39764a5363
Use IF_IS_EMPTY and IFQ_IS_EMPTY instead of accessing queue members
...
directly. Noticed by Thomas Klausner.
2002-02-10 15:17:21 +00:00
e8aa4b2c2a
Fix typo in comment.
2002-02-10 15:13:43 +00:00
654b815d7b
Add the Ethertype for 802.3x flow control packets.
2002-02-10 01:28:32 +00:00
9dd8465963
(1) Make if_index "wrap" at USHRT_MAX instead of going above it so
...
that other parts of the kernel won't lose gratuitously. There are
places where it's assumed that it won't grow that large.
(2) Avoid accidental reuse of occupied slots in the ifindex2ifnet[]
table.
2002-02-09 05:56:34 +00:00
727264d2c9
Avoid any non-error output for normal operations, only print those
...
messages if the interface is set to debug.
2002-02-01 13:50:00 +00:00
6446e841ec
Tweak the slow-but-persistent connection reestablishment timeout, retrying
...
is not realy expensive - do it once every minute.
Prevent the MTU from being set bigger than what we can handle.
2002-02-01 13:40:16 +00:00
6121a90ba1
Fix copy&pasto: truncate strings copied in at *their* right length, not
...
some other strings length.
Found by Arne Helme.
2002-01-21 11:37:29 +00:00
ec531589ce
couple cosmetic style fixes, and drop ^L's
2002-01-18 22:39:12 +00:00
301dca6ef4
Make fields in ioctl parameters that are not allowed to be negative u_ints.
...
Better range & sanity checking for ioctl arguments (thanks, Jaromir!)
2002-01-15 12:28:08 +00:00
67dfac7357
Include <machine/intr.h> unconditionally, instead of only doing so if
...
__HAVE_GENERIC_SOFT_INTERRUPTS and relying on <sys/param.h> to provide it
otherwise; pointed out by Aymeric Vincent.
2002-01-14 18:19:15 +00:00
c095bf1b6d
As discussed with Aymeric, <machine/intr.h> is always required, so don't
...
make its inclusion conditional.
2002-01-14 16:10:33 +00:00
8cae495fc0
Don't include machine/types.h (my fault in previous commit)
...
Reported by Klaus Klein.
2002-01-14 16:04:44 +00:00
78ce6cb0f8
Initialize the activity timestamp when opening a connection. Only idle-
...
timeout connection that made it to phase NETWORK yet. (For drivers using
the internal timeout mechanism; isdnd, that does the timeout handling for
ISDN drivers, still needs to be fixed.)
Thanks to Wolfgang Solfrank for finding this.
2002-01-14 07:39:14 +00:00
24443412ff
include machine/types.h
...
include machine/intr.h if defined(__HAVE_GENERIC_SOFT_INTERRUPTS)
It makes this file compile for the amiga.
2002-01-13 10:57:57 +00:00
da249d7da1
Implement a retry counter for failed authorizations and limit it to
...
a configurable maximum (default: 5).
Some ISPs shut down accounts (at least temporarily) after to many bad
retries. This hit me recently due to a stupid pilot error and the fast
retry rate.
2002-01-07 10:49:02 +00:00
45514531fd
Implement an activity timestamp, recording the last time payload data
...
passed through.
Implement optional idle timeout.
2002-01-06 20:14:29 +00:00
ce4f05c0a3
Fix LP64 printf format problem.
2002-01-05 19:26:44 +00:00
a9309d4f18
Ooops, forgot to commit this file when doing the great if_spppsubr.c
...
rotottil. Thanks to Launey Thomas for pointing this out.
2002-01-05 00:54:07 +00:00
99772f59c4
Move net/if_sppp.h to net/if_spppvar.h, create a new net/if_sppp.h
...
containing the userland visible thinks (i.e. ioctl definitions).
Remove all (both) old ioctls, as they had a brain dead API and made keeping
binary compatibility more or less impossible.
Replace by several new ioctls. While there, remove any arbitrary limits
(resulting from the old, broken ioctls) and allow any length of names
and passwords.
2002-01-04 12:21:24 +00:00
17da611b51
Fix a "pointers are not permitted as case values" gcc 3.1 warning.
2001-12-31 21:55:46 +00:00
c9dee7e411
Do not provide memcpy()/memset()/memcmp() macros as wrappers
...
around b*() functions (!!).
2001-12-23 22:36:16 +00:00
745e191850
move protosw fragment for gif/stf to their own source code.
...
reduce #ifdef in stf code. sync with kame
2001-12-21 03:21:50 +00:00
14dad29d69
whitespace and comment. sync with kame
2001-12-21 02:50:02 +00:00
61eb776b48
Remove yet another spurious (debug?) output.
2001-12-16 23:55:28 +00:00
b2bd90b630
Cleanup softc more completely on "ifconfig down", but only if we are
...
currently in a connection reestablishement state.
The previouse (incomplete/unconditional) cleanup confused the state machine.
2001-12-16 23:53:31 +00:00
729b826ecd
Fix packet accounting (now netstat -i and netstat -ib show reasonable
...
values).
Implement a secondary connection-reestablishement mode, which is only
entered after (1) we have successfully transfered payload data over this
connection and (2) if initial retries did not reestablish a session.
In this mode we retry (infrequently) forever, until adminstrator stops
us (by "ifconfig ppppoe0 down"). XXX - need to display this mode in
pppoectl.
It is now possible to pull the DSL modems plug for say 15 minutes, plug
it back in again and just wait. The connection will be reestablished within
three minutes.
2001-12-16 11:40:52 +00:00
c8006a73d3
Remove some spurious (debug?) output.
2001-12-16 00:55:40 +00:00
7801c694b0
Enable additional error messages for the discovery phase, clarify some
...
others. Change one timeout slightly - we need to make all others user
settable.
2001-12-15 20:43:31 +00:00
f19c69323c
Make reconnects after LCP keepalive detected an error actually work.
2001-12-15 20:40:37 +00:00
f77397d481
Use __sh__ instead of __sh3__.
2001-12-14 23:30:02 +00:00
8b3d9b9497
Enable active LCP keepalive handling in the PPP layer, the PPPoE layer
...
itself has no means to detect broken connections.
2001-12-10 23:23:24 +00:00
0099682916
Now that everything works without LINK1 set, do not set it by default.
...
While here, remove an unnecessary splnet()/splx() pair.
2001-12-10 00:24:12 +00:00
d585188042
We explicitly close LCP when going to state CLOSED, so we better open
...
it again when going from INITIAL to STARTING. This has been done for
passive or auto-conecting interfaces always, but not for permanent
ones.
This fixes session reestablishement for PPPoE interfaces without LINK1 set,
and probably also closes PR kern/11161.
Thanks to Jared D. McNeill and Ross Harvey for sugesting debug methology.
2001-12-10 00:22:21 +00:00
b1554100e7
Change the way IPCP negotiation is handled.
...
Collect both local and remote address and set them to the interface in
one step (the peer adress was not set at all before).
This causes the peer address now to show up on the interface and all
messages to the routing socket to be send with correct data. The latter
has been the last missing piece to complete PPPoE support.
2001-12-08 19:46:39 +00:00
cbaa950b62
code cleanup for portability
2001-12-04 21:32:15 +00:00
42ceb2f007
Add an #if defined(INET) ... around if_detach_queues's declaration to match the
...
one around its definition.
2001-12-02 19:44:25 +00:00
6e766675c6
Fail early when trying to identify a pppoe interface softc (from a
...
HOST UNIQUE token) and our list of interfaces is empty. Without this
test an unitinalized pointer may be dereferenced.
2001-12-01 18:25:23 +00:00
113024244c
Make it compile in the absence of networks. Closes PR 14274 (mine).
2001-11-27 17:32:57 +00:00
86c6c53869
Sanity check the tunnel route after computing it and don't mark the
...
interface up if there is no route or the route loops back to ourself.
This helps to avoid pilot errors which would result in kernel stack
overflows.
2001-11-24 15:46:08 +00:00
c21931cf1d
Make this respect down interfaces.
2001-11-24 00:21:27 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
1e6d430c86
Someone <sys/param.h> was deleted from the includes list. Add it
...
back so that this file compiles again.
2001-11-15 07:01:27 +00:00
64a432d965
remove unnecessary #if NFOO > 0 .... #endif wrappers
2001-11-13 00:49:35 +00:00
34d65a3414
add RCSIDs
2001-11-12 23:49:33 +00:00
3048d543d3
Use the (not so-)newly-allocated IFT_ECONET rather than IFT_OTHER. This means
...
that programs start printing Econet link-layer addresses corrctly.
2001-11-12 20:19:04 +00:00
54407dd7d8
Sync with IANA. This finally gets us IFT_ECONET.
2001-11-07 12:14:17 +00:00
087b694325
too many curly brace.
2001-11-06 08:14:27 +00:00
b26f63f404
Fix pr#14481
2001-11-06 06:26:34 +00:00
b5e785f38d
Switch to using queue access macros instead of refering to the member
...
fields explicitly.
2001-11-05 18:02:15 +00:00
6e885d365a
Turn the tun device/network interface into a cloning device.
2001-10-31 20:08:17 +00:00
martin