn't contain MI thing and not compile
on ofppc box (thanks Wolfgang) and probably on bebox box.
 1999-09-25 04:18:20 +00:00
simonb
2bb88f2837 Fix tyop and clean up usage of commas a little. 1999-09-21 12:09:25 +00:00
soren
b49886ea7a Update usage(). 
Prevent buffer overflows when configuring boot selector.
Cycle through partitions when entering boot names.
Use '<UNUSED>' consistently.

Reviewed by: fvdl
 1999-09-06 23:58:59 +00:00
sakamoto
8ecadeaecd Build fdisk on bebox and ofppc(replaced powerpc). 1999-07-02 17:48:26 +00:00
thorpej
7d344bb51b Make sure the boot selector actually gets updated if you only change 
the timeout and/or the default menu choice.
 1999-06-04 18:59:15 +00:00
fvdl
6a2c64449b Sanity check the drive number in %dl and use it instead of blindly 
assuming disk 0.
 1999-05-02 13:48:30 +00:00
fvdl
7d18a1432b Tighten check for bad drive numbers to avoid passing garbage to the 
2nd stage loader.
 1999-05-02 12:20:01 +00:00
fvdl
c0042f7871 Because of space constraints, error messages got shortened. Reflect this 
in the manual page.
 1999-05-02 12:18:40 +00:00
fvdl
cbf8e59c01 Make check if we need int13 extensions for the bootselector more correct. 1999-05-02 12:17:48 +00:00
fvdl
5a48cda98a Remove confusing entry about cylinder boundaries. 1999-05-02 12:17:13 +00:00
ross
255793452f Since fdisk/mbr contains a man page, we need to descend into it regardless 
of which ${MACHINE} we are.
 1999-05-02 04:42:47 +00:00
christos
8eeaf82ae4 - Use the proper multiply instructions so that we don't get truncated. 
- Fix comparison, which did not work before.
 1999-04-30 15:29:44 +00:00
fvdl
a6f7895b92 Only use int13 extensions if the sectors can not be read through the 
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.

For the bootselector, there was no space to get the CHS info from
the BIOS. Instead, use a flag that can be set by fdisk. fdisk will
set it if one of the partitions on the disk is out of CHS reach
for this disk/BIOS, so that the bootselector will use int13 extensions.
This isn't so bad, because it needs to be configured via fdisk anyway.

Change the mbr manualpage to reflect some shorter error messages.
 1999-04-28 23:27:01 +00:00
fvdl
48c1c25ba5 Make the bootselector configurable by fdisk. Add a -B flag to this 
effect (i386 only of course). Also change one branch in the
bootselector code to an explicit 16 bit one, and check both
the boot menu and partition tables to see if the partition
requested by the user should be booted. This check just in case,
should the bootselector menu and partition table get out of sync
somehow. (mmm, bytesqueezing)
 1999-04-17 01:38:00 +00:00
fvdl
7adcf112ca Add a manual page describing the MBR and the bootselector. 1999-04-15 22:35:19 +00:00
fvdl
fa9bff9be1 Add and build a bootselecting MBR (i386). 1999-04-15 22:31:23 +00:00
christos
22f9ed8d9b Make it work for both elf and a.out 1999-03-24 16:02:41 +00:00
mycroft
f6590b22cd Clean up SYNOPSIS formatting. 1999-03-07 11:02:05 +00:00
lukem
dcab0210a0 convert from NOxxx= to MKxxx=no. 
include <bsd.own.mk> if testing a MKxxx variable.
 1999-02-13 02:54:17 +00:00
perry
9a8b75daeb add BeOS entry, from URA Hiroshi, PR 6974 1999-02-09 19:11:46 +00:00
ws
f0a4bb6818 Use the drive parameter from the partition table 
to support booting from the second disk.
 1999-02-08 21:52:43 +00:00
ws
faf59c0aba Initialize drive number in DL (not done by some BIOSs). 
If you want to use 32-bit addresses, be sure to init the high bits, too.
Some additional register saves around BIOS calls (just in case).
 1999-01-28 14:14:04 +00:00
thorpej
3a6110fd02 Use <sys/disklabel_mbr.h>. 1999-01-27 21:41:31 +00:00
jonathan
9fe4d42638 Set otherwise-unused global variable `disksectors' to disklabel.d_secperunit. 
Change   fdisk -S to  emit disksectors as DLSIZE (for benefit of sysinst.)
 1998-11-08 00:29:08 +00:00
ws
1cd9ec3c71 Separate master bootcode from fdisk. 1998-10-15 15:23:23 +00:00
ws
3cdac6d69c Separate master bootcode from fdisk. 
Add int13 extension support to master bootcode.
 1998-10-15 15:22:13 +00:00
ws
ba2f852285 Completely zero out a partition table entry, 
if type, start and size are given as zero.
 1998-10-02 17:23:22 +00:00
ws
d8881a6f9a Automagically initialize boot code and partition table if not yet valid. 
Don't touch the partition table on -i, if previously valid.
 1998-09-28 15:44:18 +00:00
rvb
db826b28d9 Dont report more than 1023 cylinders for DOS/BIOS because 
the code below will truncate to a 10 bit field.  This
can cause major problems later for DOS.
 1998-08-10 18:46:29 +00:00
drochner
c0f9ff25e7 Use the new NetBSD partition ID for first time setup of an MBR. 1998-02-25 14:19:12 +00:00
drochner
707f944948 update for new partition ID 1998-02-19 15:15:29 +00:00
drochner
43e4e2726a Add new NetBSD partition ID. 
Update information about partition types - add missing types, insert
"reserved" for IDs which are marked as "officially reserved" in other
lists.
Sources of information:
-"How it Works -- Partition Tables" by Hale Landis <hlandis@ibm.net>
-Ralph Brown's interrupt list
 1998-02-19 14:47:43 +00:00
ghudson
70698891e2 When estimating the number of cylinders in the BIOS geometry, use the 
total number of sectors as reported by disklabel.d_secperunit rather
than multiplying out the disklabel geometry, which is less accurate.
 1998-02-07 16:19:16 +00:00
perry
34a98169f0 macroize BSD, NetBSD, FreeBSD and misc cleanup 1998-02-06 05:54:12 +00:00
mikel
b545bd186c Don't print "DOS partition initialized" if -S set; from Nathan 
Williams in PR bin/4893.
 1998-02-02 06:39:41 +00:00
enami
24ec6663fe Add missing cast. This is a minimum fix to avoid overflow which causes 
core dumps with some disk geometry.
 1997-12-22 01:54:07 +00:00
ross
2ac0cdeda9 Typos, English. 1997-11-26 04:26:27 +00:00
phil
a8d52993f0 Backout the prototype of opendisk(). 1997-09-30 17:29:40 +00:00
phil
c342d989c5 Prototype opendisk(). 1997-09-30 17:09:13 +00:00
lukem
216ef04613 switch to using opendisk(3) from libutil 1997-09-25 05:08:28 +00:00
lukem
2ddc10a0ab define WARNS?=1 for all of sbin/* 1997-09-15 12:45:47 +00:00
lukem
700617acfc correct use of various mdoc macros to cleanup resultant man page 1997-09-14 14:05:34 +00:00
lukem
6e61b15d9c * support `short'' names of disks (e.g, `sd0'') instead of requiring 
the full name (e.g, ``/dev/rsd0d'') a la disklabel(8) (where the code
  was effectively lifted from ;-)
* prefix hexadecimal numbers in output with '0x'
 1997-09-14 13:52:26 +00:00
phil
5388cd2717 Don't print some things if -f flag given. 1997-09-11 22:53:00 +00:00
phil
2d074efe44 -- add -b flag for setting fdisk's idea of BIOS geometry from command line 
-- cleanup so WARNS=1 works
-- man page updated to reality.
 1997-09-05 21:26:57 +00:00
phil
1b063875bf Upgrade for non-interactive use. Interactive use is nearly unchanged. 
-i no longer implies -u, -i now does not use the entire first track
because some BIOSes refuse to boot from a partition in the first track.
-s renamed to -S, new -s for non-interactive setting of a partition's
id, offset and size.  Updated documentation to match.
 1997-08-11 23:31:41 +00:00
phil
1145b74178 Add code for a -s flag where the output is a series of VAL=xyz lines 
so /bin/sh can "eval `fdisk -s`" and get variables defined with the
fdisk information.
 1997-07-29 08:31:31 +00:00