augustss
23bcab075a
Don't request sense after INQUIRY. From FreeBSD & OpenBSD.
2000-04-28 21:34:05 +00:00
augustss
d2e2dce826
Regen.
2000-04-28 20:54:39 +00:00
augustss
0b9c397110
Add 2 more eap audio devices.
2000-04-28 20:54:10 +00:00
is
4cacfc5684
change 10base-t media _setting_ to set autodetect instead.
...
Contrary to what the rtl8019 docs say, this seems to be necessary.
Observed by myself when implementing non-auto earlier, and independently
complained about by Antti Kante in PR 9962.
2000-04-28 17:49:03 +00:00
uch
bbb8c56fcb
add PCI_MAPREG_PPB_END (PCI-PCI bridge) PCI_MAPREG_PCB_END (PCI-Cardbus bridge)
2000-04-28 17:12:45 +00:00
augustss
308fa27a0d
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 12:39:59 +00:00
jdolecek
520f9dc581
pasfind(): avoid silly bug - if bus_space_map() of SB I/O space failed,
...
we used bad label and tried to bus_space_unmap() invalid memory
region
Fixes port-i386/9992 by Jarkko Teppo <jate@uwasa.fi>.
2000-04-28 08:51:42 +00:00
tsutsui
61e3f39169
Fix copyright notice as per request from the author.
2000-04-28 03:48:56 +00:00
bouyer
fcf693203f
More big-endian fixes from Izumi Tsutsui.
2000-04-27 16:49:07 +00:00
augustss
30c20f930f
Change my email address.
2000-04-27 15:26:44 +00:00
augustss
91878e8679
Reorder some #defines.
2000-04-27 15:25:36 +00:00
bouyer
fe54b787dc
Add NetBSD RCS Id and copyrigth notice.
2000-04-27 14:08:09 +00:00
bouyer
bf7a94ec2b
Fix copyrigth notice.
2000-04-27 14:06:57 +00:00
bouyer
2fb93595b2
Note siop changes.
2000-04-27 12:48:59 +00:00
oster
db11351ced
Make sure the config structure allocated during autoconfiguration actually
...
gets initialized properly. Should fix PR#9816.
2000-04-27 00:57:48 +00:00
bouyer
ce7f4dafe1
Big-endian fixes from Izumi Tsutsui.
2000-04-26 20:00:31 +00:00
thorpej
ef25b7769e
Regen.
2000-04-26 17:30:59 +00:00
thorpej
0defe75e76
Add product ID for the PLX Technology 9060ES PCI bus controller. Note this
...
ID isn't normally seen, as just about every device with a PLX on it loads
a different ID from an EEPROM, but there's no harm in documenting it.
2000-04-26 17:30:35 +00:00
ad
d5d441a516
- Bump xfer size limit to the maximum allowable.
...
- 20 CCBs is enough to maintain a constantly stuffed inbound FIFO.
2000-04-26 15:58:01 +00:00
ad
75bb77ed56
- Rearrange some spl*() calls to be as intended.
...
- Scan cac_cd in cac_shutdown(), don't use a SIMPLEQ.
2000-04-26 15:54:02 +00:00
tsutsui
b4f524c223
- Allocate mbuf dynamically on Tx and use bus_dmamap_load_mbuf(9).
...
- Call bus_dmamap_sync(9) as appropriate.
- Leave only register declarations in rtl81x9reg.h and
split other stuff into rtl81x9var.h.
bus_dma(9) code mostly taken from thorpej's if_rtp.c.
2000-04-26 14:02:34 +00:00
thorpej
8b8597dae0
Recognize the Crystal CS4297A codec, and add a couple of macros
...
to manipulate AC97 codec IDs.
2000-04-26 00:00:41 +00:00
bouyer
eba93ce7d2
Ops, need to restore correct DSA value after a phase mismatch, we may have
...
been interrupted during a S/G operation.
2000-04-25 20:02:33 +00:00
bouyer
88be4752d0
- Change the script to start new commands in an asyncronous way, using
...
'command slots' in which the host can put command and wait for the script
to start them
- Change siop.c to do full disconnect/reslelect, allowing as much as one
command per target/lun to run in parallel.
- Fix bug in registers init where a board without BIOS would end at
ID 0 (now the driver works on alpha too).
- better handling of messages, sending back a MSG_EXT_SDTR in response to an
incoming MSG_EXT_SDTR, and MSG_MESSAGE_REJECT for unhandled messages.
- fix use of bus_dmamap_sync() and htole32().
- supports shared interrups
- change some int8 and int16 to int, for alpha and mips benefits ( suggested by
Toru Nishimura)
2000-04-25 16:27:05 +00:00
bouyer
5ee6872b46
- Add support for NOP instruction
...
- fix dsp value for second operand of memory move, so that patch list will be
correct.
2000-04-25 16:01:16 +00:00
augustss
df70862e8c
Insert (very conservative!) bus_space_barrier() calls at all register accesses.
...
The bus_space(9) man page says you've gotta have them...
2000-04-25 14:28:13 +00:00
tsutsui
6369b56c99
Fix two endian problems. rtk now works on macppc.
...
- Use le32toh() on reading rxstat from the Rx DMA buffer.
- rl_read_eeprom() should return EEPROM values in little endian
when caller requires byte-stream data.
bus_dma(9) fixes are still on-going.
XXX rtk on macppc seems to make tons of CRC errors...
XXX Does it work fine on i386 or others?
2000-04-25 14:16:46 +00:00
augustss
74beeca710
Move the size of the mapped bus_space region into the bus independent softc.
2000-04-25 09:20:54 +00:00
augustss
aae26d0d0c
Move a test if the MIDI is open outside a loop in the interrupt routine.
...
Some stylistic changes.
2000-04-24 17:55:24 +00:00
tsutsui
6f9392b42a
Merge changes of sys/pci/if_rl.c rev. 1.8->1.10. (from kern/9870)
...
Also remove unused pbase, vbase and PCI_CAP_PWRMGMT declarations.
2000-04-24 15:25:00 +00:00
augustss
4d0217d2c1
Remove item.
2000-04-23 23:21:32 +00:00
augustss
007a7dbfd8
Update with new files.
2000-04-23 23:19:36 +00:00
augustss
0e5c7f55af
Regen.
2000-04-23 19:35:35 +00:00
augustss
23f3c0074f
Sync with FreeBSD: add two more adapters.
2000-04-23 19:03:45 +00:00
thorpej
0cde36f780
Carve off the ISA configuration bits from the floppy driver. Driver is
...
still ISA-specific, but we can attach ISA instances with different
configuration mechanisms now.
2000-04-23 16:47:45 +00:00
augustss
b12ed6c03b
Make it possible to move a device to its unconfigured state by
...
using config #0 .
2000-04-23 00:46:59 +00:00
augustss
bc5e86601e
Add an item.
2000-04-22 22:52:15 +00:00
augustss
3a27942ba8
Add a clarifying comment.
2000-04-22 22:50:44 +00:00
thorpej
8ec60a189f
Make sure the payload is aligned when using E2-over-802.11 encapsulation,
...
as enabled by the LINK0 flag. Fixes PR kern/9700.
2000-04-22 22:36:14 +00:00
augustss
5ea1af4bf4
Regen.
2000-04-22 18:07:19 +00:00
augustss
f468f877de
Add some CMedia audio devices. From T.SHIOZAKI <AoiMoe@imou.to>
2000-04-22 17:32:02 +00:00
ragge
11379e0ab6
Add the famous "rl" disk.
2000-04-22 16:46:45 +00:00
augustss
84f24d3c29
The D-link serial adapter lies about being self powered. It's obviously
...
bus powered. How can we do power budgeting when the devices lie?
2000-04-21 21:02:44 +00:00
augustss
60bb0d050d
Add some comments.
2000-04-21 20:58:56 +00:00
explorer
d592132506
the status register is _always_ at 0x420 -- grr. How should I put this in the config file rather than hard-coded?
2000-04-21 20:13:41 +00:00
augustss
46fb8de93a
Use a 255 ms interrupt interval even if the descriptor in the hub asks
...
for something else, because the spec says that it should be 255.
2000-04-21 19:51:43 +00:00
augustss
6bc85d9fa0
Minor nit: Use another TAB in formatting to make the columns straight.
2000-04-21 19:49:59 +00:00
ragge
171d9f6a3f
First version of keep-track-of-used-devices file.
2000-04-21 19:05:43 +00:00
augustss
4379f92630
Make sure to read the full hub descriptor (including the deprecated field).
2000-04-21 18:57:40 +00:00
bouyer
19ada4a82a
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller
...
(the name 'siop' is still being discussed, may change).
Only basic disconnect/reselect for now, no sync/wide negotiation.
Tested with 810A, 875 and 895 on i386 only.
The bus-independant part should also be able to handle the 53c720 and 53c770.
A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 17:56:58 +00:00