8b77995122
It is impolite to poll in a tight loop. (Thanks to Christos for noting
...
the problem.)
2000-08-19 19:51:17 +00:00
ff1bb25d60
Clarify a few things about parity. Add more documentation about RAID on RAID,
...
and root on RAID.
2000-08-10 15:14:14 +00:00
e828ccd7df
Add a .Sq for single quotes, instead of doing it by hand.
...
Fixes a formatting problem noted by Hubert Feyrer (Thanks Hubert!).
2000-07-05 02:42:39 +00:00
3fa8f52b84
In certain cases (e.g. where it makes sense) read/display the
...
component label for spare disks too.
2000-06-03 16:59:36 +00:00
f26e8d9a17
Slight wording improvement on the 'raidctl -R' case.
2000-06-02 04:11:46 +00:00
4d75110047
Make sure we handle the 'no progress' case properly.
...
Thanks to Manuel Bouyer for noting the problem (and supplying a patch!).
2000-05-31 00:47:30 +00:00
239e79a9ad
Fix up some single quotes that messed up a line. (Thanks Wiz!)
2000-05-29 03:40:43 +00:00
c4f772eecb
Obtaining component labels from spares is not supported yet, but add
...
some code that makes some progress in that direction.
2000-05-28 23:12:01 +00:00
0ce56710af
Cleanup ETA calculation stuff.
2000-05-28 22:22:11 +00:00
64ad6c882c
Have raidctl use the fine-grained progress info. ETA calculation stuff
...
needs to be cleaned up.
2000-05-28 00:49:35 +00:00
340761f659
Apply indent.
2000-05-23 01:03:05 +00:00
a53c712bd6
Build with WARNS=2.
2000-05-23 00:46:53 +00:00
632c1d5e7c
ioctl(2) commands are u_long, so do_meter() must take the same.
2000-05-23 00:33:13 +00:00
48a5c3efa9
Don't declare 'extern opt*' getopt variables.
2000-04-14 05:58:01 +00:00
807e453c32
When displaying component labels, indicate whether or not the set is
...
marked as being the one that should be used for the root partition.
2000-03-23 14:50:36 +00:00
680c384366
Update for 'options RAID_AUTOCONFIG'.
2000-02-26 19:43:07 +00:00
1f4cc78a38
Add a few more examples, and a summary.
2000-02-26 04:02:03 +00:00
f4f9f7bc66
More updates, spelling fixes, etc.
2000-02-25 22:38:51 +00:00
f1717bc7fd
First revamp of the docs. This is still work-in-progress. More to come
...
shortly.
2000-02-25 22:24:46 +00:00
3a374be745
Reorganize a few things. Make the general status ('-s') a bit more verbose
...
by including component labels, and less verbose by removing some other stuff.
2000-02-25 22:24:11 +00:00
268ef0a8e2
Document the new autoconfiguration switches, and update the Usage: line.
...
More doc changes expected soon.
2000-02-24 23:52:46 +00:00
5aee30c016
- support for autoconfig setup and / on RAID setup
...
- new parts are still work-in-progress (no docs yet either)
2000-02-13 04:55:30 +00:00
78798f9991
it's -> its
2000-01-22 14:48:43 +00:00
e5b5b86865
Nuke a debugging printf that I forgot to remove before last commit.
2000-01-09 03:06:35 +00:00
c714a07d22
- add '-v' (Verbose) option, which, most notably, provides
...
a spiffy lukemftp-inspired progress bar for parity re-writing,
reconstructs, copybacks, et al.
- make 'raidctl -P' wait until the parity has been updated before exiting
(it waited previously, but only because the parity re-write ioctl wouldn't
exit until the parity was successfully re-written)
2000-01-05 03:02:41 +00:00
ebf003eaf4
Typos (from OpenBSD)
1999-11-19 22:48:01 +00:00
b2af35bc2d
rf_MakeConfig succeeds only if it returns 0, not if it returns
...
values 0 or greater.
1999-08-15 03:18:19 +00:00
225f5a8b60
Display the parity status as part of the status ('-s') display.
1999-08-15 03:15:00 +00:00
67e8cf0262
No need to include rf_sys.h.
1999-08-13 03:37:42 +00:00
d0740fb357
Add two more options to raidctl:
...
-p check (and return) the status of the parity
-P check the status of the parity, and rebuild if necessary
Addresses PR#7494
1999-08-10 18:21:39 +00:00
180bbfd871
Move two functions from rf_strutils.c into rf_configure.c, removing
...
the need for rf_strutils.c.
1999-08-07 23:48:11 +00:00
efffe046a2
Move COPTS to CPPFLAGS. Nuke some no-longer needed compile options.
1999-03-26 00:46:05 +00:00
c2408285ae
Nuke unused code.
1999-03-26 00:45:01 +00:00
66902a3cfd
Remove blank lines.
1999-03-24 06:14:18 +00:00
17ab98299b
Fix minor formatting error.
1999-03-06 11:57:20 +00:00
4300219122
Fix minor formatting error.
1999-03-06 11:51:48 +00:00
53d349a107
Update for recent changes: component labels, clean bits, adding hot
...
spares, and rebuilding components in-place. Re-arrange the
letters/options to make more sense (and make better use of the alphabet).
1999-03-02 03:13:59 +00:00
ae9b468dbe
Clean things up a bit. Teach raidctl a little about component labels
...
and hot-adding of spares. New code is there, but not enabled (yet).
1999-02-24 00:03:12 +00:00
73b35dd2b4
fix typo
1999-02-18 07:54:33 +00:00
068fe3dab2
Add missing NetBSD RCS ID's! Thanks to SAITOH Masanobu (msaitoh@netbsd.org)
...
for pointing this out.
1999-02-04 14:50:31 +00:00
e8d64a5862
Never used, and certainly no longer needed.
1999-01-26 02:46:26 +00:00
543c143bd8
Take care of a few minor things due to the major RAIDframe cleanup.
...
Again, no functionality changes.
1999-01-26 02:40:02 +00:00
482f72a42c
no need for CWARNFLAGS; ../Makefile.inc sets WARNS=1
1999-01-18 04:48:01 +00:00
3740dde63b
Allow CFLAGS to be set in /etc/mk.conf
1999-01-17 18:53:59 +00:00
93bf4aae36
recover from errno.h changes
1999-01-12 22:58:10 +00:00
8305a06f33
Fix tpyo.
1999-01-10 01:34:37 +00:00
da5f0873c9
fix compile errors on the alpha.
1998-11-23 00:18:40 +00:00
ed77a60f62
Oops. Forgot the man-page for 'raidctl' when the rest of 'raidctl' went in.
1998-11-13 13:16:46 +00:00
f675e35d77
RAIDframe, version 1.1, from the Parallel Data Laboratory at
...
Carnegie Mellon University. Full RAID implementation, including
levels 0, 1, 4, 5, 6, parity logging, and a few other goodies.
Ported to NetBSD by Greg Oster.
raidctl is our userland configuration tool for RAIDframe.
1998-11-13 04:34:02 +00:00
oster