In determining when to stop reading segments when counting bytes (-b flag),
total the sizes of the blocks we're actually writing instead of assuming
they are all full blocks: many could be fragments or inode blocks. This
increases the number of segments per Ifile write, markedly improving the
efficiency of the cleaner in the small file case.
indirect block when considering the cleaning of block numbers less
than NDADDR (which do not use indirect blocks).
Also, note the loss of only half a block per segment to fragmentation
when considering the benefit function, rather than a whole block.
- avoid double slashes when displaying man pages (got tired
of '/usr/share/man//cat1/man.0').
- got rid of __P() while working on it.
- incorporate some of my old notes explaining how manpath works into the
comments of the code itself.
- renamed some of the vars so that the code is consistent throughout
(and hopefully clearer and easier to understand)
- fixed relative man paths for multiple man pages (man did a chdir()
on the first man page it had to format --- this broke any remaining
relative path man pages left to process). save old directory and
fchdir() back to it after formatting.
- improved doc on "man -h" which does more than just whatis(1) [e.g.
"man -h fopen" prints the required include files and the prototypes
rather than just the one-liner you get with whatis(1)]
- manconf.c now fills in the "len" length field in the TAG/ENTRY
structures (man now uses len).
revise man.conf file reading stuff to return error on failure in
addentry/gettag (fka getlist) rather than just err()ing out. this
allows man(1) to call cleanup and delete its tmp files rather than
just leave them floating. revise other apps using this code
(makewhatis, apropos, catman, whatis) to expect this. also remove
__P on updated files.
cleaner, but with more legible code.
Includes code for reading and writing to the raw disk device (so that an
unmounted fs could be cleaned), for the use of a single daemon to clean
multiple filesystems to save on resources, and for recording the old
contents of cleaned segments to offline storage for regression testing of
the LFS system as a whole; though these new features are not properly
tested at this point.
free() call, change the allocation policy to leave the responsibility for
allocation/freeing the pathname to _rtld_map_object(), instead of having
the caller allocate it and _rtld_map_object() free it. This simplifies the
code a lot and it is more efficient.
"Fix a bug that showed up when debugging dynamically linked programs.
References from GDB to "printf" and various other functions would
find the versions in the dynamic linker itself, rather than the
versions in the program's libc. This fix moves the GDB link map
entry for the dynamic linker to the end of the search list, where
its symbols will be found only if they are not found anywhere else."
"printf" isn't true for us, but various libc symbols are, e.g. "malloc".
Fixes PR 32074 as noted by uwe@
OK'd by christos@
declaration too.
32-bit SuperH can not pretend that _GLOBAL_OFFSET_TABLE_ is a normal
variable, because of the way PIC variable references is generated, but
as compiler arranges for _GLOBAL_OFFSET_TABLE_ address to be in r12
anyway, just use that value by declaring it as a global register
variable. Makes sh3 compile with RTLD_DEBUG.
_rtld_find_symdef use _rtld_symlook_default.
This reduces the code size and means that dlsym(RTLD_DEFAULT,...) has the
correct lookup order.
Reviewed by kleink. Thanks.
only the second part of the previous revision was needed.
put the logic for the initial icache invalidation of the PLT
back the way it was, but in a way that makes clearer what's going on,
and add some comments explaining it.
This allows for setting the passive socket's SO_RCVBUF. Option works
similarly to the current sendbufsize configuration option.
* Change how recveive_data() works
When reading data from the socket for passive transfers to the server,
receive_data() now works very similar to send_data_with_read(). Reads
from the network are now done using either the filesystem block size or
the configuration option readsize chunks.
* Crank version.h
[Changes discussed with lukem.]
ftpd will listen on the default FTP port for incoming connections and fork
a child for each connection. This is lower overhead than starting ftpd from
inetd(8) and thus might be useful on busy servers to reduce load.
Inspired by FreeBSD.
Reviewed by lukem@.
* Improve some comments and (error) messages.
* Use EXIT_FAILURE and EXIT_SUCCESS.
* Add function `maybe_syslog' (only log when -l is enabled).
Reviewed by christos.
(What would one look at for Kerberos?)
* Be a bit more explicit about the security implications of rsh & friends,
as suggested by Steven M. Bellovin and OK'd by Christos Zoulas
with MKPIC=no, possibly because the target does not support shared
libraries, these include libraries required to resolve all symbols
which end up referenced from PAM-using applications. The libraries
presently required are -lcrypt, -lrpcsvc and -lutil.
Add use of these variables which are currently set up to use PAM,
so that they compile when MKPIC=no.
Also, in the telnetd case, reorder the order of the libraries, so
that libtelnet.a comes before -ltermcap and -lutil, again to fix
link error when MKPIC=no.
Discussed with thorpej and christos.
This adds a -L to all ls command arguments so that the file or directory
the link references is listed rather than the link itself. This was
inspired by IRIX ftpd's -S option.
[Discussed with lukem some time ago.]
* Crank version.h [right Luke? :-)]
* Adapt lfs_cleanerd to use the fcntl call to get the Ifile filehandle,
so it need not be in the namespace.
* Make lfs_cleanerd be more careful when there are very few available
segments.
* Remove the Ifile from the filesystem namespace. The cleaner now uses
a fcntl call on the root inode to find the Ifile filehandle.
* Make lfs_cleanerd less verbose when the filesystem is unmounted.
- Fix how _rtld_relocate_nonplt_self deals with REL32 relocations.
- Change the assert so that it is correct for binutils 2.14 and 2.15.
There are still problems with the libraries generated with binutils 2.15,
but at least ld.elf_so doesn't crash.
that is required to change their password will not be allowed FTP
access. Inspired by similar functionality in other FTP daemons.
(approved by lukem)
* Crank version to 20041119 per lukem's request.
a particular user if the first tty is not writable. This broke in
revision 1.9 when it was strl'ified incorrectly (hi itojun). Thanks
to enami for spotting this.
* Fix yacc parser error recovery so that setjmp(3)/longjmp(3) is unnecessary.
* Fix SIGURG handler to set an urgflag that's later tested, rather than
abusing setjmp(3)/longjmp(3).
* Use "volatile sig_atomic_t" as the type of variables modified by sig handlers.
* Use sigaction(3) instead of signal(3) to set the signal handlers.
* Only set the main SIGALRM handler once. If we need to change it,
cache the old handler and restore appropriately...
* Remove a bunch of signal races by improving the signal handlers.
* Fix memory leak with 'ESPV ALL'.
My stuff:
* Clean up the debug message in reply(); use vsnprintf(3) instead of vsyslog(3).
* Rework parsing of OOB commands to _not_ use the yacc parser, since the
latter isn't reentrant and the hacks to work around that are ugly.
We now examine urgflag at appropriate locations and call handleoobcmd()
if it's set. Since the only OOB commands we currently implement are
ABOR and STAT, this isn't an issue. (I also can't find the reference in
RFC2228 where MIC, CONF & ENC are OOB-only commands. Go figure.)
I could clean up the is_oob stuff some more, but the remaining stuff
in ftpcmd.y is harmless and it's unnecessary churn right this moment.
around the delimiters (commas and colons). Also, at the end of
the "RESPONSE TYPES" section for "USERID" it is explicitly noted
that any spaces after the colon following the OSTYPE field *are*
part of the identifier.
versions used by others in libc weak, so that we have:
name: weak
__name: weak
___name: strong
- Add __name strong aliases of the dlfcn names in ld.elf_so, so that we have:
name: strong
__name: strong
This allows ld.elf_so to self-resolve both the name and __name variants
of the dlfcn functions, the former being required for dlfcn support in
applications, the latter being required for dlfcn support in libc.
Fixes the problem described in:
http://mail-index.netbsd.org/tech-toolchain/2004/07/17/0000.html
Reviewed by Nick.
sysctl variable name in /etc/ld.so.conf. It also makes the ld.elf_so
binary slightly smaller (at least on i386), and has no impact on
performance.
Fixes PR 26100.
one command line option to specify which firewall it is meant to interact
with. The implementation here puts the firewall specific code into separate
files with markers for future changes that could enable a fully transparent
mode for non-private network proxying.
mrg